Adaptive feedback control of stability in an axial compressor with circumferential inlet distortion

The adaptive feedback control of stability with circumferential inlet distortion has been experimentally investigated in a low-speed, axial compressor. The flat-baffles with different span heights are used to simulate different distorted inflow cases. Compared with auto-correlation and root-mean-square analysis, cross-correlation analysis used to predict early stall warning does not depend on the distortion position. Hence, the cross-correlation coefficient was used to monitor the stable status of the compressor and provide the feedback signal in the active control strategy when suffering from different distortions. Based on the stall margin improvement of tip air injection obtained under different distorted inflow cases and the sensitivity analysis of cross-correlation coefficients to injected momentum ratios, tip air injection was adopted as the actuator for adaptive feedback control. The digital signal processing controller was designed and applied to achieve adaptive feedback control in distorted inflow conditions. The results show that the adaptive feedback control of air injection nearly achieves the same stall margin improvement as steady air injection under different distortion intensities with a reduced injection mass flow. Thus, the proposed adaptive feedback control method is ideal for the engine operation with circumferential distorted inflow, which frequently occurs in flight.     

A numerical study of segmented cooling-stream injection in supersonic film cooling

The present study proposes a segmented cooling-stream injection structure based on a certain coolant mass flow rate, and numerically investigates the effect of segmented cooling-stream injection on supersonic film cooling. The results indicate that without shock-wave impingement and with helium as the coolant, segmented cooling-stream injection can reduce the mixing between the mainstream and the cooling stream to produce better cooling performance than single injection, especially at larger coo...     

低反力度跨声速转子的叶顶喷气扩稳数值研究

为进一步提高低反力度压气机的稳定工作范围，以某三级低反力度高负荷压气机首级跨声速转子为研究对象，借助三维数值模拟方法，进行了叶顶喷气扩稳研究，分析讨论了叶顶喷气提升低反力度压气机转子稳定性的机理，并探讨了不同喷气轴向位置对扩稳效果及气动性能的影响。结果表明：叶顶喷气通过削弱叶顶泄漏涡和通道激波的相互作用，抑制了转子近失速工况下泄漏涡的破碎，消除了叶顶通道的大面积堵塞，拓宽了转子的稳定工作边界；随着喷嘴的位置从叶顶前缘处沿轴向上游移动，转子的失速裕度提升量呈现出先增大后减小的趋势，综合扩稳效果和对压气机总性能参数的影响，最佳喷气轴向位置为叶顶前缘上游转子5%叶顶轴向弦长处；叶顶喷气改变了转子气动参数的径向分布，降低了转子上15%叶高范围内的负荷，同时也使得其它叶高区域的负荷提升。