基于离散粒子群算法的航空发动机总装工艺优化方法

为了提高航空发动机总装工作的效率与质量,加强对总装工序和总装机件的管控,量化不同总装人员工作任务量,提高发动机总装的一致性和可追溯性,提出了1种发动机总装分区优化方法。以改进的2进制粒子群算法为基础,平衡了发动机总装各区域的工作内容,最小化各总装区域的工作差异,增强了每个区域装配机件的关联度,提高了总装工作的并行度,从而提高了装配质量。以某型发动机总装区域划分工作为实例,通过上述算法进行了总装区域划分,量化了所有装配区域每一工序的具体装配内容,减小了不同装配区域间的机件差异,杜绝了缺件、剩件等装配问题。     

基于功能脆弱性的空中交通相依网络流量分配

依据空中交通管理与航班运行规则,采用复杂网络理论构建由机场、航路与管制扇区组成的相依网络模型,建立不同扰动策略的影响规则,提出以网络流量熵和交通流损失比变化率为指标识别网络功能脆弱性。并以网络总流量熵最小为目标,建立基于改进遗传算法的网络流量协调分配策略,以降低空中交通相依网络的脆弱性。以民航华北地区空域为原型,发现了其相依网络脆弱性表现规律和脆弱源,采用遗传算法求解网络流量分配方案,优化结果降低了网络总熵值和功能脆弱性,其中机场网络流量分配后效果最为显著,验证了方法的有效性,研究结果可为空中流量管理决策提供一定的理论支撑。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

无人机测控链路信道传播损耗模型研究

无人机测控链路的稳定可靠是确保无人机充分发挥军事和民用效能的重要保证之一。针对无人机测控链路系统设计中的空间传播损耗精确计算问题,参考ITU-R（国际电信联盟无线电通信组）P.528传播损耗模型,从自由空间损耗、大气吸收损耗和可变损耗三个方面进行了仿真研究,获得了视距条件下三种损耗衰减值与传播频率、通信距离、通信终端高度等参数的一般关系。根据提出的传播损耗精确计算方法,对某无人机典型应用场景下的传播损耗进行了分析计算。与传统损耗模型的计算结果相比,采用的方法可以获得更加精确的计算结果,对无人机测控装备的设计研制具有重要的借鉴意义。     

100 kWe级空间快堆核电源系统仿真平台开发与应用

空间核反应堆电源作为一种具有竞争力的空间电源方案,正逐渐受到关注及应用。本文针对一个100 kWe级锂冷快堆耦合布雷顿循环的空间堆核动力系统方案,修改了RELAP5程序中的物性程序、换热模型,程序中的中子动力学模块使用蒙特卡洛方法计算快堆物理参数与堆芯控制调节参数,由此集成并建立一个空间快堆核动力系统综合仿真平台,应用该平台对100 kWe级空间堆核动力系统进行了稳态模拟与事故分析。结果表明:在瞬态发生后系统各参数变化符合预期,验证了各部件及控制系统的功能性及有效性;同时,还初步进行了仿真平台用于100 kWe级空间反应堆核动力系统设备的设计优化的实践,为空间快堆设计与安全分析提供了技术储备。     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

基于Optistruct的结构静动力拓扑优化设计

基于Optistruct平台,研究了二维平面薄板及三维结构的静力、动力以及静动力联合的拓扑优化,给出了典型结构的算例,对比了优化参数取值不同时所对应的优化结果,探讨了优化过程中的网格依赖性以及拓扑优化的效率等问题.     

连续突变管道流动局部水头损失建模研究

管道系统中设置的阀门、限流环等十分常见,装备限流装置的管道本质就是典型的连续突变管道。突变管道流动存在十分明显的局部水头损失,因此工程设计人员在进行管道系统设计时不得不考虑因管道突变而产生的局部水头损失;目前针对单个突变管道流动局部水头损失已有较为深入的研究,并已推导出相应的计算模型,但对于连续突变管路的水头损失研究较少,工程设计中对于连续突变管路的局部水头损失计算采用基于单个突变管道水头损失的叠加计算法,由于连续突变管路流动为极其复杂的湍流,基于单个突变管道水头损失的叠加计算法而得到的连续突变管路的局部水头损失结果误差较大。鉴于此,采用理论推导与实验相结合的方法,设计四种不同管径比的管道以及23种不同进口流量工况,并以航空煤油为介质进行实验,利用实验结果进行分析并对传统的突变管道水头损失的叠加计算法进行修正,提出了连续突缩突扩管道的局部水头损失修正计算模型,其计算结果相比于传统计算方法在精度上得到了显著性提高,为工程管道系统设计中的连续突变管路局部水头损失计算提供了有力依据。