Through-thickness heterogeneity in creep properties of friction stir welding 7B50-T7451 aluminum alloy thick plate joint: Experiments and modeling

Through-thickness heterogeneity in creep properties of 7B50-T7451 aluminum alloy Friction Stir Welding(FSW) joints was investigated. Creep tests for three slices of the FSW joint were conducted at the temperature of 150–200 °C and applied stress of 60–225 MPa. The theta projection method was used to predict creep curves and minimum creep rate. The results show that the minimum creep rate increases and creep rupture life decreases with the increase of creep temperature and applied stress. Creep p...     

Hot Tearing Behavior of Mg-Gd-Y-X Alloys

Mg-Gd-Y-Zr alloy castings are widely used in the aerospace field owing to their high strength and excellent creep resistance. The castability of these alloys is also an important consideration for engineering application. Thus， the hot tearing susceptibilities (HTSs) of Mg-10Gd-1Y-1Zn-0.5Zr (VW91) alloy and Mg-10Gd-2Y-1Zn-0.5Zr (VW92) alloy are investigated with a constrained rod casting (CRC) mold. The microstructures and fracture surface are characterized by optical microscope and scanning electron microscope. The results unveil that the HTS of VW92 alloy is lower than that of VW91 alloy. The microstructures indicate that obvious tears can be observed in VW91 alloy， while the tears in VW92 alloy are tiny. The tear feeding and healing by eutectic are also observed in VW91 and VW92 alloys. Therefore， the lower hot tearing susceptibility of VW92 alloy is mainly attributed to the high amount of eutectic which feeds and heals tears. Besides， the effects of the coefficient of thermal expansion (CTE) and the fluidity of VW91 and VW92 alloys on their HTSs are discussed.     

推进剂管理装置的可靠性增长及试验验证

采用原始的焊接方式焊接筛网式推进剂管理装置的收集器合格率低、可靠性差。为此,采用纯钛箔作为过渡层进行了不锈钢筛网与钛合金支压板的电阻缝焊试验以及随后这两者与钛合金骨架的电子束焊试验,然后进行了地面力学环境下的振动试验,以验证焊接方式改进后收集器的可靠性。焊接试验结果表明,纯钛箔过渡层一方面可以大幅降低筛网在电阻缝焊时的焊接热量,有效地减小筛网的热变形;另一方面可以在电阻缝焊后形成牢固、封闭的纯钛/不锈钢筛网焊缝过渡区,有效地增加电子束焊时筛网的变形抗力,从而使得焊接后试样的合格率和性能大幅提高。振动试验结果表明,焊接方式改进后收集器的可靠度置信下限从0.90增加到了0.96。     

Microstructure and Hot Deformation Behavior of Mg-9Al-3Si-0.375Sr-0.78Y Alloy

Using Gleeble-3500 thermal simulator， the high temperature plastic deformation behavior and microstructure evolution of Mg-9Al-3Si-0.375Sr-0.78Y alloy are investigated at the temperature of 523 K?673 K and the strain rate of 10-3 s-1?10 s-1. True strain-true stress curves show the characteristics of the typical dynamically recrystallization process. The Arrhenius constitutive equation of the hyperbolic model is established. The average activation energy and the strain rate sensitivity index are， respectively， 221.578 kJ.mol-1 and 0.137. The result shows that the α-Mg phase exhibits dynamic recrystallization (DRX) characteristics obviously. But no DRX occurs in theβ-Mg17Al12 phase. Hot deformation does not affect the primary Mg2Si phase. Under the conditions of low temperature (523 K?673 K) and high strain rate (1 s-1?10 s-1)， the flow instability and macro-defects such as crack appear in the specimens. However， there are finer recrystallization grains. Under the conditions of high temperature (≥673 K) or low strain rate， the microstructure of the alloy shows good homogeneity. The size of the primary Mg2Si phase is uniform， the size of the β-Mg17Al12 phase is small， and the distribution of the β-Mg17Al12 phase is uniform.