Effect of longitudinal lift distribution on sonic boom of a canard-wing-stabilator-body configuration

After the last flight of the Concorde in 2003, sonic boom has been one of the obstacles to the return of a supersonic transport aircraft to service. To reduce the sonic boom intensity to an acceptable level, it is of great significance to study the effect of lift distribution on far-field sonic boom, since lift is one of the most important contributors to an intense sonic boom. Existing studies on the longitudinal lift distribution used low-fidelity methods, such as Whitham theory, and in turn,o...     

新型凹入式螺旋结构增爆器的实验研究

本实验以脉冲爆震火箭发动机(简称PDREs)系统为实验平台,以液态航空煤油作为燃料,以压缩氧气作为氧化剂,以压缩氮气作为隔离气,分别对安装三种不同截面形式(半圆形、方形、三角形)的凹入式螺旋结构增爆器以及作为基准的Shchelkin螺旋结构增爆器进行了实验研究。实验结果表明,三种不同截面的凹入式增爆器均能有效强化爆燃向爆震转变(DDT)过程,在长径比为12.17的增爆器中均获得了充分发展的爆震波,实现了成功起爆。在流阻损失方面,半圆形凹入式螺旋结构表现出了最好的性能,其推力比Shchelkin螺旋的基准推力高出12个百分点。在多次实验过程中发现,凹入式螺旋结构比Shchelkin螺旋结构更不易烧蚀,工作可靠性更高。     

某大型飞机后缘襟翼气动/机构综合优化设计

大型飞机增升装置的研制不仅需要其提供足够的气动性能,也需要对噪声、舒适性等进行综合考量设计,而增升装置是提高大型飞机综合性能的重要系统,也是目前技术发展亟待研究和解决的重要问题。对于增升装置机构设计,通过设计较为简单的铰链襟翼机构来引导襟翼达到较优位置,然后选择气动性能较好的位置作为新的优化位置,求得较优机构位置。机构位置改变结合气动性能验证需要进行大量的迭代计算以及结果优化,因此以机构设计为基础,探究多目标优化计算的新方法,最终实现气动结构一体化设计目标。选用铰链式后缘襟翼为研究对象,综合考量后缘襟翼旋转与扰流板下偏联合运动对于气动性能影响,利用所研究方法,对其进行气动机构一体化设计并得出设计结果。     

肋参数对液氧甲烷发动机推力室强化换热的影响

为深入研究带肋推力室强化传热的机理，对带肋液氧/甲烷推力室的燃烧与再生冷却进行了流动与传热耦合分析，并针对不同肋高和肋数目进行了参数化分析。结果表明:引入等效平均热流密度的概念可以准确描述带肋推力室中的实际传热过程;平均热流密度总是随着肋数目的增加而减小，当肋高恒定时，由于总换热面积增大，等效平均热流密度会随着肋数目的增加而增大;而当总表面积恒定时，等效平均热流密度会随肋数目的增加而减小。此外，盲目地增大总换热面积并不一定能改善传热强化，甚至会在某些情况下恶化传热，因此在设计过程中也应该结合其他肋参数进行综合考虑。     

Lift enhancement based on virtual aerodynamic shape using a dual synthetic jet actuator

The Dual Synthetic Jet Actuator (DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional (2D) NACA0015 airfoil. The lift enhancement device is composed of a DSJA and a rounded trailing edge (Coanda surface). The two outlets of the DSJA eject two jets (Jet 1 and Jet 2). Jet 1 ejects from the upper trailing edge, which increases the circulation of airfoil with the help of the Coanda surface. Jet 2 ejects from the lower trailing edge, which acts as a virtual flap. The Reynolds number based on the airfoil chord length and free flow velocity is 250000. The results indicate that the circulation control method based on Dual Synthetic Jet (DSJ) has good performance in lift enhancement, whose control effect is closely related to momentum coefficient and reduced frequency. With the increase of the reduced frequency, the control effect of the lift enhancement is slightly reduced. As the momentum coefficient increases, the control effect becomes better. When the angle of attack is greater than 4°, the increments of lift coefficients under the control of DSJ are larger than those under the control of the steady blowing at a same momentum coefficient. The maximum lift augmentation efficiency can reach 47 when the momentum coefficient is 0.02, which is higher than the value in the case with steady blowing jet circulation control.