The GFZ real-time GNSS precise positioning service system and its adaption for COMPASS

Motivated by the IGS real-time Pilot Project, GFZ has been developing its own real-time precise positioning service for various applications. An operational system at GFZ is now broadcasting real-time orbits, clocks, global ionospheric model, uncalibrated phase delays and regional atmospheric corrections for standard PPP, PPP with ambiguity fixing, single-frequency PPP and regional augmented PPP. To avoid developing various algorithms for different applications, we proposed a uniform algorithm and implemented it into our real-time software. In the new processing scheme, we employed un-differenced raw observations with atmospheric delays as parameters, which are properly constrained by real-time derived global ionospheric model or regional atmospheric corrections and by the empirical characteristics of the atmospheric delay variation in time and space. The positioning performance in terms of convergence time and ambiguity fixing depends mainly on the quality of the received atmospheric information and the spatial and temporal constraints. The un-differenced raw observation model can not only integrate PPP and NRTK into a seamless positioning service, but also syncretize these two techniques into a unique model and algorithm. Furthermore, it is suitable for both dual-frequency and sing-frequency receivers. Based on the real-time data streams from IGS, EUREF and SAPOS reference networks, we can provide services of global precise point positioning (PPP) with 5–10 cm accuracy, PPP with ambiguity-fixing of 2–5 cm accuracy, PPP using single-frequency receiver with accuracy of better than 50 cm and PPP with regional augmentation for instantaneous ambiguity resolution of 1–3 cm accuracy. We adapted the system for current COMPASS to provide PPP service. COMPASS observations from a regional network of nine stations are used for precise orbit determination and clock estimation in simulated real-time mode, the orbit and clock products are applied for real-time precise point positioning. The simulated real-time PPP service confirms that real-time positioning services of accuracy at dm-level and even cm-level is achievable with COMPASS only.     

基于实时SSR数据的LEO卫星精密单点定位研究

对目前低轨卫星实时定位的方法进行了研究,现在通常采用GPS定位,使用广播星历和普通晶振,实时定位精度一般在10m以内,不能满足高精度实时定位的需求。IGS组织在全球范围内对GPS跟踪分析,生成精密星历、精密钟差产品、按SSR格式的广播星历和钟差修正产品并在网上发布。对这些IGS产品进行了调查,提出在现有测控支持情况下,可以通过高密度上注SSR信息流实现在轨高精度定位。以某型号低轨微小卫星在轨导航增强载荷为应用背景,用IGS03产品中的1057和1058数据对双频GPS接收机的星历和钟差进行修正,采用递推最小二乘估计和LAMDA模糊度固定过对载波相位和伪距信息进行处理,在短时间内获得亚米级定位结果。     

舰载机着舰侧向轨迹增量控制

针对舰载机着舰侧向控制难度较大的问题,借鉴美国海军的“魔毯”(MAGIC CARPET)着舰的先进理念,提出了 1种新的着舰控制方法,即侧向轨迹增量控制。首先,分别从理论上分析了侧向常规控制、侧向轨迹增量控制的控制结构和着舰性能;然后,对 HUD显示符号进行改进;最后,通过实时仿真,比较了这 2种方法的着舰控制效果。结果显示,着舰侧向轨迹增量控制具有 3个优点:1)简易,降低了飞行员的操纵频次和负担;2)直观,着舰侧向操纵更直观,侧向杆量与飞机侧偏修正速率成正比例,而且当横杆回中时飞机能自动跟踪跑道中心线的横向漂移;3)鲁棒,显著提高了对侧风和舰尾流的抑制能力,即使在飞行员不操纵的情况下,飞机也能迅速反应和抑制风干扰。因此,建议在着舰工程中采用侧向轨迹增量控制。     

高稳定高可靠多平台兼容RTK 精密定位系统设计与实现

针对RTK精密定位系统存在的稳定性差、可靠性低、系统兼容能力低等问题，提出了高稳定高可靠多平台兼容RTK精密定位系统设计方法。该系统基于冗余式方法设计GNSS定位单元，以提高系统兼容性；基于工作距离设计冗余式修正信息交互方式，并设计了基于ARM+DSP架构的AM5728实时解算RTK修正信息，通过复合型高速通信链路共享信息。以精密标定点为参考测试其定位精度并采用CEP评估其定位精准性，评估结果表明，CEP=0.0071m，说明定位精度高且可靠性好，解决了稳定性差、可靠性低、系统兼容能力低的问题，有效弥补了RTK精密定位系统领域受限的不足。     

Precise orbit determination and precision comparison for FY3C and FY3D with receiver antenna GPS and BDS PCV using spaceborne BDS and GPS observation data

The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D.     

A real-time combined quality control method for GNSS precise positioning in harsh environments

Global Navigation Satellite System (GNSS) precise positioning can be significantly affected by severe multipath effects and outliers in harsh environments, and highly relies on quality control strategies. Previous studies mainly focus on the posterior residuals to check and exclude the outliers in GNSS observations, limited work emphasizes the combined quality control method considering both the prior and posterior knowledge simultaneously. This paper proposed a real-time combined quality control method to process the multipath effects and outliers in harsh environments simultaneously. Specifically, in the prior stage, a modified multipath processing strategy is proposed for both phase and code observations, then a modified detection, identification, and adaptation (DIA) method considering the maximum times of data snooping is studied in the posterior stage. Two dedicated experiments in real harsh environments were carried out to evaluate the performance of the proposed combined quality control method. For the static experiment, the proposed method exhibits smaller positioning errors, the best positioning accuracy, and the highest availability in this study. Specifically, the proposed method exhibits an improved percentage of 55.4 %, 56.3 %, and 59.7 % for positioning accuracy compared to those without the quality control method in the E, N, and U directions, respectively. Besides, the proposed method can further improve the performance of ambiguity resolution with an improved percentage of 32.2 %. For the kinematic experiment, the three-dimensional positioning accuracy of the proposed method is 0.577 m, which exhibits a 40.0 % improvement compared to those without the quality control method. Also, the proposed method exhibits better performance under relatively strong multipath effects. In this sense, the proposed real-time combined quality control method is highly appreciated in terms of positioning availability, accuracy, and ambiguity resolution for GNSS precise positioning, especially in harsh environments.     

舰载机-航母间径向距离的多普勒测量

通过对多普勒频移方程进行角度变换,并利用在下滑视角和坐标变量之间的对应关系导出了在三个站点的径向距离之间的递推关系.在此基础上,进一步利用固有的几何关系,即能由任一瞬间所测得的多普勒频移值,得到舰载机-航之间径向距离的解析解.随后进行的误差分析表明基于多普勒频移测距可以实现分米级的测量精度.     

卫星大部件二维转台装配工艺方法

为了满足某卫星大部件二维转台在地面重力状态装配后，保证其在轨解锁前精度一致性，提出了二维转台装配工艺优化方法。首先通过模拟载荷配重试验，探索转台星上接口重力下变化规律，保证结构板组合加工偏差，优化卫星层板组合加工工艺方法;其次分析二维转台机构变形，采用卸载装星工装，并对二维转台卸载装配前后关键变形进行精测对比。二维转台通过模拟试验和卸载装配后，保证了地面重力压紧状态和卸载状态下装配精度均在设计指标内，满足卫星二维转台装配要求。通过模拟试验确定结构加工公差余量，在进行卸载装配时，对卸载前后精度精测对比，是卫星大部件载荷装配工艺的正确方法。     

A Robotic TeleoperationSystem for Precise Robotic Manipulation by Human-Machine Interaction

Teleoperation is of great importance in the area of robotics， especially when people are unavailable in the robot workshop. It provides a way for people to control robots remotely using human intelligence. In this paper， a robotic teleoperation system for precise robotic manipulation is established. The data glove and the 7-degrees of freedom (DOFs) force feedback controller are used for the remote control interaction. The control system and the monitor system are designed for the remote precise manipulation. The monitor system contains an image acquisition system and a human-machine interaction module， and aims to simulate and detect the robot running state. Besides，a visual object tracking algorithm is developed to estimate the states of the dynamic system from noisy observations. The established robotic teleoperation systemis applied to a series of experiments， and high-precision results are obtained， showing the effectiveness of the physical system.     

基于B1c/B2a/B3I北斗三频实时 高采样率动态PPP分析

为了分析北斗三号新信号的三频实时动态PPP定位性能，首先推导了三频两两组合无电离层模型和三频非差非组合模型的观测方程。基于山东建筑大学CORS站观测得到的北斗三号B1c/B2a/B3I三频信号1s采样率数据，使用iGMAS提供的超快速精密星历预报部分，制定了基于B1cB3I-B2aB3I三频无电离层两两组合、B1cB2aB3I三频非差非组合以及用于对比分析的B1cB2a、B1IB3I两种双频无电离层共四种定位方案。然后利用Net_Diff软件进行实时动态PPP实验，对超快速精密轨道和钟差预报部分的精度和稳定度以及实验解算结果进行分析，对比不同定位方案的定位性能。实验分析表明，两种三频定位方案定位性能均优于B1cB2a双频定位方案，定位精度能达到0.462m和0.479m，收敛至分米所需时间能达到45.8min和62.8min；B1IB3I方案定位性能优于两种三频定位方案，定位精度和收敛速度能达到0.228m和6.6min。