套齿连接转子简化建模及动力特性分析

在进行转子和整机计算时建立套齿结构接触模型会增加计算量，降低计算效率，直接将套齿结构省略又无法体现其刚 度特性变化对转子动力特性的影响。针对该问题，基于航空发动机单圆柱面套齿连接的结构和力学特征，建立了考虑构件间界面 接触状态的力学特征分析模型，提出了考虑套齿结构刚度随参数变化的简化建模方法，并与套齿接触模型进行了对比分析。建立 了单圆柱面套齿连接结构转子简化模型，开展了相应的转子动力特性试验，对比分析了拧紧力矩对转子模态频率的影响。结果表 明：转子简化模型与试验模型最大计算误差小于5%，证明套齿结构简化建模方法具有较高的可靠性和准确性，可为工程实践中高 效开展含套齿结构转子及整机动力学准确计算分析提供方法与参考。     

基于正弦基础激励的航天器结构模型修正方法

正弦振动试验是航天器系统级和单机产品需要开展的常规试验,充分利用工程中积累的正弦试验数据进行结构模型修正具有重要的工程意义。文章首先介绍了基础激励下结构模型修正方法,通过矩阵分块、待修正参数归一化、参与修正的频率点选择等步骤,推导出基于基础激励的模型修正公式;然后对国际通用算例GARTEUR桁架结构的有限元模型进行修正,分析修正后模型在修正频段内和修正频段外计算所得模态频率,验证修正后模型对模态频率的复现和预示能力,通过对比试验模型、分析模型和修正后模型中4个典型节点的响应曲线,检验修正后模型精度。结果表明:修正后模型的模态频率和响应曲线均与试验模型趋于一致,证实了该修正方法对GARTEUR结构修正的有效性。     

基于CFD/CSD耦合的叶轮机叶片失速颤振计算

为了研究叶轮机叶片的失速颤振特性,发展了一种计算流体力学与计算结构力学(CFD/CSD)时域耦合方法。该方法通过每一物理时刻CFD和CSD的循环迭代实现了耦合计算。在CFD分析中,采用鲁棒性较好的空间离散格式AUSM+-UP,并基于延迟脱体涡模型(DDES)模拟了带分离流动。在结构分析中,通过模态法构建了旋转叶片动力学方程并运用杂交多步方法进行求解。以孤立转子Rotor37为例,计算了不同工况下流场总体与细节参数,与实验结果的对比验证了CFD算法的精度。对某转子叶片进行了颤振特性研究,计算所得的广义位移时间响应曲线表明该叶片在近失速工况下会发生失速颤振,其表现形式为一阶弯曲模态发散且各阶模态之间不耦合。分析表明,流场不稳定和非定常效应是引起失速颤振的关键因素,同时折合频率的降低也会导致原本气动弹性稳定的叶片发生失速颤振。     

波音777飞机ACARS系统及马航MH370航班失联事件分析

马来西亚航空公司MH370客机失联事件一度引发媒体与公众的诸多猜测,猜测的焦点之一就是执飞的波音777飞机的飞机通信寻址与报告系统(Aircraft Communication Addressing and Reporting System,简称ACARS)功能是如何被关闭的。从专业角度出发,首先采用Sys ML建模的方式描述了波音777飞机ACARS系统的详细架构和人机接口,并据此深入分析了马航MH370航班失联事件中ACARS被关闭的情景。最后,提出了此次事件暴露出的现代民用飞机设计中存在的问题以及改进方法。     

End-to-End Modeling of the Solar Terrestrial System

Traditionally modeling for space science has concentrated on developing simulations for individual components of the solar terrestrial system. In reality these regions are coupled together. This coupling can be as simple as the driving of the magnetosphere – ionosphere – thermosphere system by the solar wind or as a complicated as the feedback of the ionospheric conductivity and currents on the magnetosphere. As part of the CISM project we are beginning a concentrated effort to compressively model the entire system. This approach includes chains of models. In the first chain physics based numerical models are utilized while in the second chain empirical models are coupled together. The first half of this paper discusses the numerical modeling approach by highlighting the coupling of pairs of regions within the system. In the second section we present results from empirical models which are combined to make long term forecasts of conditions in the geospace environment. It is expected that a validated and reliable forecast model for space weather can be obtained by combining the strongest elements of each chain.     

基于液压自然爆膜的压力传感器动态标定方法

介绍了一个基于液压自然爆膜的压力传感器动态校准系统，研究了标定实验数据的处理方法，分析了该系统标定结果的重复性。试验结果表明该标定系统重复性好，可以满足0～30MPa，0～50kHz压力传感器动态标定的要求。     

模拟中性大气边界层中污染物传输与扩散的动力相似讨论

文章从湍流雷诺数相等出发,推导出风洞中模拟中性大气边界层动力相似准则一充分发展的湍流中,运动相似的流动动力也相似。文章还讨论了模拟烟流抬升和扩散的相似准则,概述了国内外一些主要实验室应用的近似模拟技术。     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

熔融沉积成型连续碳纤维增强尼龙蜂窝芯材的压缩特性

采用熔融沉积成型方法成形了连续碳纤维增强尼龙复合材料蜂窝芯材,并对不同测试方向的静态单轴压缩特性进行了表征分析,着重关注不同测试方向熔融沉积成形蜂窝芯材平面静态压缩破碎行为和能量吸收行为,并与纯聚合物基体进行对比。结果表明:X_1方向的压缩平台区域的力-位移曲线更加平滑稳定,且载荷值稍高于X_2方向,因此X_1方向更适用于能量吸收应用;此外,连续纤维的增强作用可使蜂窝芯材的平台载荷值得到明显提升。研究结果为连续纤维增强聚合物复合材料的空间增材制造提供理论基础。     

云制造环境下机床装备资源选择方法

针对云制造环境下机床装备资源具有数量大、异质异构、服务制约因素多等问题，提出了基于多准则决策的机床装备资源选择方法。首先，利用本体论对机床装备资源建模，将物理资源虚拟化封装，实现虚拟资源与物理资源的逻辑映射。进一步地，使用语言变量量化决策者评估信息，采用模糊决策与试验评价实验室（FDEMATEL）和熵值法（EW）相结合的组合赋权法，引入模糊VIKOR（FVIKOR）多属性决策方法对机床装备资源进行综合评估，建立FDEMATEL-EW-FVIKOR的多准则混合决策模型。最后，将该方法应用于某生产制造企业，实验对比决策结果验证了多准则混合决策模型的可行性和有效性。