CFRP管件的弯曲蠕变行为试验研究

为评价航天器结构中碳纤维增强树脂基(CFRP)复合材料管件的使用可靠性,开展了三点弯曲加载条件下CFRP管件弯曲性能和蠕变行为试验研究。进行了管件弯曲模量和弯曲强度测试、500 h时长的恒温蠕变测试以及–60℃~100℃和–160℃~80℃两种高低温循环蠕变测试,获得了典型温度工况、不同应力水平作用下管件弯曲蠕变变形规律。根据测试结果,确定了基于时间–温度–应力等效原理的管件蠕变主曲线以及唯象蠕变Findley模型,预测分析了管件长期蠕变变形;采用最大应变强度准则,对该CFRP管件的强度特性和安全承载能力进行了评价。结果表明,该CFRP管件在设计服役期限内能够满足蠕变变形与强度要求。     

Re对Ni3Al屈服强度及断裂强度影响的第一原理研究

为了满足航空发动机热端部件材料力学性能的不断提高,应用基于密度泛函理论的第一原理方法,研究了Re对Ni_3Al金属间化合物力学强度的影响。通过建立掺杂Re前后Ni_3Al的滑移模型和断裂模型,计算了晶胞的不稳定堆垛层错能γ_(US)和断裂能γ_C,进而判断Re对Ni_3Al屈服强度和断裂强度的影响。另外根据经验判据,γ_C/γ_(US)值可表征材料的韧脆性。计算结果表明,Re的掺杂增大了Ni_3Al [11■](111)和[1■0](111)两个滑移系下的γ_(US),使得滑移系不易开动,不易使Ni_3Al发生塑性变形,增大了Ni_3Al的屈服强度。Re增大了Ni_3Al在密排面处的断裂能,使得其不易在密排面发生断裂,增大了断裂强度。关于改善Ni_3Al的韧性,Re的掺杂对于密排面上不同滑移方向的影响具有一定的差别。此研究工作可为改善航空发动机单晶叶片的力学性能提供理论基础。     

水下巡检蛇形机器人移动单元结构设计及计算

随着经济蓬勃发展,水生农作物市场的需求量不断增长,水域水质检测行业显得日益重要,但人工水质水域检测效率低下,为此设计一套可以搭载检测传感器的水质检测蛇形机器人,以提高检测效率、降低检测成本、减轻人工劳动力度.为适应水下环境,该机器人具备小巧、灵活、机动性能好、转弯灵活、对复杂水域适应能力强、可检测不同深度水质的特点,在...     

基于MSC/PATRAN的飞机结构强度静力试验数据实时跟踪与处理系统开发

 在Windows环境下,以MSC/PATRAN为平台,利用平台提供的二次开发语言PCL(Patran Command Language),并结合C++语言,通过客户化、增设特定的命令和窗体等技术开发了飞机结构强度静力试验数据实时跟踪与处理系统TestDTAS（Test Data Tracking, Analyzing and Processing System）。在结构试验进行中,TestDTAS可以实时地监测结构试验件中应力和位移的变化情况,并与理论分析结果进行对比,而在试验结束后,TestDTAS可以进行试验数据回放和分析,从而将试验与理论分析有机的结合在一起,对结构静力试验和结构设计有很高的实用价值。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

基于行波与模态的混合方法对Timoshenko梁进行振动主动控制

 基于Timoshenko梁理论,采用波控制和独立模态空间混合方法,对悬臂梁的振动控制问题进行研究。采用波控制方法实现对Timoshenko梁结构的一点或多点的横向位移的振动控制。首先,基于结构的整体运动,采用模态坐标控制方法,对结构振动进行整体控制设计。而后,基于结构的局部性质,采用波方法吸收结构振动中的高频能量并求出Timoshenko梁中波的反射因数和透射因数。理论上研究了单位力扰动下的悬臂梁的振动。考虑的具体方法是将PD反馈波控制与基于极点配置法设计的模态控制相结合。最后给出数值结果。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

流动参数对发动机冷却用引射器性能的影响

为了探索引射器在航空发动机空气系统中的应用可行性,采用标准k-ω模型并求解雷诺平均Navier-Stokes方程组的数值方法,分析了流动参数对发动机冷却用引射器引射系数、压力损失系数及引射性能综合参数的影响.结果表明:膨胀比由9增大至10.1,引射系数增大了 66％;膨胀比由15.2增大至20.2,引射系数降低了 19...     

某型飞机前起落架收放作动筒耳环螺栓断裂故障分析

从断口理化分析、故障件检查、静强度、压杆失稳、出现裂纹后的剩余强度以及特殊受载情况等方面对耳环螺栓断裂故障进行了综合分析,找出了耳环螺栓断裂的原因。