轻质复合材料发射箱盖结构设计与参数优化

 针对国内现阶段复合材料发射箱盖研制领域中所存在的一些缺陷,通过设计一种方形轻质复合材料发射箱盖结构提出解决方案。首先提出了结构中薄弱区与抛出部分的初步设计方案;然后对导弹发射时燃气流冲击箱盖过程进行了瞬态数值模拟,并根据数值模拟结果对箱盖结构参数进行了优化;最后针对优化结构冲破过程进行了数值模拟,结果表明,按优化后方案设计的箱盖结构既能实现结构的轻质化,又能在开盖过程中保证较好的冲破性能。     

2/3层板结构空心风扇叶片设计与对比分析

针对空心结构风扇叶片设计技术在航空发动机上的应用,分析了2/3层板空心叶片结构特点,提出了1种基于气动数据源的空心叶片结构设计方法,并以某风扇叶片为例开展了2种结构空心叶片设计,有限元对比分析结果表明:2种结构空心叶片在静强度、振动特性方面各有优势,但2层板结构空心叶片可设计性更优,应用前景更好.     

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

Non-Thermal Processes in Cosmological Simulations

Non-thermal components are key ingredients for understanding clusters of galaxies. In the hierarchical model of structure formation, shocks and large-scale turbulence are unavoidable in the cluster formation processes. Understanding the amplification and evolution of the magnetic field in galaxy clusters is necessary for modelling both the heat transport and the dissipative processes in the hot intra-cluster plasma. The acceleration, transport and interactions of non-thermal energetic particles are essential for modelling the observed emissions. Therefore, the inclusion of the non-thermal components will be mandatory for simulating accurately the global dynamical processes in clusters. In this review, we summarise the results obtained with the simulations of the formation of galaxy clusters which address the issues of shocks, magnetic field, cosmic ray particles and turbulence.     

复合材料加筋壁板制造成本的快速估算模型

为了能够在设计阶段早期对复合材料加筋壁板制造成本进行快速估算,提出了一种以结构设计重量为主要驱动因素的制造成本估算模型。该模型的关键是考虑了诸如材料成本比重系数、制造工艺系数、蒙皮形状系数、筋条形状系数、材料利用率系数等合理取值。以某验证试验的试验件制造成本估算为例,估算成本与实际制造成本的偏差为10.8%,说明了采用该方法对复合材料加筋壁板制造成本进行快速估算的结果是可以为设计人员提供决策依据的。     

飞机高能束增材制造结构研究

轻质高效、长寿命、多功能、低成本、快速响应制造是现代飞机结构技术的发展方向,但受限于传统制造技术,一些创新的结构存在"设计得出却造不出"的问题。高能束增材制造技术的发展为新概念结构工程的实现提供了契机。基于高能束增材制造技术,针对现代飞机结构特征需求,提出了大型整体化、梯度复合化和功能结构一体化等发展方向,创建了新概念构型,开展了设计与评定方法研究,提出了基于技术成熟度的工程化验证模式。     

航空航天智能材料与智能结构研究进展

智能材料作为新兴多功能材料,能够实现结构功能化、功能多样化。智能结构是在结构中集成智能材料作为传感器和驱动器,使结构除了具有承载、传力、连接等功能外,还具有自感知、自诊断、自驱动、自修复等能力,以更好地适应外界环境的变化,可显著提升航空航天架构的性能。目前智能材料与智能结构已成为航空航天架构减重增效研究的重点。根据国内外智能材料和结构的研究进展,综述了压电材料、铁磁材料、形状记忆材料、智能复合材料等智能材料的发展;讨论了智能结构的研究及应用前景,包括自诊断智能结构、自修复智能结构和减振降噪智能结构;最后,指出了智能材料与结构当前面临的一些挑战性问题,展望了其在航空航天领域的应用前景。     

分层结构的雷达告警设备软件测试方法

雷达告警设备是现代作战飞机不可或缺的雷达对抗设备,主要用于对敌方雷达威胁信号的告警.分析了分层结构的雷达告警设备软件的特点,借鉴集成测试中自底向上增量式集成策略,提出了一种综合运用调试、插桩和仿真的配置项测试方法.测试结果表明,方法对此类以数据处理功能为核心、分层结构设计的嵌入式软件测试,有很好的借鉴作用.     

变循环发动机总体结构和模式转换机构研究

根据1种涡扇发动机的总体结构设计方案,围绕变循环特征的适应性进行了改进设计,给出了变循环发动机的总体结构初步方案,设计了模式转换原理及其结构实现方案;以其可调面积涵道引射器的设计为例,进行了模式转换机构运动仿真及其关键件的有限元分析,从机构运动和强度分析方面确定了该方案的可行性.