研究用现场数据估计系统可靠性参数置信区间

研究用元部件现场信息估计系统可靠性参数,如系统可靠度、可靠寿命等区间估计问题。文中提出了一种新的估计方法——替换百分点法,并运用Monte Carlo数字仿真对估计的置信度和精度进行了分析,研究结果表明此方法具有工程应用价值。     

喷流噪声特性与控制研究

本文着重研究喷流噪声机理及工程计算方法。通过实验研究了声功率与喷流速度的关系,表明在Mα>0.4时Lighthill方程和Lilley方程均与实验数据吻合,可分别使用。而Mα<0.4时,均偏差较大,通过本文实验表明,若改为6次方关系较为恰当。文章同时对喷流噪声指向性、谱特性进行了分析。最后对一种引射消声器进行了发展性研究,获得在135dB噪声条件下,降噪17dB的效果。     

利用双目标优化寻求颤振抑制控制律

本文对一个三角机翼/外挂系统的颤振主动抑制进行了系统的研究。在理论上,对如何应用现代控制理论设计优化控制律进行了探讨;对非定常气动力拟合的Pade矩阵近似作了改进;提出了用理想极点和二次型性能指标进行双目标优化来确定加权矩阵的思想;在实现上,用状态观测器和单秩法极点配置两种方法设计了输出反馈控制律。风洞实验结果表明:用本文的方法所综合的控制律是合适有效的,成功地使机翼/外挂系统的颤振速度提高了15.7％,与理论计算结果吻合良好。     

复杂测量系统中时间的系统误差测量方法

长距离的复杂测量系统中,由于传输通道不同,引入的传输延迟时间变化不同,导致原有时间关系的误差引入。介绍了几种可行的系统误差测量方法,以消除系统误差对信号间时间关系的影响,同时达到检验测试系统安排是否存在问题的目的。     

MATLAB在飞机环境控制系统仿真中的应用

介绍了在MATLAB环境下,对飞机环境控制系统的建模方法,开发了飞机环控系统综合仿真的MATLAB工具箱.简单介绍了所开发的仿真工具箱,并且用此工具箱对某型飞机的环控系统进行了仿真研究,与实验结果的对比表明,所开发的工具箱,具有很高的仿真精度.     

无刷直流电动机的新型自适应模糊神经控制

 为无刷直流电动机提出了一种自适应模糊神经控制方法.这是一种建立在开关控制、模糊控制和自适应控制相结合基础上的控制方法,并用神经网络实现了模糊控制器和自适应机构.在无刷直流电动机的双闭环调速系统中,电流控制器是PI控制器;转速控制器是由1个开关控制器和1个包括自适应机构在内的模糊控制器相结合组成的,且用1个3层前向神经网络离线学习实现了模糊控制器,学习算法采用的是改进的BP算法.用1个单神经元通过在系统运行过程中的动态学习实现了自适应机构,学习算法选用了有监督的Hebb学习算法.由电机所处的运行阶段决定哪一个控制器工作.此控制算法的仿真结果说明,它使系统具有良好的动、静态特性和自适应性.     

遥控机器人在空间抓物实验的仿真研究

本文是对空间机器人由地面站遥控操纵在空间抓物实验方案的仿真研究,它是在图形计算机工作站上用C语言编程实现的。视景化仿真描绘了自由飞行物与机器人之间的相对运动,考虑了空间站与地面站信息传输延迟的影响,用扩展的卡尔曼滤波实现了机器人对自由飞行物的自动跟踪,人在地面站观测预报的机器人和目标物的立体图象,可以经操纵球控制机械手运动。仿真结果表明,该方案对进一步研究有很好的参考价值。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.     

三角翼DBD等离子体流动控制研究进展

现代战机采用较多的三角翼，在大迎角绕流时存在前缘涡破裂等气动问题。作为新型主动流动控制技术，等离子体激励频带宽、响应快、结构简单、便于闭环控制，在解决三角翼气动问题上具有潜力。回顾了介质阻挡放电（DBD）等离子体气动激励的基本原理，及其用于三角翼前缘涡控制的研究进展。从来流条件、几何构型、激励参数等方面分析了DBD等离子体激励对流动控制效果的影响规律；结合不同激励频率下流场演化特性，分析了流动控制机理。最后，从理论研究和工程应用的角度，对三角翼前缘涡控制的发展进行总结展望。