CNC数控系统控制软件

本文分析了数控机床控制系统,由硬件NC(Numerical Contro1)向CNC(ComputerNumerical Control)转变时进给速度下降的问题,阐述了解决此问题的一种方法——二次插补方法。指出CNC数控系统是个多重中断系统,论述了将数控的工作按其重要的程度、实时性的高低,安排在不同的优先级,使整个系统协调工作的思想。     

一种TASIMM-UKF导弹状态估计方法

为了提高对机动导弹状态估计的精度和速度,提出了一种三轴分离IMM-UKF(TASIMM-UKF)滤波算法。将导弹运动状态按坐标轴方向进行三轴分离,并基于CV,CA和CJ模型集,采用无迹卡尔曼滤波器并行估计导弹三轴状态信息,有效地解决了导弹不同运动轴间的模型竞争问题。仿真结果表明,该方法能有效提高状态估计精度,缩短了估计时间,对复杂大机动目标状态估计具有良好的性能。     

突出专业特色 建设飞行学生公寓文化

准军事化管理是民航院校根据民航飞行这一职业特点,对飞行技术专业大学生所实施的管理模式。公寓文化既是准军事化管理的重要载体,也是民航院校校园文化建设的重要内容。为培育高素质的民航飞行人才,加强飞行学生公寓文化建设具有重要的现实意义。本文主要分析了飞行学生公寓文化建设的总体目标、具体要求、实施途径,并且介绍了在工作中取得的初步实践成果。     

基于气压高度辅助的机载自主完好性监测算法

卫星接收机自主完好性监测是指根据用户接收机的多余观测值监测用户定位结果的完好性,其目的是在导航过程中检测出发生故障的卫星,并保障导航定位精度。针对卫星接收机自主完好性监测算法可用性不足的问题,结合机载实际导航系统配置,提出了一种基于气压高度表辅助的机载自主完好性监测算法。综合利用卫星导航系统及气压高度表观测信息,建立联合系统的观测模型,推导了基于多解分离的完好性监测及保护级别计算方法。仿真结果表明,相比于传统的接收机自主完好性监测算法,该算法在可见星为5颗时仍能识别故障卫星。该算法具有更好的故障检测能力及可用性,能有效提高卫星导航系统的完好性监测性能,从而保证卫星导航系统的精度和可靠性。     

指数分布基于多重定数截尾样本中异常数据的检验

讨论多重定数截尾指数型寿命数据,对同时存在异常大数据和异常小数据的情形给出了检验方法,得到了检验异常数据的判别标准,最后以一实例说明其应用.     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

主/从动式组合旋翼悬停状态气动特性分析

针对传统直升机构型中主旋翼旋转时产生的扭矩需要尾翼或是反向旋转的共轴旋翼加以抵消,从而造成能量浪费的问题,以将主旋翼旋转时产生的扭矩转化为升力为出发点,提出了一种主旋翼带动下方无动力旋翼旋转的主/从动式组合旋翼气动布局构型。通过动量叶素理论以及CFD数值模拟中的多重参考系法,对主/从动式组合旋翼悬停状态的气动特性进行了初步分析,结果表明,此构型中的下方从动旋翼利用上方主动旋翼的扭矩产生了额外10%的升力,同时下方从动旋翼在上方主动旋翼引流的有利干扰下升力系数提高了35%。     

基于多核融合的目标大面积遮挡处理方法

提出了一种基于多核融合的目标遮挡处理方法,用于提高大面积遮挡情况下视觉目标跟踪算法的鲁棒性和准确性.与现有基于单个对称核加权直方图的mean shift跟踪算法不同,该方法以目标区域内的多个非中心位置为核函数中心,构建多个非对称核加权直方图.由于这些直方图对目标的不同区域赋予了不同的权重,使得在遮挡发生时总存在一些直方图受影响较小.依据各个直方图分别进行mean shift迭代获得一组目标位置估计后,利用D-S证据理论融合判定最终的目标位置.实验结果表明,该方法在目标被大面积遮挡时仍能够获得准确的跟踪.     

关于跨声速流动问题的多重解

本文讨论了跨声速流小扰动方程Riemann问题的多重解及物理上可实现的解的判别。