烧结双多孔介质中沸腾换热的实验研究

对由铜粉烧结而成的三种双多孔介质结构进行了沸腾换热的实验。为了便于比较，同时对两种单多孔介质进行了沸腾换热实验。结果发现：当双多孔介质的微孔径和单多孔介质的孔径相同时，双多孔介质的换热系数和临界热流密度比单多孔介质高得多；对于同样微孔径的双多孔介质，存在最佳的粗孔径，其换热系数和临界热流密度最大；当逆静水压头减小的时候，换热系数和临界热流密度增加。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

高原机场终端区飞行闭环稳定性分析

分析了高原机场终端区飞行的特殊性和影响高原机场飞行闭环稳定性的各种不利因素,指出了在高原机场缺氧条件下对飞行员数学模型修正的必要性和修正方法.采用等效闭环系统方法分析飞机在高原机场环境下的闭环稳定性,利用该思路可以用常规的分析方法研究高原机场飞行员缺氧条件下的闭环稳定性.     

Thermal cyclotron radiation from a hot coronal loop with helical magnetic field

The spectral and polarization properties of thermal cyclotron radio emission from a hot coronal loop with a current along the axis are computed. The magnetic field is supposed to have a component along the loop axis as well as a poloidal part due to the current, both components being of comparable magnitude. In this specific configuration a helical magnetic field is present with a remarkable minimum of its absolute value along the loop axis and a maximum at its periphery. The presence of one or two maxima of magnetic field value along the line of sight results in increasing optical thickness of the gyroresonance layers at appropriate frequencies in the microwave band and, therefore, in enhanced radio emission at those harmonics which are optically thin (for example,s=4). These cannot be observed in models with the commonly employed magnetic field configuration (longitudinal along the loop axis).We show that the frequency spectrum of thermal cyclotron radiation from a hot coronal loop with a helical magnetic field differs from that of the standards-component source (with smooth frequency characteristics and polarization corresponding toe-mode) in that plenty of fine structures (line-like features and cut-offs) are present and theo-mode is prevalent in some frequency intervals. The enhanced radio emission at high harmonics and the complicated form of frequency spectrum in the model considered imply that some microwave sources, which are poorly explained in traditional models of solar active regions, may be associated with helical magnetic fields in hot coronal loops. Computations allow one to indicate spectral and polarizational peculiarities of local sources testifying to the presence of a helical magnetic field.     

可编程数字锁相环的研制

介绍一种可编程数字锁相环。它由单片机和数字锁相环构成。其中锁相环的工作状态和参数由单片机处理和控制。这样能较好地解决稳态误差与稳态建立时间之间的矛盾，基本上实现了在保证稳态误差小的同时，可大幅度地缩短稳态建立时间的目的，使原来的数字锁相环的性能更优。     

基于EVENT模型的单向循环航路侧向碰撞风险分析

我国空域骨干航路拥挤不堪,一些支线航路的利用率却很低,单向循环航路的出现很好地解决了这一问题,对其进行安全评估是划设航路最重要的工作之一。在总结EVENT理论和相关文献的基础上,对单向循环航路和混合航路侧向碰撞风险进行比较分析,推算出目标安全等级下单向循环航路容量,并对单向循环航路侧向碰撞风险进行预测。结果表明,单向循环航路侧向碰撞风险远低于混合航路侧向碰撞风险,且未来10年均保持在比较稳定的安全水平。     

反向式蒸发器芯层内蒸汽阻力的分析计算

对毛细抽吸两相流体环路（ＣＰＬ）系统在正常稳态运行时的状态进行分析,知反向式蒸发器在此情况下主要以芯层表面蒸发的方式传热。在此基础上,提出等厚膜层计算方法,且利用此模型对蒸汽在膜层内的流动阻力进行计算,知此阻力大小对一般ＣＰＬ回路来说,是应该予以考虑的。并从计算中知道,蒸发器芯层渗透率的大小对此流动阻力的影响甚大。     

用于RFOG的光学锁相环仿真研究

谐振式光纤陀螺是实现光纤陀螺小型化发展的重要方向,具有广阔的应用背景和很好的应用前景。而激光器作为谐振式光纤陀螺的关键设备之一,其性能直接影响着谐振式光纤陀螺的精度。为了解决谐振式光学陀螺的背反噪声问题,采用光学锁相环技术对激光器频率进行锁定的方案,通过对光学锁相环进行建模、仿真分析,重点研究了锁相原理及锁相方案,验证了基于电流调制的半导体激光器的光学锁相环可行性。最终验证了光学锁相环的相位锁定效果,实现了两激光器输出频率差值稳定的设计目标。     

基于改进控制策略与动态无功支撑相结合的高电压穿越方法研究

针对双馈风力发电机高电压穿越问题,利用Laplace变换对电网电压骤升时电磁暂态过渡过程进行分析,得出定子电流不仅含有直流分量,还包含有工频交流成分,并通过仿真频谱验证了理论分析的正确性。不同于常规研究中只在转子电压方程考虑定子磁链的动态变化,而忽略了其对功率外环的影响,分析了定子磁链动态变化对有功、无功解耦的影响,在此基础上对功率外环进行传统矢量控制策略的改进。此外,考虑并网规范对机组无功电流支撑的要求,控制换流器输出与电网电压骤升幅度相匹配的无功电流,帮助故障电网快速恢复。仿真结果表明,该方案不仅能够保证电网电压骤升时双馈机组不脱网运行,而且也满足并网规范对机组无功电流输出的要求,实现高电压穿越。     

具有轨道倾角和最大高度约束的耗尽关机闭路制导

快速响应空间固体运载火箭轨道转移级以最大限度利用能量而非消耗能量为目的进行耗尽关机制导,基于椭圆轨道理论和牛顿迭代法,提出了一种适用于具有轨道、制导多种约束的耗尽关机闭路制导方法,通过实时寻找需要推力方向,充分利用轨道转移级能量,导引上面级进入具有给定轨道倾角和最大高度约束的转移轨道,同时实现耗尽关机.理论推导和数学仿真表明,本文提出的制导方法能在耗尽关机条件下实现对转移轨道的高精度控制.