雷达吸波材料的研究现状和发展方向

分析了雷达吸波材料在隐身技术中的重要地位，较详细地介绍了铁氧体吸波材料、金属微粉吸波材料、纳米吸波材料和多晶铁纤维吸波材料的研究和应用现状。最后指出，多频谱隐身材料和智能型隐身材料是雷达吸波材料中两个最主要的发展方向。     

二维炭/炭复合材料中纤维-树脂体系的研究

对三种炭纤维和三种酚醛树脂进行了六各二维层合炭／炭复合材料研制，测试了层同剪切强度和拉伸强度，ＴＣＦ／ＦＥ体系，ＲＣＦ／ＲＰＨ体系所制备的二维Ｃ／Ｃ具有较高的层间剪切强度和拉伸强度，层间强度在１６ＭＰＡ以上，结果表明，二维炭／炭中纤维－树脂体系存在一个最佳配合问题；纤维不约而同的官能团比表面度在界面连接上起重要的作用，树脂的选择还要结合其结构表进行。     

含压电片层合板的振动控制

本文借助阶梯函数 ,建立了含有任意分布的用作执行器的压电片的层合板振动方程。在此基础上 ,利用模态法 ,进行了板的振动控制研究。仿真结果表明 ,无论对自由振动还是受迫振动 ,控制效果都十分明显。     

碳/环氧复合材料层板基体裂纹的检测与分析

本工作从实验和计算两方面测算碳/环氧复合村料在拉伸载荷下,[0/90]s、[±45]_(s),]11=11]碳布三种层板基体裂纹发生的形式和应变水平,以期能预测不同裂纹产生的载荷门槛值。结果表明:采用声发射技术跟踪配合显微观测碳/环氧层板初始损伤(基体裂纹、脱层等)的应力水平,并采用能量判据有限无计算裂纹扩展的临界应变能释放率,计算和实验结果比较,符合较好。     

GMR硬盘磁头抛光的超声波作用机理

在硬盘磁头抛光中加入超声波,可以提高材料去除率、降低表面粗糙度值、减小极尖沉降。     

在25℃和-40℃环境下的三种航空材料的裂纹扩展品质研究

 为了探讨室温和低温环境下的航空金属材料的裂纹扩展特性,进行了-40℃和25℃两种温度环境下的LY12CZ,LC4CS和30CrMnSiNi2A 3种材料的a-N和da/dN△K曲线的对比试验研究。从试验结果比较得出,这3种材料在-40℃的a-N曲线和da/dN△K曲线全部高于25℃下的a-N曲线和da/dN△K曲线,说明这3种材料在-40℃环境下的裂纹扩展速率要比在25℃（常温）下的裂纹扩展速率要低,即同样材料在同一载荷谱作用下,低温环境下的裂纹扩展寿命要高于常温环境下的裂纹扩展寿命。     

薄壁件周铣过程中材料去除效应的快速仿真

 针对薄壁件铣削过程加工误差预测,建立了一种快速有效的材料去除仿真模型,即利用工件的原始有限元网格模型,直接使用径向切削量的名义值进行材料去除效应模拟,将被切除网格单元的单元刚度按被切除体积与该单元初始体积的百分率等效修正。该模型既无需进行工件网格重划,又可以很好地保证仿真精度,极大地简化了处理流程,提高了计算效率。应用实例的计算结果和试验结果比较,表明了该模型的有效性和实用性。     

Optimization Design System for Composite Structures Based on Grid Technology

To solve the topology optimization of complicated multi-objective continuous/discrete design variables in aircmit structure design, a Parallel Pareto Genetic Algorithm （PPGA） is presented based on grid platform in this paper. In the algorithm, the commercial finite element analysis （FEA） software is integrated as the calculating tool for analyzing the objective functions and the filter of Pareto solution set based on weight information is introduced to deal with the relationships among all objectives. Grid technology is utilized in PPGA to realize the distributed computations and the user interface is developed to realize the job submission and job management locally/remotely. Taking the aero-elastic tailoring of a composite wing for optimization as an example, a set of Pareto solutions are obtained for the decision-maker. The numerical results show that the aileron reversal problem can be solved by adding the limited skin weight in this system. The algorithm can be used to solve complicated topology optimization for composite structures in engineering and the computation efficiency can be improved greatly by using the grid platform that aggregates numerous idle resources.     

FEM Analysis of Spring-backs in Age Forming of Aluminum Alloy Plates

The age forming technology, characterized by huge spring-backs, has been developed to manufacture large integral wing-skin panel parts, which necessitates devising a method of predicting spring-backs. A 7B04-T7451 aluminum alloy creep test in tension is accomplished at 155 ℃, and the creep curves are obtained. The material constants of the mechanism-based creep constitutive equations are determined through experiments. The age forming process and the spring-backs of 7B04 aluminum alloy plates are analyzed using the commercial finite element software ABAQUS. The effects of plate thickness and forming time on spring-backs are researched. The spring-backs decrease with the increase of plate thickness and forming time. The test results verify the reliability of the finite element method （FEM） analysis.     

介质加载谐振腔滤波器的频率温度系数设计

通过采用移动通信基站双工器频率温度系数(FTC)的测量方法和得到的实验数据,来设计介质加载谐振腔滤波器,包括介质材料的选择和微调机构的设计。实验表明,用该方法设计的介质滤波器的频率温度系数能满足下一代移动通信、ITFS、MMDS和其它带宽相对极窄应用场合的要求。