Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

高超声速边界层转捩机理及应用的若干进展回顾

高超声速边界层转捩对飞行器的热传递、表面摩阻和流动分离等有重要影响,尤其是再入飞行器和吸气式巡航飞行器。然而,人们对边界层转捩机理中的很多问题认识还不清楚,或存在争议。本文从扰动波演化的角度回顾了高超声速边界层感受性、线性稳定性和非线性作用的国内若干研究进展,并以基于谐波共振的人工转捩技术为例示范了这些机理认识在转捩控制上的应用。扰动的产生和发展是认识边界层转捩机理的核心。通过研究扰动波来认识边界层转捩机理,开展应用创新研究对提升飞行器性能具有重要意义。     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

Experimental investigation of shock-buffet criteria on a pitching airfoil

An experimental investigation of the shock-buffet phenomenon subject to unsteady pitching supercritical airfoil around its quarter chord has been conducted in a transonic wind tunnel. The model was equipped with pressure taps connected to the fast response pressuretransducers. Measurements were conducted at different free-stream Mach number from 0.61 to0.76. The principle goal of this investigation was to experimentally discuss the shock-buffet criterion over a SC(2)-0410 supercritical pitching ...     

基于谐振舵面的跨声速抖振抑制探究

跨声速抖振引起的非定常脉动载荷会造成飞行器结构疲劳甚至引发飞行事故,所以跨声速抖振的控制研究逐渐成为航空领域的热点。采用基于Spalart-Allmaras(S-A)湍流模型的非定常雷诺平均方程开展了基于谐振舵面的跨声速抖振抑制研究。首先验证静止NACA0012翼型的抖振边界和频率特性,然后分别从舵偏平衡位置、舵偏幅值、频率以及相角等角度研究了谐振舵面的控制效果。舵偏平衡位置等效于减小了翼型的有效迎角;幅值和频率对抖振抑制效果影响较大,当舵面振荡频率与抖振频率接近时发生共振现象;相角对控制效果有一定影响,在270°相角附近,升力系数幅值减小了60%。在合适的舵偏幅值、频率以及相角组合下,谐振舵面有可能成为跨声速抖振的有效开环控制策略。     

冲压发动机尾喷管实验新方法

阐述冲压发动机尾喷管地面模拟实验的新方法。采用双爆轰技术产生稳定的高焓燃气模拟高马赫数飞行条件下冲压发动机的燃烧气体;利用皮托管测量尾喷管推力,并对测量误差进行了分析;为研究催化复合效应增大推力提供实验基础。     

A参量在高频阻抗测量中的应用

根据微波网络理论提出了利用A参量求解高频阻抗的新方法,并将其应用于网络分析仪系统,对短波阻抗进行了测量。实践证明,该方法与传统的利用S参量的方法(利用反射系数)相比大大地拓宽了阻抗测量范围,在通用仪器上获得了比专用仪器高的测量精度,同时还解决了网络分析仪与非同轴网络的连接问题。     

GRECO中棱边绕射场计算的改进

图形电磁计算 (GRECO)方法是计算复杂目标高频区雷达散射截面 (RCS)的有效方法之一。分析了原始GRECO方法在判定目标图象棱边象素的不足之处 ,给出了相应的改进措施。改进后的软件能够更准确、充分地判定目标的棱边象素及获得棱边参数。在边缘绕射场的计算方面 ,指出了相关文献中存在的错误 ,给出了基于等效电磁流法 (MEC)和物理绕射理论 (PTD)的边缘绕射场计算式 ,及与物理光学 (PO)场叠加求取RCS的完整表达式。计算实例表明 ,新的方法具有更高的准确度 ,与实验测量值吻合     

平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。     

利用机载GNSS-R的有效波高反演技术

采用自主研发的多源多宿GNSS-R(Global Navigation Satellite System-Reflections,全球导航卫星系统反射信号)海洋环境遥感探测系统,在天津渤海湾特定区域进行了3次机载校飞试验,获得了大量有效GNSS-R信号数据,对自然条件下的海面有效波高进行了反演处理。该系统通过对接收的GNSS直达信号和海面反射信号进行相关运算处理,可以获得DDM(Delay-Doppler Mapping,时延—多普勒映射)图谱,再利用DCF(Derivative of the Correlation Function,相关函数的导数)在DDM图谱基础上进行相关功率波形的计算,进而通过计算DCF的函数波形宽度得到海面有效波高,验证了该方法的可行性。该方法具有全天时、全天候、高分辨率、低成本等优点,对全球范围内中小尺度海洋状态和物理现象的监测具有重要意义。