喷管间距对双喷流啸音影响的实验

实验详细测量了完全膨胀马赫数范围为110~160、喷管间距为16到32倍喷管出口直径的超声速双喷流近声场,分析了两个喷流各自发出的啸音在近声场的相位关系,研究了喷管间距对双喷流耦合的影响。结果表明:对比单喷流,双喷流耦合啸音在A模态时,呈现出反对称或对称模式,在反对称模式下,喷管中间区域啸音强度减小,对称模式下,双喷流中间区域啸音强度略大于单喷流啸音;B模态时,两个处于摆动模态的喷流啸音在喷管中间区域同相而发生耦合,极大地增强了B模态的幅值,达到160dB;C模态的相位关系还需进一步研究。对比不同喷管间距下的双喷流近声场,发现喷管间距过小或过大均不利于B模态的耦合;喷管间距对C模态影响最大,当喷管间距变大时,C模态幅值及主导马赫数范围均增大。      

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

分布式动力系统尾缘射流与边界层抽吸的数值分析

为研究带有边界层抽吸的分布式动力系统尾缘射流对机身气动性能及推进效率的影响,将机身简化为二维翼型,并加入尾缘射流及边界层抽吸的作用,利用数值模拟的手段来研究来流攻角、射流偏转角、边界层抽吸对推进效率及气动性能的影响,为分布式动力系统的设计与应用提供初步的建议.结果表明在中、小来流攻角(2°及0.6°)的情况下尾缘射流及边界层抽吸能够提高升阻比,推进效率可超过80%;而在大来流攻角(4°)情况下射流偏转角增大使翼型的阻力大幅上升,对气动性能和推进效率产生极为不利的影响.      

翼伞系统纵向飞行性能分析

翼伞系统的飞行性能不仅取决于翼伞本身的气动特性,而且与安装角、伞绳长度、回收物阻力特征、翼载荷等系统参数密切相关。文章应用拉格朗日方程建立翼伞系统的纵向飞行力学模型,对翼伞系统进行飞行力学数值仿真,深入分析了系统参数以及开伞状态对翼伞系统纵向飞行性能的影响规律。结果表明：只有安装角在0°～20°时,翼伞系统才能达到稳定的滑翔状态,且安装角在4°～6°时对应两个稳定的滑翔状态,具体由开伞姿态和速度决定;伞绳特征长度的增加使系统的静稳定性增加;回收物的阻力特征增加6m2,翼伞系统的稳定滑翔角增加15°左右,而迎角减小不到1°;翼伞飞行速度随着翼载荷的增加而增加,其平方与回收物质量成正比。上述结论可为翼伞系统的工程实际应用提供参考。     

基于动力学递推算法的绳系卫星系统刚柔耦合多体模型

利用动力学递推算法建立了空间绳系卫星系统(TSS)的铰接柔性杆动力学模型.所研究的绳系系统包含两颗刚体绳端卫星和一段连接两颗卫星的柔绳,柔绳离散为一系列球铰连接的弹性杆,考虑杆不均匀的纵向一维形变,并利用球铰的运动模拟柔绳的弯曲和扭转;然后基于递推算法推导得出了该刚柔混合离散模型的动力学方程.数值仿真结果表明:所建立的绳系卫星系统模型能够很好地模拟空间系绳的各向摆振和扭转,此外,递推算法的引入能够有效地减少离散模型动力学方程的维数,从而大幅减少计算量.      

Manifold dynamics in the Earth–Moon system via isomorphic mapping with application to spacecraft end-of-life strategies

Recently, manifold dynamics has assumed an increasing relevance for analysis and design of low-energy missions, both in the Earth–Moon system and in alternative multibody environments. With regard to lunar missions, exterior and interior transfers, based on the transit through the regions where the collinear libration points L₁ and L₂ are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is focused on the definition and use of a special isomorphic mapping for low-energy mission analysis. A convenient set of cylindrical coordinates is employed to describe the spacecraft dynamics (i.e. position and velocity), in the context of the circular restricted three-body problem, used to model the spacecraft motion in the Earth–Moon system. This isomorphic mapping of trajectories allows the identification and intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Heteroclinic connections, i.e. the trajectories that belong to both the stable and the unstable manifolds of two distinct periodic orbits, can be easily detected by means of this representation. This paper illustrates the use of isomorphic mapping for finding (a) periodic orbits, (b) heteroclinic connections between trajectories emanating from two Lyapunov orbits, the first at L₁, and the second at L₂, and (c) heteroclinic connections between trajectories emanating from the Lyapunov orbit at L₁ and from a particular unstable lunar orbit. Heteroclinic trajectories are asymptotic trajectories that travels at zero-propellant cost. In practical situations, a modest delta-v budget is required to perform transfers along the manifolds. This circumstance implies the possibility of performing complex missions, by combining different types of trajectory arcs belonging to the manifolds. This work studies also the possible application of manifold dynamics to defining suitable, convenient end-of-life strategies for spacecraft orbiting the Earth. Seven distinct options are identified, and lead to placing the spacecraft into the final disposal orbit, which is either (a) a lunar capture orbit, (b) a lunar impact trajectory, (c) a stable lunar periodic orbit, or (d) an outer orbit, never approaching the Earth or the Moon. Two remarkable properties that relate the velocity variations with the spacecraft energy are employed for the purpose of identifying the optimal locations, magnitudes, and directions of the velocity impulses needed to perform the seven transfer trajectories. The overall performance of each end-of-life strategy is evaluated in terms of time of flight and propellant budget.     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

激波引燃冲压发动机一体化流场数值模拟

激波引燃冲压发动机是一种采用爆轰形式组织燃烧的吸气式高超声速飞行器动力系统。采用AUSMPW+迎风格式、氢氧7组分8步基于反应模型,在非结构网格离散域上求解二维多组分化学非平衡流Euler方程。采用发展的数值方法求解了激波引燃冲压发动机内外一体化流场,研究了台阶长度、斜劈尖角度对发动机流场结构和发动机性能参数的影响规律。计算结果表明,所发展的数值方法能用于激波引燃冲压发动机的一体化流场和性能预示计算;台阶长度和斜劈尖角度影响发动机流场结构和预混气体能量释放程度。推力和燃料比冲均随台阶长度的增大而增大,随斜劈尖角度的增大而减少。     

深空探测着陆器数字化设计及着陆性能影响因素

以对称分布四腿悬架式月球着陆器为研究对象,建立了着陆器软着陆过程六自由度动力学模型并改进了月壤摩擦系数模型;在以上动力学模型基础上,以月球着陆器为例编制了着陆器软着陆六自由度动力学分析程序,利用该程序分析了探测器全机月面软着陆性能,重点研究了动力学模型中的月面等效弹性系数、月面摩擦系数和月面倾斜角度等参数对探测器着陆性能的影响。研究表明上述影响因素对着陆器着陆缓冲性能影响显著,通过对以上参数的合理选择可以有效缓解月球探测器月面软着陆的着陆冲击过载。     

可应用于民机空气动力设计中的数值优化方法

目前民机成功设计的一个关键要素即在设计中有效地引入计算流体力学（CFD）的模拟方法和软件,特别是具有设计能力的方法和工具。本文概要地叙述了反设计、基于CFD低可信度和高可信度模型等数值优化方法的发展和应用于民机设计的历史和现状;简单地介绍了即将举行的空气动力优化设计计算系列研讨会;重点讨论了对可应用于民机设计的基于Navier-Stokes方程解算器的OPTIMAS的数值优化方法的要求及其构造方法,并以翼身组合体整流外形和翼身融合体（BWB）外形的算例表明其有效性,说明OPTIMAS可以成为民机日常设计的方法和工具之一。