发挥员工最大潜能 迎接21世纪优质服务的挑战(英文)

每一个机构中，员工的潜能往往被经理们所低估。如何达到公司经营的最高目标及有效地面对剧烈竞争的工商业世界，我们一定要帮助员工在机构内发挥他们最大的潜能，最后使员工及顾客均满意。怎样了解及发挥员工的内在潜能是２１世纪最有效的员工管理策略，要使员工及顾客都满意，一定要知道怎样去激发员工最大潜能，并不断学习新的文化及有效地奖励员工。     

先进战斗机强度设计技术发展与实践

新一代先进战斗机对机体平台的要求可以总结为轻重量、长寿命、多功能以及高承载。实现这个目标，除了材料与制造（新材料、新工艺、新结构/装配）的贡献，主机所强度设计/分析/验证技术也必须提升以适应先进战斗机的研制要求。本文阐述了强度设计团队围绕结构完整性要求，近年来在结构强度设计/分析/验证方面的研究成果、技术发展与设计实践，主要包括：面向新一代战斗机强度设计与验证的规范架构，基于多维包线的结构载荷筛选技术，基于统一模型的全机内力分析技术，复合材料整体化结构分析技术，高精度快速细节应力分析技术，内埋武器舱预紧舱门原理与强度设计，双曲面加筋壁板快速建模及声疲劳分析方法，结构故障预测与健康管理系统设计等。上述研究成果已成功应用于新一代战斗机机体平台研制。     

数控加工零件热场分布的虚拟仿真

利用有限差分法对金属零件在数控机械加工过程产生热量的分布进行了数值分析,为计算金属零件热应力变形提供基础,是虚拟制造中机械加工工艺过程规划虚拟仿真的一种新方法。     

Mercury’s Surface Composition and Character as Measured by Ground-Based Observations

Mercury’s surface is thought to be covered with highly space-weathered silicate material. The regolith is composed of material accumulated during the time of planetary formation, and subsequently from comets, meteorites, and the Sun. Ground-based observations indicate a heterogeneous surface composition with SiO₂ content ranging from 39 to 57 wt%. Visible and near-infrared spectra, multi-spectral imaging, and modeling indicate expanses of feldspathic, well-comminuted surface with some smooth regions that are likely to be magmatic in origin with many widely distributed crystalline impact ejecta rays and blocky deposits. Pyroxene spectral signatures have been recorded at four locations. Although highly space weathered, there is little evidence for the conversion of FeO to nanophase metallic iron particles (npFe⁰), or “iron blebs,” as at the Moon. Near- and mid-infrared spectroscopy indicate clino- and ortho-pyroxene are present at different locations. There is some evidence for no- or low-iron alkali basalts and feldspathoids. All evidence, including microwave studies, point to a low iron and low titanium surface. There may be a link between the surface and the exosphere that may be diagnostic of the true crustal composition of Mercury. A structural global dichotomy exists with a huge basin on the side not imaged by Mariner 10. This paper briefly describes the implications for this dichotomy on the magnetic field and the 3 : 2 spin : orbit coupling. All other points made above are detailed here with an account of the observations, the analysis of the observations, and theoretical modeling, where appropriate, that supports the stated conclusions.     

高超侧压式进气道参数分析及试验研究

分析了高超侧压式进气过第一、二溢流窗的溢流角随后掠角的变化规律，分析了溢流窗气流与主流相互作用而形成一道脱体曲面激波的原因，设计了侧压角为６°，后掠角３０°的直前缘及圆弧前缘两套高超侧压式进气道，在Ｍ５．３风洞中利用风洞壁面自然发展的附面层进行非均匀来流下进气道起动性能及总体性能试验，试验发现大量附面层吸入不仅对起动性能有重大影响，而且对总压恢复影响也极大。     

河南省能源产业与经济可持续发展的实证研究

基于中原经济区可持续发展战略的基础,选择河南省1978～2015年相关数据作为分析样本,利用VAR模型对河南省能源产业与经济可持续发展之间的相互关系进行回归分析。结果表明:河南省持续快速的经济增长并不是造成能源产业发展失衡的原因,但失衡的能源供求状况却对河南省经济可持续发展带来了相当程度的不利影响。鉴于此,河南省能源产业发展要尊崇"节能优先、保障供需、优化结构、市场推动、保护环境、持续发展"的基本战略要求,一方面着力优化能源布局和能源结构,提高能源开发利用效率,构建经济、清洁、安全、稳定的现代能源产业体系,建设全国重要的综合能源基地,另一方面大力发展清洁能源和可再生能源,构建中原经济区低碳节能发展的理念,实现资源的有效开发与利用,促进整个社会经济可持续发展。     

轴向非均匀凹槽叶顶的实验与数值研究

为探究不同轴向非均匀凹槽间隙控制泄漏流动的效果和机理,采用实验与数值结合的研究方法,对两种间隙条件下的叶顶凹槽结合渐缩型间隙、均匀型间隙和渐扩型间隙方案对涡轮叶顶泄漏流动的控制效果进行研究。结果表明:减小泄漏流流量与控制叶栅总压损失之间没有直接联系,渐扩型间隙增大了26.7%的泄漏流流量,但在小间隙和大间隙条件下分别减小了2.44%和3.53%的总压损失;渐扩间隙减小总压损失,是通过有效减小通道涡在节距向和展向的尺度,并在一定程度上减小泄漏涡在节距向的尺度实现的;渐扩间隙减小通道涡和泄漏涡的尺度,其原理在于渐扩间隙的布置增强了凹槽内的径向流动,使压力面再附线更靠近叶片,吸力面泄漏涡分离线位置更靠后,从而抑制了泄漏流动。      

Aircraft engine fault detection based on grouped convolutional denoising autoencoders

Many existing aircraft engine fault detection methods are highly dependent on performance deviation data that are provided by the original equipment manufacturer. To improve the independent engine fault detection ability, Aircraft Communications Addressing and Reporting System (ACARS) data can be used. However, owing to the characteristics of high dimension, complex correlations between parameters, and large noise content, it is difficult for existing methods to detect faults effectively by using ACARS data. To solve this problem, a novel engine fault detection method based on original ACARS data is proposed. First, inspired by computer vision methods, all variables were divided into separated groups according to their correlations. Then, an improved convolutional denoising autoencoder was used to extract the features of each group. Finally, all of the extracted features were fused to form feature vectors. Thereby, fault samples could be identified based on these feature vectors. Experiments were conducted to validate the effectiveness and efficiency of our method and other competing methods by considering real ACARS data as the data source. The results reveal the good performance of our method with regard to comprehensive fault detection and robustness. Additionally, the computational and time costs of our method are shown to be relatively low.     

归一化参数蠕变模型的程序实现与验证

为了准确模拟实际构件的蠕变行为和应力松弛效应,在通用有限元程序环境下,利用其提供的用户可编程特性工具,将所发展的一种能完整描述蠕变3个阶段变形特征的归一化参数模型编制成用户子程序.考查了子程序计算结果与试验数据的差异、时间步长对计算结果的影响,并对不同规模有限元模型的计算耗时作了对比分析.针对变载(应力、温度)情形,在子程序中实现了时间硬化理论和应变硬化理论,并提出的介于两者之间的相对时间硬化理论.对带孔平板进行了实例计算,表明所发展的模型能够与有限元结果对实际结构进行蠕变模拟,计算结果的规律说明所发展的方法可较好地模拟实际构件的蠕变行为和应力松弛效应,验证了子程序的有效性.