Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

永磁有限转角力矩电机的仿真与实验

随着多电飞机的快速发展及成附件轻小化、高效能的迫切需求,有限转角力矩电机(Limited Angle Torque Motor,LATM)在飞机引气系统中的应用日益迫切。一方面,有限转角力矩电机可以显著简化高温引气控制阀结构、减小体积;另一方面,可以基于系统需求实现引气压力和温度按需调节,减少燃油代偿损失。针对高温有限转角力矩电机工作特性不易预测的难题,建立了其数学模型、仿真模型,并通过实物试验验证了仿真模型的准确性。研究结果为有限转角力矩电机特性研究提供了参考依据。     

后摆心潜入式喷管柔性接头力学特性数值仿真

针对后摆心潜入式喷管柔性接头在燃气压力与摆动联合载荷下,弹性件与增强件的力学特性计算问题,建立了对称刚体-柔性体结合的几何模型;采用了有限元方法,获取了柔性接头在燃气压力、摆动载荷及联合载荷下应力、弹性比力矩分布规律。研究表明:随着燃气压力增大,弹性比力矩降低;随摆角增大,弹性比力矩增大。文中的数值仿真方法,可以应用于柔性接头力学特性的计算,为柔性接头强度的安全性评估提供指导。     

考虑测量约束的非合作目标近距离快速导引控制方法

研究了考虑测量约束的非合作目标近距离快速导引控制方法。首先,基于C-W方程建立了解析形式的径切联合近距离快速导引控制模型,并采用微分修正方法将解析结果进行修正;然后推导了任意初始条件下,径切联合控制双脉冲与视场角的解析关系;最后基于相对偏心率矢量建立了径切联合控制的控后效果评估模型。仿真结果表明:提出的控制方法和控后效果评估模型有效。     

星载综合孔径微波辐射计冗余空间定标方法研究

星载综合孔径微波辐射计系统为了实现更好的辐射测量性能,在地面对通道间剩余相位通过相位定标实验进行测量,其结果用于亮温重构时对通道间剩余相位进行补偿。冗余空间定标方法基于自身阵列冗余基线信息,该方法无需额外资源支持即可对星载综合孔径微波辐射计系统定标,可作为一种在轨的验证方案对系统综合孔径微波辐射计系统通道间剩余相位进行评估。系统性的介绍了基于星载综合孔径微波辐射计系统观测到的场景,冗余空间定标方法以及对平坦场景提出利用模拟的平坦目标响应相位修正的方法,可在点源场景、平坦场景下利用冗余空间定标方法求解通道间剩余相位,并结合仿真验证该方法的可行性。     

河北省产业集群研究

基于菱形模型来分析河北省目前产业集群的现状和存在的问题,在政府职能定位、创新、特色产业集群等角度试图探求集群升级的策略。     

运载火箭姿控对迭代制导适应性分析的仿真方法研究

首先给出了迭代制导方法,然后建立了姿态动力学全量数学模型,在考虑弹性振动和液体晃动的情况下,进行了制导与姿控系统的六自由度联合仿真.仿真结果表明,在迭代制导实时优化输出程序角的情况下,姿控系统具有良好的跟踪性能;在制导与姿控子系统相互作用的情况下,能够确保制导程序角的收敛和姿态的稳定.     

基于查表的开环MPM预失真器

提出了一种基于查表的开环记忆多项式模型(MPM,Memory Polynomial Model)预失真器.从MPM预失真器系数估计和执行信号预失真处理两方面加以考虑.首先,利用预失真器和高功率放大器(HPA,High Power Amplifier)传输特性的互补性,由采集到的HPA输入、输出基带数据进行单次最小二乘估计得到MPM预失真器的系数,避免了以往递归结构的收敛性和计算量大等问题.然后,利用MPM预失真器的特点,建立了基于输入信号强度索引的一维向量表,通过查表实现MPM预失真器的幂次累加项,极大地减少了实现预失真器所需的计算量及硬件开销.仿真显示,采用提出的预失真器可以有效补偿HPA对信号的记忆非线性失真,有效带宽内获得了近20 dB的功率改善,也显著改善了系统误码性能.     

喷管扩张段绝热层的烧蚀计算

固体火箭发动机喷管的烧蚀预示是喷管结构分析的重要一环，本文用有限元法计算了喷管扩张段绝热层的烧蚀，计算中了对流换热１、材料热解及烧蚀吸热。计算结果与发动机热试车解决结果相近。     

高速加工HSK工具系统的力学模型

根据HSK工具系统的结构和工作机理建立了HSK工具系统的力学模型,分析了影响工具系统刚度的主要因素和载荷与加工质量之间的关系,揭示出HSK工具系统刚度变化的基本规律,理论分析结果与实验结果吻合.在此基础上,提出评估工具系统的性能不仅要考虑工具系统的静刚度,而且要进一步考虑工具系统的动刚度.最后,给出了HSK工具系统型号的选择原则,并建立了相应的优化操作条件.