宽高比及表面粗糙度对矩形微尺度通道流动特性的影响

实验研究了不同宽高比矩形金属微尺度通道的流动特性,并与硅通道对比来探究表面粗糙度的影响。金属微尺度通道宽为0.4mm,通道宽高比分别为0.50、0.67、和1.00,相对表面粗糙度范围为0.1609%~0.2145%。硅通道宽度及高度都为0.4mm,相对表面粗糙度为0.00325%。实验工质为空气,实验的雷诺数范围是250~3000。实验结果表明:在粗糙微尺度通道会发生转捩提前,并且转捩雷诺数随着宽高比增大而减小。在层流区,微尺度矩形通道摩擦因数随着雷诺数增大而减小,在转捩区出现明显增大后再减小。表面粗糙度很小时,未发现转捩提前现象。      

浅谈波音737NG飞机APU滑油系统一项监控指标在故障监控中的应用

波音737NG飞机APU故障影响航班运行,而APU滑油系统是其安全运行的重要保障,大多数APU的故障都能够从滑油系统的监控指标中找到故障征兆。本文基于737NG飞机APU滑油系统工作原理,提出了一项APU滑油系统的监控指标——温升速率,并利用该指标总结排故方法进行重点故障的监控,有效地提高了排故效率。     

基于雷诺平均Navier-Stokes方程的表面传热系数计算

采用有限体积法数值求解控制二维绕流的雷诺平均Navier-Stokes(RANS)方程组,计算了光滑和粗糙NACA0012翼型以及圆柱表面的局部表面传热系数.分析了近壁面网格间距、湍流模式和表面粗糙度模型对数值计算结果的影响.结果表明:切应力输运(SST)湍流模型能够区分层流和湍流边界层的对流传热特性,并能预测转捩的发生;采用Spalart-Allmaras(S-A) 扩展模型能够计算粗糙壁面的对流传热系数,但采用忽略转捩函数的S-A模型不能有效计算层流边界层的传热系数.当近壁面网格间距接近10-5量级的黏性子层时,在光滑和粗糙壁面都能得到准确的传热系数分布.结合合适的近壁面网格间距,湍流模式和表面粗糙度模型可以得到与实验数据十分接近的表面传热系数曲线.通过与求解不可压缩RANS方程得到的结果比较后发现,不可压缩RANS方程主要忽略了压缩和黏性耗散效应,这种效应可以通过绝热升温项的形式并入总体热分析.      

辐射带高能电子通量波动与地磁暴警报

地球磁场捕获带电粒子形成辐射带,地磁场的扰动将导致带电粒子通量的变化.根据磁暴期间外辐射带高能电子通量起伏和波动的特点及规律,利用GOES卫星实时发布的5min分辨率高能电子微分通量数据,构建了高能电子通量波动指数,并分析了该指数与地磁活动的关系.结果表明,所提出的高能电子通量波动指数与地磁事件有很好的相关性,能起到地磁暴发生的指示剂作用,相对于目前空间环境业务化预报过程中广泛使用的3hKp指数,高能电子通量波动指数能更早地警报地磁暴的发生,是潜在有效的地磁暴警报辅助手段,能为空间环境预报中的地磁暴实时警报提供重要参考.      

PREDICTION OF SURFACE ROUGHNESS FOR END MILLING TITANIUM ALLOY USING MODIFIED PARTICLE SWARM OPTIMIZATION LS-SVM

It is difficult to construct the prediction model for titanium alloy through analyzing the formation mecha- nism of surface roughness due to the complicated relation between influential factors and surface roughness. A no- vel algorithm based on the modified particle swarm optimization （PSO） least square support vector machine （LS- SVM） is proposed to predict the roughness of the end milling titanium alloys. According to Taguchi method and features in milling titanium alloys, the influences of cutting speed, feed rate and axial depth of cut on surface roughness are investigated with the analysis of variance （ANOVA） of the experimental data. The research results show that the construction speed of the modified PSO LS-SVM model is two orders of magnitude faster than that of back propagation（BP） model. Moreover, the prediction accuracy is about one order of magnitude higher than that of BP model. The modified PSO LS-SVM prediction model can explain the influences of cutting speed, feed rate and axial depth of cut on the surface roughness of titanium alloys. Either a higher cutting speed, a lower feed rate or a smaller axial depth of cut can lead to the decrease of surface roughness.     

样本重复使用失效响应曲线分析结构可靠度方法

用基于样本重复使用失效响应曲线逼近法,为充分利用迭代过程中的样本点,提出了样本重复使用的思想,并由此发展出一种结构可靠度的计算方法.利用可靠度指标作为收敛条件,从迭代收敛后的所有样本点中选取靠近失效界线处的样本点构造失效曲线响应函数,最后通过蒙特卡洛抽样的方法计算可靠度.多个算例表明:该响应函数避免了对传统意义上的功能函数响应面的模拟,降低了模型维数,又由于适当地 引入了带交叉项、具有曲线旋转功能的响应函数,因此能够很好地逼近失效曲线,有效地提高可靠度计算精度.      

A Prediction Method for△f0F2min of a Single Station From Interplanetary Parameters Based on Statistical Study

Using 86 CME-interplanetary shock events,the correlation between the peak values of （a） the solar wind parameters(B_z,E_y,P_dyn) and the geomagnetic indices（SYM-H,ASY-H,Kp）, （b） the coupling functions（Borovsky,Akasofu,Newell） and the geomagnetic indices,（c） the solar wind parameters/coupling functions/geomagnetic indices and the ionospheric parameter(Δf₀F_2min), are investigated.The statistical results show that in group（a）,B_{z min} and SYM-H_min have the best correlation,that in group（b）,the best correlation is between the peak values of Akasofu function (A_min) and SYM-H_min,and that in group（c）,the best correlation is between K_pmax andΔf₀F_2min. Based on the statistical results,a method for predicting f₀F₂ of a single station is attempted to be set up.The input is modified B_{z min} and the outputs are SYM-H_min andΔf₀F_2min.Then 25 CME-IPS events that caused geomagnetic storms in 1998 and 2009 are used to check the prediction method. The results show that our method can be used to predict SYM-H_min andΔf₀F_2min.     

A new spectral index to detect Poaceae grass abundance in Mongolian grasslands

The objectives of the present study were to develop a new index based on remotely-sensed data for detecting the abundance of grasses in the family Poaceae, which has a high palatability for livestock in Mongolia, and to map the distribution of these grasses in the semi-arid Mongolian steppes. We measured ground-based spectral reflectance of pure plant leaves – including Poaceae grasses – and soils, as well as in-situ in the Mongolian grasslands. The hyper-spectral data, taken by a spectroradiometer, were converted into four multi-spectral bands (i.e., blue, green, red, and NIR) to simulate satellite-based imagery data. In order to magnify the characteristics of the spectral signal of Poaceae, NGBDI (Normalized Green-Blue Difference Index), NGRDI (Normalized Green-Red Difference Index), NDVI (Normalized Difference Vegetation Index), NNBDI (Normalized NIR-Blue Difference Index) were calculated from the four multi-spectral reflectance values. Poaceae Abundance Index (PAI) was derived by combining these four normalized difference indices. PAI was found out to be a good indicator to discriminate Poaceae grass from the other plant spectral data.     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

激光冲击强化提高主动连杆振动疲劳性能

针对某型发动机放气活门主动连杆转接R处的疲劳断裂问题,进行了主动连杆激光冲击强化工艺研究;完成了原型件和激光冲击强化、喷丸及加大R3种处理工艺后主动连杆振动疲劳对比试验.结果表明,在317MPa的应力水平下,激光冲击强化、喷丸和加大R后主动连杆疲劳寿命分别为原型件的5.24倍、3.89倍及1.36倍;与其它2种工艺相比,激光冲击强化具有强化效果好、工艺稳定性高、易于实现等优点,是截至目前减少主动连杆疲劳断裂故障的最佳处理工艺.主动连杆激光冲击强化后表面粗糙度较小,产生深度约1.4mm的高数值残余压应力层,表层晶粒细化至纳米晶并伴随高密度位错.三者共同作用可以有效缓解转接R处的应力集中,抑制疲劳裂纹在转接R处的萌生和扩展,是主动连杆振动疲劳寿命提高的主要原因.