A trajectory planning method on error compensation of residual height for aero-engine blades of robotic belt grinding

While the traditional trajectory planning methods are used in robotic belt grinding of blades with an uneven machining allowance distribution, it is hard to obtain the preferable profile accuracy and surface quality to meet the high-performance requirements of aero-engine. To solve this problem, a novel trajectory planning method is proposed in this paper by considering the developed interpolation algorithm and the machining allowance threshold. The residual height error obtained from grinding e...     

Exploring the potential of Sentinel-3 delay Doppler altimetry for enhanced detection of coastal currents along the Northwest Atlantic shelf

In this study, we evaluate Sentinel-3A satellite synthetic aperture radar (SAR) altimeter observations along the Northwest Atlantic coast, spanning the Nova Scotian Shelf, Gulf of Maine, and Mid-Atlantic Bight. Comparisons are made of altimeter sea surface height (SSH) measurements from three different altimeter data processing approaches: fully-focused synthetic aperture radar (FFSAR), un-focused SAR (UFSAR), and conventional low-resolution mode (LRM). Results show that fully-focused SAR data always outperform LRM data and are comparable or slightly better than the nominal un-focused SAR product. SSH measurement noise in both SAR-mode datasets is significantly reduced compared to LRM. FFSAR SSH 20-Hz noise levels, derived from 80-Hz FFSAR data, are lower than 20-Hz UFSAR SSH with 25% noise reduction offshore of 5 km, and 55–70% within 5 km of the coast. The offshore noise improvement is most likely due to the higher native along-track data posting rate (80 Hz for FFSAR, and 20 Hz for UFSAR), while the large coastal improvement indicates an apparent FFSAR data processing advantage approaching the coastlines. FFSAR-derived geostrophic ocean current estimates exhibit the lowest bias and noise when compared to in situ buoy-measured currents. Assessment at short spatial scales of 5–20 km reveals that Sentinel-3A SAR data provide sharper and more realistic measurement of small-scale sea surface slopes associated with expected nearshore coastal currents and small-scale gyre features that are much less well resolved in conventional altimetric LRM data.     

天基海表精细探测微波载荷性能分析与展望

海表精细探测是海洋卫星未来发展的重要方向。介绍卫星海表参数探测的特点与优势，总结海表温度、海表高度、海表盐度等要素，分析天基探测载荷的发展现状。根据海表参数时空变化特性，分析高时空分辨率微波探测载荷性能需求。在此基础上，针对美国和欧洲相关卫星系统发展计划，分析了高时空分辨率、高精度天基微波探测载荷可实现性与未来发展趋势，针对海表精细探测天基微波载荷的发展提出了建议。     

An improved altimeter-derived gravity anomaly from shipborne gravity based on the mean sea surface height constraint factors method

Coastal marine gravity modeling faces challenges due to the degradation of the quality and poor coverage of altimeter data in coastal regions. The effective fusion of shipborne gravity data and altimeter-derived marine gravity data can make shipborne gravity data more useful for the accurate estimation of altimeter-derived coastal marine gravity. A mean sea surface height constraint factor (MSSHCF) method based on the ordinary kriging method and the remove-restore technique is proposed to fuse altimeter-derived gravity model with shipborne gravity data. In this method, all data are standardized during the interpolation process to reduce the error and mean sea surface as a vertical variable is added to the semi-variance function in ordinary kriging to obtain the residual shipborne gravity as corrected data source. The coastal marine gravity models V2.1 and V3.1 which fused altimeter-derived gravity data with shipborne gravity data and V1.1 without shipborne gravity data at a spatial resolution of 1′×1′ can be obtained. Validation experiments show that the accuracy of the gravity model V3.1 obtained by the MSSHCF method more closely agrees with the validated gravity model DTU17 and SS V31 than the model V2.1 obtained by the ordinary kriging interpolation method and the V1.1 model. Our results were validated against shipborne gravity data; the accuracy of model V3.1 was 4.95 % higher than the model V1.1 in South China Sea area A and 2.48 % higher in South China Sea area B. Meanwhile, the accuracy of model V3.1 was 2.07 % higher than model V2.1 in South China Sea area A and 2.42 % higher in South China Sea area B. The effects of distance from the coast and sea depth on the marine gravity model were also evaluated. The results show that the gravity model V3.1 has higher accuracy with the change in ocean distance and depth than the V2.1 and V1.1 gravity models. Thus, our study shows that the MSSHCF method effectively refines coastal altimeter-derived gravity using shipborne gravity data.     

A new approach for pulse amplitude measurement using Lagrange’s interpolation for radiation or particle detectors

In radiation detector signal processing, usually, the charge-sensitive preamplifier converts the small charge signal coming from the semiconductor-based detector into voltage form and then the signal is further amplified to measure the energy of the incoming radiation. The voltage pulse from a charge-sensitive preamplifier (CSPA) is amplified using a shaping amplifier which reduces the signal bandwidth. To achieve better energy resolution, precise measurement of the peak amplitude of shaping amplifier output is required. The signal processing methods are available in which the signal from the charge-sensitive preamplifier can be directly digitized using high-speed Analog to Digital Converters (ADC), and then further signal processing such as gain and shaping is carried out inside the Field Programmable Gate Arrays (FPGA). For multiple detector systems, digital signal processing methods are quite difficult to implement in Field Programmable Gate Arrays (FPGA). In this context, The development of an alternative technique is initiated that uses a charge-sensitive preamplifier, shaping amplifier, low sampling analog-to-digital converter, and FPGA, where LaGrange’s interpolation technique is implemented in FPGA to precisely measure the peak of the analog pulse. In this paper, the comparison of the proposed method with other pulse amplitude measurement techniques is discussed. Results show that the implemented technique gives similar energy resolution compared to digital pulse processing and standard peak detector-based techniques.