多视场星敏感器结构参数标定方法

提出一种基于星间角距不变原理的多视场(FOV)星敏感器结构参数标定方法.这种方法以欧拉角表征多视场星敏感器各个子视场之间的旋转关系,利用识别得到的各个视场星点的坐标信息和赤经赤纬信息,计算出多对星光矢量来建立标定模型和目标函数,然后使用L-M算法优化目标函数并解算出各个子视场之间的结构参数.此方法不需要外部姿态测量仪器辅助,可用于在轨和地面标定.在全天球随机抽取多个姿态生成多视场的仿真星图用于标定,并采用星内角统计偏差作为结构参数标定精度的评价指标.这种方法能够准确求解多视场星敏感器的结构参数.星内角统计偏差的平均值在星点位置噪声标准差为0.1像素的仿真试验中为1.3",在外场观星的实际试验中为6.4".      

Instantaneous BeiDou–GPS attitude determination: A performance analysis

The advent of modernized and new global navigation satellite systems (GNSS) has enhanced the availability of satellite based positioning, navigation, and timing (PNT) solutions. Specifically, it increases redundancy and yields operational back-up or independence in case of failure or unavailability of one system. Among existing GNSS, the Chinese BeiDou system (BDS) is being developed and will consist of geostationary (GEO) satellites, inclined geosynchronous orbit (IGSO) satellites, and medium-Earth-orbit (MEO) satellites. In this contribution, a BeiDou–GPS robustness analysis is carried out for instantaneous, unaided attitude determination.     

Attitude determination of planetary exploration rovers using solar panels characteristics and accelerometer

In this study, we propose a new attitude determination system, which we call Irradiance-based Attitude Determination (IRAD). IRAD employs the characteristics and geometry of solar panels. First, the sun vector is estimated using data from solar panels including current, voltage, temperature, and the normal vectors of each solar panel. Because these values are obtained using internal sensors, it is easy for rovers to provide redundancy for IRAD. The normal vectors are used to apply to various shapes of rovers. Second, using the gravity vector obtained from an accelerometer, the attitude of a rover is estimated using a three-axis attitude determination method. The effectiveness of IRAD is verified through numerical simulations and experiments that show IRAD can estimate all the attitude angles (roll, pitch, and yaw) within a few degrees of accuracy, which is adequate for planetary explorations.     

GNSS多频观测对定姿精度的影响分析

针对单历元定姿的精度问题,对多频双差观测模型下的定姿精度进行了理论推导,分析了影响定姿精度的各种因素,并着重研究了GPS和Galileo系统下多频观测值对定姿精度的改善程度。理论分析和仿真实验均表明．相比于单频定姿,多频观测可以显著提高定姿精度。     

一种改进的基于双矢量观测的姿态确定算法

为了提高飞行器姿态确定的精度和姿态矩阵的解算速度,提出了一种改进的双矢量定姿算法.这种算法利用测量系统的方差对两个观测矢量进行加权处理,求得一个新的矢量,以两观测矢量夹角为判断依据选取加权系数;以新矢量为基准矢量,利用双矢量定姿算法求解姿态矩阵,并对求得的姿态矩阵进行修正.仿真结果表明:这种算法所需时间为优化算法的50%,当两个传感器测量误差不同、两矢量为任意夹角时,这种算法比优化的双矢量算法精度高;当两个传感器测量误差相同时,除了两矢量夹角为90°外,这种算法均比优化的双矢量算法精度高.     

改进的Sage—Husa滤波及在卫星姿态估计中的应用

基于极大后验估计原理,提出了一种改进的噪声估计器,以实现对噪声均值和方差的在线估计,抑制滤波器发散。对自适应扩展卡尔曼滤波算法在卫星姿态确定系统中的应用进行了仿真。结果表明新算法滤波精度优于扩展卡尔曼滤波（EKF）,与Sage—Husa自适应滤波算法相比,可阻止滤波器发散,提高系统滤波精度。     

全自动快换装置精准对接技术

当抢险救援机器人腕部的全自动快换装置(full-AQHCD)自动锁紧属具接口即下耦合件(LCP)时,要同步精准对接和自动接通下耦合件的液压管路,为此,分别提出了数字量测量条件下和模拟量测量条件下精准对接理论(PDT),分别用于指导产品阶段和样机阶段的生产。产品阶段的精准对接理论是:把全自动快换装置视为被动目标,把下耦合件视为主动目标;通过4个耦合点实现全自动快换装置与下耦合件的连接;通过测量分别建立被动目标坐标系(X_1O_1Y_1)、主动目标坐标系(X_2O_2Y_2)与精准对接坐标系(XOY)之间的位姿关系;将被动目标对接点X_1O_1Y_1坐标变换到XOY坐标,再变换到主动目标对接点X_2O_2Y_2坐标;根据主动目标对接点X_2O_2Y_2坐标对主动目标对接点进行调姿以实现精准对接被动目标对接点;最后固定主动目标对接点。样机阶段的精准对接理论是:把全自动快换装置视为被动目标,把下耦合件视为主动目标;不完工被动目标布线舱,从而暴露出工作舱类似扳手空间的操作空间;通过4个耦合点实现全自动快换装置与下耦合件的连接;另外布置油源,在操作空间中先"对接"液压管路,再"测量、调姿和最后固定"主动目标的液压管路;完工被动目标布线舱。对上述2种条件下理论进行了仿真验证。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

天基照相跟踪空间碎片批处理轨道确定研究

随着国内外天基观测空间碎片研究的展开,文章提出了利用跟踪卫星的CCD(Charge
Coupled Device)相机对空间碎片进行轨道探测的方法,首先建立了CCD照相观测模型和基于 照相观测 的空间碎片批处理轨道确定模型。通过对CCD相机底片归算方法的分析可知,利用
CCD相机所获得的观测数据与跟踪卫星的姿态无关,且其精度只与测量和坐标转换计算的精 度有关,在测量和计算中可获得较高的精度。分别对分布密度较高的低轨道和地球同步 轨道区域的空间碎片进行了定轨分析。仿真结果表明,定轨时采用两个跟踪弧段的照相数据 定轨精度大大高于一个弧段照相数据的定轨精度;跟踪卫星距离空间碎片越近,定轨精度越 高;低轨道空间碎片的定轨精度高于地球同步轨道上的空间碎片定轨精度。
     

一种近地航天器脉冲星地固系动力学定轨方法

为改善近地航天器脉冲星导航的定轨精度,设计一种地固系动力学定轨方法。该方法结合了更精确的地球引力场模型,在求地球引力势梯度基础上引入惯性力,建立了地固系下轨道动力学方程;并结合脉冲相位量测,使用扩展卡尔曼滤波实现航天器轨道参数实时估计。此方法可以降低动力学方程非线性度,尤其适用于地球静止轨道卫星。通过数学仿真校验了新方法的有效性与精度。