A nonlinear equivalent circuit method for analysis of passive intermodulation of mesh reflectors

Passive intermodulation(PIM) has gradually become a serious electromagnetic interference due to the development of high-power and high-sensitivity RF/microwave communication systems, especially large deployable mesh reflector antennas. This paper proposes a field-circuit coupling method to analyze the PIM level of mesh reflectors. With the existence of many metal–metal(MM) contacts in mesh reflectors, the contact nonlinearity becomes the main reason for PIM generation. To analyze these potential PIM sources, an equivalent circuit model including nonlinear components is constructed to model a single MM contact so that the transient current through the MM contact point induced by incident electromagnetic waves can be calculated. Taking the electric current as a new electromagnetic wave source, the far-field scattering can be obtained by the use of electromagnetic numerical methods or the communication link method. Finally, a comparison between simulation and experimental results is illustrated to verify the validity of the proposed method.     

考虑预设性能约束的运输机姿态容错控制

针对运输机舵面故障情况下的姿态容错控制问题,提出了一种考虑预设性能约束的自适应指令滤波增量反步(Adaptive Command-filtered Incremental Backstepping,ACFIBS)容错控制器。首先,构造运输机故障模型,在反步控制设计结构下,通过构造预设性能函数,保证外回路姿态角跟踪误差的动态性能。然后,考虑舵机偏转速率和幅值限制,引入受限指令滤波器和补偿信号,综合考虑气动参数不确定性,采用增量方法设计反步内环控制律。在此基础上,进一步考虑舵面故障情况,引入自适应方法及低通滤波器改进增量反步控制器。最后,通过理论推导和仿真试验验证了控制方法的有效性。仿真结果表明,所设计的控制器具有良好的容错性能,在不同舵面故障条件下均可实现对指令信号的预设性能跟踪,且在参数摄动情况下具有较强的鲁棒性。     

印刷电路板无源互调机理研究进展

当前印刷电路板广泛应用于现代电子设备中,通信频率、功率和数据信号容量的增加对基于印刷电路板的设备的无源互调性能提出了极其严格的要求。文章综合论述了国内外印刷电路板无源互调问题的研究现状,从电路板涉及的相关无源互调机理研究出发,梳理了目前印刷电路板中无源互调机理研究的经典建模,并进一步总结了当前印刷电路板无源互调测试的热点研究方向。文章从印刷电路板材料的选择及平面电路的设计方面综述了无源互调抑制方法。将为之后工程应用中无源互调机理的研究和建立无源互调分析的非线性模型提供技术参考。同时在建立高精度无源互调测试平台,进行无源互调定位与诊断技术研究,建立无源互调预测和验证平台方面也有重要的参考价值。     

Flutter and gust response analysis of a wing model including geometric nonlinearities based on a modified structural ROM

In this paper, a framework is established for nonlinear flutter and gust response analyses based on an efficient Reduced Order Model (ROM). The proposed method can be used to solve the aeroelastic response problems of wings containing geometric nonlinearities. A structural modeling approach presented herein describes the stiffness nonlinearities with a modal formulation. Two orthogonal spanwise modes describe the foreshortening effects of the wing. Dynamic linearization of the ROM under nonlinear equilibrium states is applied to a nonlinear flutter analysis, and the fully nonlinear ROM coupled with the non-planar Unsteady Vortex Lattice Method (UVLM) is applied to gust response analysis. Furthermore, extended Precise Integration Method (PIM) ensures accuracy of the dynamic equation solutions. To demonstrate applicability and accuracy of the method presented, a wind tunnel test is conducted and good agreements between theoretical and test results of nonlinear flutter speed and gust response deflection are reached. The method described in this paper is suitable for predicting the nonlinear flutter speed and calculating the gust responses of a large-aspect-ratio wing in time domain. Meanwhile, the results derived highlight the effects of geometric nonlinearities obviously.     

Adaptive fuzzy neural network control for a space manipulator in the presence of output constraints and input nonlinearities

Space manipulator is considered as one of the most promising technologies for future space activities owing to its important role in various on-orbit serving missions. In this paper, a novel adaptive fuzzy neural network (FNN) control scheme is proposed for the trajectory tracking control of an attitude-controlled free-flying space manipulator in the presence of output constraints and input nonlinearities. The parametric uncertainties and external disturbances are also taken into the consideration. First, a model-based controller is designed by using the barrier Lyapunov function (BLF) to prevent the position tracking errors from violating the predefined output constraints. Then, an adaptive FNN controller is designed by using two FNNs to compensate for the lumped uncertainties and input nonlinearities, respectively. Rigorous theoretical analysis for the semiglobal uniform ultimate boundedness of the whole closed-loop system is provided. The proposed adaptive FNN controller can guarantee the position and velocity tracking errors converge to the small neighborhoods about zero, while ensuring the position tracking errors within the output constraints even in the presence of input nonlinearities. To the best of the authors’ knowledge, there are relatively few existing controllers can achieve such excellent control performance in the same conditions. Numerical simulations illustrate the effectiveness and superiority of the proposed control scheme.     

间隙约束二元翼段系统分岔与多解共存现象分析

研究了分段刚度描述的间隙约束二元翼段气动弹性系统,取俯仰角最大幅值处为类Poincaré截面,数值计算得到了系统随飞行速度变化的分岔图,发现飞行速度在Ma=0.71~0.75属于跨临界颤振区,而在Ma=0.75~0.95发生极限环震荡.同时通过构造极限环震荡的四维Poincaré映射分析了极限环震荡的稳定性,结合稳定性和运动流形理论,得到极限环震荡的吸引域一般位于极限环内部并用数值方法进行了验证.且跨临界颤振速度区域中存在多种分岔形式以及多解共存现象,例如由双周期运动直接通向混沌、多周期运动与双周期运动共存现象,振动幅值也存在跳跃现象.     

速率限制舵机描述函数模型研究

基于电传飞行控制系统中速率限制舵机的非线性特征,建立了速率限制舵机的简化模型.提出运用描述函数法建立速率限制舵机的精确正弦描述函数模型、高度饱和与近饱和描述函数模型.将高度饱和与近饱和描述函数模型的频率特性与精确正弦描述函数模型的频率特性进行了对比研究,获得了高度饱和与近饱和描述函数模型的使用域.研究结果可为控制系统中...     

Numerical Prediction of Moduli of 3-D and 4-step Braided Composites

对三维四向编织复合材料的参数化建模技术进行了研究 ,提出了一种“米”字型枝状体胞的计算模型 ,较为真实地模拟了该材料的细观结构 ;在此基础上讨论了相应的边界条件和约束条件并应用有限元方法计算了该材料的纵向、横向弹性模量 .通过与实验结果的对比可见 ,计算结果的预报精度较好     

线化插值权残法求解强非线性振动问题

本文用线性化法，插值函数法和权残法相结合的方法求解了几类保守系统强非线性振动问题，其精度比已有的新的改进的L-P法还更好些。     

抑制飞控系统舵机间隙影响的非线性补偿器设计

通过对舵机间隙非线性特性的分析和极限环的定义及产生条件的讨论,在飞控系统中采用非线性补偿的方法,设计了间隙补偿器,并介绍了其工程实现方法,进行了相应的数字仿真和半物理仿真试验以及试验结果的对比分析。结果表明,此方法有效地解决了飞控系统由于舵机间隙引起的超调与极限环振荡现象,使飞控系统对舵机的频率特性以及间隙各方面要求大大降低,其工程实现方法简单实用、普遍性较强,具有较高的工程应用价值。