噪声调制连续波雷达信号波形射频隐身特性

雷达信号波形的射频(RF)隐身性能是雷达系统能否适应现代战场环境的重要因素,雷达射频隐身信号波形设计是现代雷达系统设计中的重要课题.首先,在介绍随机噪声信号雷达原理的基础上,基于Schleher截获因子阐述了噪声调制连续波雷达信号波形的射频隐身特性.然后,分析了高斯噪声相位和频率调制连续波雷达输出自相关函数和高斯噪声相...     

Research of Compound Controller for Flight Simulator with Disturbance Observer

A compound controller is proposed to alleviate the considerable chattering in output of zero phase error tracking controller (ZPETC), when the flight simulator losses command data of simulation signal. Besides, the shortcomings, caused by conventional differential methods in retrieving velocity and acceleration signals, are avoided to a certain extent. The compound controller based on disturbance observer (DOB) is composed of a feed-forward controller and a feedback controller. It estimates velocity and acceleration of unknown tracking signal, and also velocity response with an approximate method for differential. The experiments on a single-axis flight simulator show that the proposed method has strong robustness against parameter perturbations and external disturbances, owing to the introduced DOB. Compared with the scheme with ZPETC, the proposed scheme possesses more simple design and better tracking performance. Moreover, it is less sensitive to position command distortion of flight simulator.     

遄达发动机及其第五阶段燃烧室

罗·罗公司的第五阶段燃烧室是一种先进的航空发动机燃烧室,代表了该公司燃烧室工程技术发展的成就.本文对第五阶段燃烧室原理作一概括性介绍,并就该燃烧室与遄达系列发动机之间的关系进行分析.供相关人士参考.     

发动机防冰支板水滴撞击特性的数值研究

在对发动机防冰支板附近的流场进行计算的基础上,使用离散相模型在拉氏坐标下模拟了该流场中过冷水滴的运动轨迹,对发动机防冰支板的水滴撞击特性进行了研究.研究表明,水滴撞击极限、总收集系数和局部收集系数随飞行高度、来流速度及水滴直径的增加而增大.     

基于UKF算法的单站无源定位

机载单站无源定位具有机动性好、作用范围广等特点,而基于相位差变化率的定位方法又具有定位速度快、精度高等优点.文章研究了Unscenteed Kalman Filter(UKF)在机载单站无源定位中的应用,给出了相位差变化率定位方法的原理,介绍了UKF算法的滤波原理及滤波过程.从仿真结果表明,UKF算法应用在机载单站无源...     

High-entropy (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2(Zr0.75Ce0.25)2O7 thermal barrier coating material with significantly enhanced fracture toughness

Poor fracture toughness leads to premature failure of La₂(Zr_0.75Ce_0.25)₂O₇ (LCZ) thermal barrier coatings in an elevated temperature service environment. A novel coating material, namely (La_0.2Nd_0.2Sm_0.2Gd_0.2Yb_0.2)₂(Zr_0.75Ce_0.25)₂O₇ (LNSGY) based on the high-entropy concept, was successfully fabricated by solid-state sintering. The microstructure of LCZ and LNSGY was investigated by X-Ray Diffraction (XRD), Raman Spectrometer (RS), Transmission Electronic Microscopy (TEM) and Scanning Electron Microscopy (SEM). The fracture toughness of the LCZ and LNSGY ceramics was evaluated. The LNSGY has excellent high-temperature phase stability, and the grain size of LNSGY ceramic is smaller than that of LCZ ceramic at an elevated temperature due to the sluggish diffusion effect. Compared with LCZ (fracture toughness is (1.4 ± 0.1) MPa∙m^1/2), the fracture toughness of LNSGY is significantly enhanced (fracture toughness is (2.0 ± 0.3) MPa∙m^1/2). Therefore, the LNSGY can be a promising advanced thermal barrier coating material in the future.     

Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition

 Laser melting deposition was carried out to deposit a 1Cr12Ni2WMoVNb steel bar on a wrought bar of same material. Room-temperature tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample were evaluated, and microstructure, fracture surface morphology, and hardness profile were analyzed by an optical microscope (OM), a scanning electron microscope (SEM), and a hardness tester. Results show that the hybrid fabricated 1Cr12Ni2WMoVNb steel sample consists of laser deposited zone, wrought substrate zone, and heat affected zone (HAZ) of the wrought substrate. The laser deposited zone has coarse columnar prior austenite grains and fine well-aligned dendritic structure, while the HAZ of the wrought substrate has equiaxed prior austenite grains which are notably finer than those in the wrought substrate zone. Besides, austenitic transformation mechanism of the HAZ of the wrought substrate is different from that of the laser deposited zone during the reheating period of the laser deposition, which determines the different prior austenite grain morphologies of the two zones. Microhardness values of both the laser deposited zone and the HAZ of the wrought substrate are higher than that of the wrought substrate zone. Tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample are comparable to those of the wrought bar, and fracture occurs in the wrought substrate zone during the tensile test.     

大型薄壁铸件铆接裂纹原因分析

某飞机上的一大型薄壁铸件在与蒙皮铆接时多次发生开裂,造成严重的安全隐患.通过对故障件进行的断口宏、微观检查,金相组织分析以及相关工艺试验,经综合分析讨论,明确了铸件铆接时出现裂纹的原因.结果表明:该零件铸造时变质处理不充分,材质塑性差,降低铆接时承受冲击的能力是导致开裂的主要原因,零件装配存在应力也是导致开裂的重要因素.     

飞机电动机过热研究

首先从飞机防火角度，用对称分量法分析了航空电机在不对称电源下的发热情况，推导了发热电流的公式，以此作为数学模型，解释缺相时电机很快烧毁的物理现象。最后提出了防止航空三相电动机过热与起火的方法，包括采用电机在线状态监控、主动维护、增加有效的保护装置等。     

应用激光相位-多普勒系统测量雾化液滴颗粒和流动特性

在几何光学近似理论的基础上分析了相位多普勒方法的理论模型和相位 粒径特性关系 ,分析了实验应用的光纤型激光相位多普勒系统的原理和组成 ,并应用此系统对雾化喷嘴的流动和颗粒特性进行了测量 ,得到了液滴的二维速度与粒径的相关和统计特性。