基于G-M制冷机的大尺寸冷屏设计方法

介绍了基于Gifford-Mcmahon (G-M)制冷机的大尺寸冷屏的设计方法。该低温冷屏配合真空环境模拟室共同使用,为遥感卫星的星载遥感器等部件的红外定标试验提供20K的低温冷背景。该冷屏采用5台G-M制冷机进行制冷,外形尺寸达到1m×1m,是目前国内同类型冷屏中尺寸最大的。详细介绍了冷屏在容器内的安装布置、冷缩时的补偿等结构设计方法、冷屏的表面温度分布以及降温时间等计算分析。成功解决了大尺寸冷屏在低温环境下的冷缩补偿难题,试验结果表明:冷屏主要测点温度为15K,温度均匀性误差为±1K,达到并超过设计要求。      

带止口法兰连接结构刚度特性对结构振动影响

对带有止口的法兰连接结构刚度特性进行了数值仿真研究。使用有限元软件ANSYS分析了带有止口的法兰连接结构的迟滞特性。通过对止口接触面的变形-滑移机理分析,使用一个詹金斯单元和一个弹簧单元并联模拟法兰的一个扇区,并基于法兰弯曲变形时每个扇区的不同状态建立了整个法兰结构的弯曲刚度简化模型,并对该简化模型进行了仿真,该简化模型能够较准确地模拟带止口法兰连接结构的刚度特性。基于简化模型和梁单元建立了简化转子结构模型,分析了带有止口的法兰连接结构对转子稳态动力学响应的影响。结果表明带有止口的法兰连接结构的迟滞特性能够影响峰值频率,随着止口过盈量的增加,响应峰值显著降低,具有较好的振动抑制效果。      

一种基于Deep-GBM的航空发动机中介轴承故障诊断方法

针对航空发动机中介轴承故障信号难于识别的特点,提出了一种深度梯度提升模型（Deep-GBM）对振动信号特征进行逐层学习以提高分类模型的准确率。开展某型航空发动机中介轴承故障模拟实验,并采用经验模式分解(EMD)方法对采集的振动信号进行分解,提取内蕴模式函数(IMF)分量非线性动力学参数样本熵作为原始故障特征。采用Deep-GBM对中介轴承内环故障、内环和滚动体综合故障、正常、滚棒剥落、滚棒划伤五种不同状态进行识别。实验结果表明,所提出的Deep-GBM故障诊断准确率达到87%,相对于传统的机器学习模型准确率最高提升了28%,并具有良好的泛化能力。      

组合临界流文丘里喷嘴空气流量测量方法高空舱应用分析

为满足发动机高空试验低流速进气条件下空气流量精确测量,减小进气导管气流附面层影响,弱化空气流量测量与被试发动机相关性。分析了单件/组合临界流文丘里喷嘴的工作特性,给出了组合临界流文丘里喷嘴(ACFVN)空气流量计算方法,依据给定试验发动机和高空舱尺寸设计了临界流文丘里喷嘴组合结构,得到了组合临界流文丘里喷嘴在高空舱应用的控制方法和测试布局。采用小尺寸喷嘴对组合喷嘴设计和应用方法进行了验证,结果表明:采用打开/关闭喷嘴数量和调节进气压力两种组合方式在高空舱内应用方法可行,测试布局满足测量要求,下游发动机进口截面气流紊流度优于0.3%,满足发动机高空模拟试验要求。      

气喷嘴和声腔对燃烧室声学特性的影响

为了掌握气喷嘴和声腔对燃烧室声学特性的影响规律以及解释声学实验中出现的切向频率分化现象的内在机理,采用声学有限元方法(FEM)并在单喷嘴声学模拟实验验证的基础上,从固有频率和声压分布角度分析了气喷嘴长度、声腔长度和节流嘴直径对燃烧室声学特性的影响规律,利用声压分布成功地解释了实验中出现的频率分化现象。结果表明:当燃烧室某阶切向振型频率与喷嘴1阶纵向振型频率相等时,喷嘴由于共振将切向振型声压幅值极值点附近的能量转移到喷嘴中,改变了燃烧室原切向振型的声压分布,因此在声学实验中产生切向频率分化现象;气喷嘴长度与节流嘴直径之间存在着耦合关系,在液氧煤油补燃发动机喷嘴设计阶段可进行组合参数匹配优化。      

移15°双十二相隐极同步整流发电机数学模型的研究

分别在abc坐标系和dq0坐标系下建立了移15°双十二相隐极同步整流发电机的基本数学方程,推导了电机电压、磁链、输出功率、电磁转矩和转子运动方程。在MATLAB/Simulink中建立了移15°双十二相隐极同步整流发电机的仿真模型。对两路输出进行了不平衡负载仿真和试验。仿真与试验结果相比基本一致,验证了移15°双十二相隐极同步整流发电机数学模型的正确性。这为双十二相同步整流发电机运行性能和励磁控制系统的研究奠定了基础。     

模型预测控制在永磁同步电机系统中的应用发展综述

随着数字技术的发展,模型预测控制(MPC)已经广泛应用于交流传动系统。首先介绍了经典MPC策略——有限控制集MPC和连续控制集MPC的原理。其次综述了多步预测控制、多矢量预测控制、具有参数鲁棒性的预测控制、广义模型预测、显式模型预测这些常见的改进MPC的研究现状,并提出相关研究思路。最后,根据MPC的应用需求和研究现状,展望了未来需要进一步深入和拓展的研究方向。     

无刷双馈电机静止坐标系数学模型的研究

由于没有电刷和滑环,提高了运行的可靠性,降低了维护成本,因此无刷双馈电机(BDFM)在变速恒频发电领域有着广阔的应用前景。由于特殊的结构和工作原理,BDFM数学模型十分复杂。从BDFM多回路空间矢量数学模型出发,推导出了两个静止坐标系之间的坐标变换关系以及功率绕组静止坐标系数学模型和控制绕组静止坐标系数学模型,推导过程简洁明了。所得结果为BDFM理论分析和不同控制策略的研究提供了理论基础。MATLAB/Simulink环境下的仿真结果验证了数学模型及坐标变换关系的正确性。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.