初级教练机综合航电系统发展趋势

分析和总结了综合航空电子系统的发展历史和现状,以及我国航电技术水平发展状态,阐述了当前初级教练机航电系统存在的问题。对国外军用初I中级教练机、国外民用轻型飞机和国产初级教练机现状进行了分析,论述了初级教练机综合航空电子系统的发展趋势。     

无人机气动力地面车载测试系统

介绍了中国航天空气动力技术研究院开发的一种用于测量全尺寸无人机气动力的地面车载测试系统（GTV）。车载测试系统采用一辆中型卡车进行相关改造,将试验无人机机身安装在其顶部,通过汽车牵引能够达到40km/h的速度。一套专用的测试天平系统和数据采集系统用于记录试验中无人机产生的升力、阻力以及俯仰力矩等数据。主要介绍测试天平系统的设计,数据采集测试系统,测试方法和试验结果。多元静态原位校准加载结果表明天平测试系统输出信号线性度以及重复性较好。动态校准试验采用一副定常展弦比6的机翼进行,试验结果与已知的风洞试验数据进行了比对。车载测试系统试验结果的升力和俯仰力矩数据不同车次之间重复性较好,并且与风洞试验数据基本一致。但阻力数据的离散度要比风洞试验时大得多,并且试验结果比风洞试验时偏小一些,试验证明地面车载测试系统的阻力测量难度较大。     

圆度误差的一种微机图像测量法

将圆度误差测量的影像法与最小二乘圆法相结合,利用多媒体图像处理技术,设计了一种圆度误差的微机自动测量系统,实现了非接触、远距离快速测量,提高了测量精确度,为某些特殊工件的测量提供了一套实用的测量方法。     

室温贮存对树脂粘度和加压点的影响

讨论了５４０５改性双马来酰亚胺树脂基体在室温下，贮存时间对粘度以及对固化过程中加压点的影响，给出了相应的计算方法。     

Stress corrosion behavior of 2195-T8 Al-Li alloy with an artificial pit exposed to a 30vol% HNO3 solution

This paper experimentally studied the stress corrosion behavior of 2195-T8 Al-Li alloys with prefabricated pits in 30vol% HNO₃. The microstructure was observed and determined by the scanning electron microscopy and the transmission electron microscopy. The typical corrosion features, i.e., regular or irregular corrosion pits and sub/intergranular corrosion, were investigated, and the role of stress were analyzed. The statistical results of the number and area of corrosion pits in various sizes were studied using an improved image processing method. Experimental results demonstrate that stress affects the intergranular corrosion or sub-intergranular corrosion of the alloy most, and promotes them to evolve into cracks under stress corrosion. Stress also plays a role in accelerating corrosion severity of certain corrosion feature. The number of corrosion pits with an area of 0–50 μm² can be seen as an index to reflect the degree of corrosion. Besides, a corrosion phenomenon, i.e., the pit bottom in the site with the maximum stress locally suffering from no severe corrosion, was observed and discussed.     

顾及频间偏差的GNSS多频非组合PPP变形监测

精密单点定位(PPP)技术有望解决长距离、大范围等监测场景难以找到稳定基准点的难题。现代化的全球卫星导航系统(GNSS)卫星纷纷开始播发多频信号,多频观测值融合理论上可提升PPP变形监测性能。为了充分利用多频冗余观测数据,详细研究了每个频点的差分码偏差(DCB)和全球定位系统(GPS)存在的相位频率间卫星钟偏差(PIFCB)的改正方法,扩展了多频数据处理的严密理论模型,能够灵活处理GPS三频、Galileo五频和BDS-3五频观测数据。多频PPP振动监测实验结果表明,GPS三频PPP、BDS-3五频PPP、Galileo五频PPP较各自双频PPP位移监测精度可分别提升12%、13%和14%,表明多频PPP技术有利于提升PPP位移监测精度与稳定性。     

CMOS星敏感器图像驱动及实时星点定位算法

利用CMOS图像传感器技术的低功耗和开发简单等优点,设计了新型CMOS星敏感器的图像采集驱动电路.该电路设计以现场可编程门阵列(FPGA)为核心,配以静态存储器和并口通讯功能,实现了图像的采集、存储和输出.同时根据4连通域图像分割的原理,在FPGA内部设计了一个数字电路模块,以实现该星敏感器的实时星点定位功能.该模块由于采用了流水线结构,可以和图像采集同步完成星点质心定位算法,减少了向星敏感器数据处理单元中的精简指令集计算机(RISC)的数据传输量和RISC进行星图跟踪和识别的工作量,提高了星敏感器的总体工作性能.对比软件处理结果,对星敏感器的图像采集和质心算法硬件电路进行了验证.     

Advanced fractal approach for unsupervised classification of SAR images

Unsupervised classification of Synthetic Aperture Radar (SAR) images is the alternative approach when no or minimum apriori information about the image is available. Therefore, an attempt has been made to develop an unsupervised classification scheme for SAR images based on textural information in present paper. For extraction of textural features two properties are used viz. fractal dimension D and Moran’s I. Using these indices an algorithm is proposed for contextual classification of SAR images. The novelty of the algorithm is that it implements the textural information available in SAR image with the help of two texture measures viz. D and I. For estimation of D, the Two Dimensional Variation Method (2DVM) has been revised and implemented whose performance is compared with another method, i.e., Triangular Prism Surface Area Method (TPSAM). It is also necessary to check the classification accuracy for various window sizes and optimize the window size for best classification. This exercise has been carried out to know the effect of window size on classification accuracy. The algorithm is applied on four SAR images of Hardwar region, India and classification accuracy has been computed. A comparison of the proposed algorithm using both fractal dimension estimation methods with the K-Means algorithm is discussed. The maximum overall classification accuracy with K-Means comes to be 53.26% whereas overall classification accuracy with proposed algorithm is 66.16% for TPSAM and 61.26% for 2DVM.     

高分影像辅助下的航空高光谱严密几何检校方法

 惯性测量单元(IMU)与传感器视准轴的偏心角和偏心矢量是造成航空线阵列高光谱数据几何校正误差的主要原因之一。在分析偏心角与偏心矢量误差来源之后提出该误差由IMU主轴与传感器主轴的角度偏差、测区固定偏差、GPS中心与传感器投影中心相对偏差组成,在此基础上建立了较为严密的检校模型。针对模型解算时需要大量高精度控制点的问题,提出了一种高分影像辅助下的亚像元精度控制点自动提取方法。通过多地区、多传感器高光谱航测实验表明,亚像元精度控制点能有效提高模型解算精度。新检校模型可获得亚像元校正精度,推扫式传感器——应用型机载成像光谱仪(AISA)建模中误差约为0.39个像元,摆扫式传感器——实用型模块化成像光谱仪(OMIS)建模中误差约为0.23个像元,校正后的影像可直接进行拼接。     

改进层次聚类法在复合材料敲击检测中的应用

伴随复合材料的迅速发展,其在航空航天方面的应用也日益普遍,但因复合材料的各向异性,在制造过程中会导致某些缺陷的产生。敲击检测作为一种实时原位的无损检测,在复合材料的检测中效果明显。由于敲击检测尚未找到合理的数据处理方法,所以其应用范围受到限制。从解决敲击检测数据处理方法的角度出发,提出将改进层次聚类法应用于敲击检测中,并在应用实例环节对该方法进行了应用,通过实验结果对比,表明改进层次聚类方法可以解决敲击检测数据处理的问题。