基于状态维修的预防性维修策略优化模型研究

基于状态的维修着眼于系统的具体运行状况,对被监测装备的真实状态进行评估,克服了维修的盲目性,可有效减少由于维修不足而引起的意外故障和由于维修过剩带来的资源浪费。提出一种基于状态的多部件系统非周期预防性维修计划的优化方法,引入"机会维修阈值"概念,优化不同维修方式转移概率的表达式,将多个维修作业按照机会维修阈值进行归并,运用马尔可夫决策过程理论,给出不同维修方式转移概率的表达式和目标函数,并进行算例分析。结果表明:提出的优化模型减少了预防性维修活动,节约了维修工时和经费,可为系统预防性维修策略决策提供参考。     

浅析民用飞机研制总体参数优化

分析了在概念设计阶段民用飞机总体设计工作内容和工作流程,并结合时下国外在用软件优缺点,构思了民用飞机总体设计参数综合优化的技术方案,包括优化设计架构、分析模型和优化算法等,为形成具有自主知识产权的民机总体设计综合分析和优化程序打下基础。     

Shaping low-thrust trajectories with thrust-handling feature

Shape-based methods are becoming popular in low-thrust trajectory optimization due to their fast computation speeds. In existing shape-based methods constraints are treated at the acceleration level but not at the thrust level. These two constraint types are not equivalent since spacecraft mass decreases over time as fuel is expended. This paper develops a shape-based method based on a Fourier series approximation that is capable of representing trajectories defined in spherical coordinates and that enforces thrust constraints. An objective function can be incorporated to minimize overall mission cost, i.e., achieve minimum $\mathrm{\Delta }V$. A representative mission from Earth to Mars is studied. The proposed Fourier series technique is demonstrated capable of generating feasible and near-optimal trajectories. These attributes can facilitate future low-thrust mission designs where different trajectory alternatives must be rapidly constructed and evaluated.     

Reliability-based trajectory optimization using nonintrusive polynomial chaos for Mars entry mission

This paper presents the reliability-based sequential optimization (RBSO) method to settle the trajectory optimization problem with parametric uncertainties in entry dynamics for Mars entry mission. First, the deterministic entry trajectory optimization model is reviewed, and then the reliability-based optimization model is formulated. In addition, the modified sequential optimization method, in which the nonintrusive polynomial chaos expansion (PCE) method and the most probable point (MPP) searching method are employed, is proposed to solve the reliability-based optimization problem efficiently. The nonintrusive PCE method contributes to the transformation between the stochastic optimization (SO) and the deterministic optimization (DO) and to the approximation of trajectory solution efficiently. The MPP method, which is used for assessing the reliability of constraints satisfaction only up to the necessary level, is employed to further improve the computational efficiency. The cycle including SO, reliability assessment and constraints update is repeated in the RBSO until the reliability requirements of constraints satisfaction are satisfied. Finally, the RBSO is compared with the traditional DO and the traditional sequential optimization based on Monte Carlo (MC) simulation in a specific Mars entry mission to demonstrate the effectiveness and the efficiency of the proposed method.     

基于故障行为的惯导产品贮存寿命试验设计

以典型惯导产品加速度计贮存寿命评估为例,提出了一种基于故障行为模型的加速退化试验设计方法,解决了缺乏预试验数据情况下试验应力水平设计的问题。在通过对产品特性和主机理分析基础上,确定表征产品贮存寿命特征参数及试验应力,构建了考虑材料等分散性的加速度计故障行为模型,用以描述参数加速时变规律的特性。在试验应力最高水平确定的情况下,基于给定置信度和故障行为模型,以高应力水平下退化量的置信下限与低应力水平下退化量的置信上限不交叉为原则,采用基于仿真的加速退化试验设计方法,优化确定低应力和中间应力水平,从而设计给出试验剖面,并给出了加速退化试验方案优选流程,最终从备选方案集中确定加速度计试验最优方案。通过实际案例分析,验证了该方法的有效性。      

多模函数优化的改进花朵授粉算法

为了探讨花朵授粉算法（FPA）在解算多模函数优化问题中存在的不足,通过定义种群多样性及差异性指标,定性分析了FPA在多模复杂函数优化中的寻优缺点。基于模拟退火思想优化全局授粉过程,并利用Nelder-Mead单纯形搜索技术对花朵局部授粉进行重构,提出一种新的花朵授粉寻优架构。仿真结果表明,相对于基本的FPA、布谷鸟算法、萤火虫算法,改进花朵授粉算法能够有效避免陷入局部最优,具备优异的全局勘探和局部开采能力,对多模优化问题具有一定优势。      

跨声速层流翼型的混合反设计/优化设计方法

跨声速层流翼型设计须兼顾优良的超临界特性和自然层流特性,因而对设计方法提出了更高的要求。针对现有反设计方法和直接优化设计方法的不足,发展了一种适用于跨声速层流翼型的混合反设计/优化设计方法。该方法引入了基于经验的局部流场特征作为反设计目标,翼型性能指标作为直接优化设计目标,然后加权形成了混合反设计/优化设计总目标,并同时考虑了气动和几何约束。优化算法采用基于自适应并行加点技术的代理优化,流动数值模拟采用耦合基于线性稳定性理论的e^N转捩自动判定的雷诺平均Navier-Stokes（RANS）方程求解器。针对现代中短程民用客机需求,以NPU-LSC-72613翼型为基准,开展了层流翼型减阻的混合反设计/优化设计。分别将局部目标压力分布、总阻力作为反设计和直接优化设计目标,得到了较好的优化结果,验证了方法的有效性。经过2轮优化结果显示混合反设计/优化设计总目标显著下降。所设计翼型吸力面局部压力分布与目标压力分布基本一致,总阻力下降15.5%;吸力面和压力面层流范围均大于55%倍弦长,激波强度显著减弱,说明所设计翼型同时具有优良的超临界和层流特性。将所设计翼型配置到机翼上,通过三维数值模拟进行校验,结果显示所设计跨声速层流机翼升阻比提高了6.64%,在一定升力系数范围内,气动性能均有显著提高,验证了所设计跨声速层流翼型在机翼设计中的适用性。     

基于UG、Workbench平台航空发动机多盘转子结构自动优化方法

目前对航空发动机转子优化设计多限于单盘优化,且优化需要借助人工调整再优化。基于航空发动机转子优化设计常用软件平台数据交流方便和减少人工调整的考虑,提出了基于UG、Workbench平台航空发动机多盘转子结构自动优化方法。首先基于UG平台,对多盘转子结构进行参数化几何造型,借助生成的标准化模板,便于减少建模工作量及对同类盘的优化。然后基于Workbench平台,借助脚本语言（APDL、Python）二次开发完成对多盘转子结构状态变量提取,及自动优化流程控制。算例结果表明,在满足几何、强度要求条件下,优化后多盘转子结构质量减少了33%,应力分布更为均匀,且验证该方法具有良好的稳定性及精度。