钛合金蜂窝三层结构的扩散焊接研究

介绍了俄罗斯钛合金蜂窝三层结构扩散焊接的研究成果.详细介绍了铝合金、焊接规范选择、接头应力变形状态的分析、模拟计算等,有助于国内钛合金的焊接研究.     

37mm冲压加速器热发射试验初步结果

气动中心超高速所自行研制成国内第一座冲压加速器，并成功地实现了弹丸的冲压加速。文中首先给出冲压加速器的工作原理、国内外研究现状，以及３７ｍ ｍ 口径冲压加速器系统组成，最后给出了热发射不起动（ｕｎｓｔａｒｔ）和热发射实现冲压加速的初步结果     

浅谈焊接的分类

探讨了焊接方法分类的原则,使用的范围.分析了焊接的能源与它们之间的关系,对焊接运用的条件,焊接的目的进行了分类和定义.     

SA-335P122材料管道焊接工艺研究

通过对1000MW超超临界锅炉四级过热器出口集箱和主蒸汽管道进行试验研究,发现锅炉管道存在环缝焊接式样不合格的问题.通过对管道SA-335P122材料进行力学性能分析,并结合试验数据,提出了新的工艺流程,采用了新的焊接材料和焊接工艺,通过试验验证了焊接流程的合理性,使产品制造一次合格.     

Special Technologies Related to Electron Beam Welding

In order to improve the manufacturing quality of electron beam welding,some technologies are developed by using the special features of electron beam.Comparing with the conventional electron beam welding,the usage of multi-beam technology and micro-beam technology are introduced.In addition.the development of beam diagnostic system is also presented.     

直升机薄壁管梁加工技术研究

在直升机设计制造过程中，薄壁长管梁的焊接、机加一直是比较棘手的问题。就某型号直升机薄壁长管梁的焊接、机加问题，从工艺方案设计、工艺参数选择、定位装夹方法等几个方面来寻求解决途径，保证薄壁长管梁的加工精度。     

Numerical investigation on flow field characteristics of dual synthetic cold/hot jets using POD and DMD methods

In order to improve the control ability of synthetic jets in compressible boundary layer, a novel control method based on dual synthetic cold/hot jets coupled control of velocity profile and temperature profile was proposed. As fundamental investigations on the effects of synthetic jet temperature on the jet behavior and flow field characteristics were essentially necessary, preliminary numerical simulations were conducted to study the influence of temperature (200 K and 400 K) on the flow field characteristics of synthetic jets using Large Eddy Simulations (LES) model. Time-averaged flow fields showed that different temperatures led to variable behavior of two strands of jets. For dual synthetic cold jets, a potential-core arose apparently with its height ranging from 0.01 to 0.03 m, while for dual synthetic hot jets, two strands of jets emerged downstream. The modal decomposition of instantaneous flow fields had been done using both Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD). Various modes showed different characteristics of the flow fields. As the POD method focuses on the energy of flow while the DMD method focuses on the frequency, the first two modes had many similarities, but the third and fourth modes demonstrated completely different vortex structures. The current researches play a role of preliminary investigations for further and comprehensive exploration of novel flow control measures in global velocity field.     

Ni18%和0Cr15Ni5Cu2Ti异种钢材电子束焊接工艺试验研究

对Ni18%和0Cr15Ni5Cu2Ti超高强度马氏体沉淀硬化不锈钢异种钢材之间进行了电子束焊接工艺试验,就其工艺可焊性及接头性能、金相组织、焊缝质量、力学性能等开展研究,采用X-探伤、静载强度、金相观察、电镜扫描和能谱分析等检测手段对试件进行了分析并得出了相应结论。     

MGH956合金钎焊接头力学性能分析

以MGH956合金钎焊接头高温抗拉强度为考察对象进行了正交试验设计。结果表明,考察的3个因素对接头性能影响的主次顺序为:钎料成分﹥保温方式﹥焊缝间隙;对应较优工艺参数为:钎料为KCo3,保温方式为:1240℃/10min加1000℃/30min;焊缝间隙为0.02mm。在所进行试验中,1000℃拉伸试验结果最好的焊缝强度接近了母材水平。     

激光脉冲圈焊工艺研究与应用

基于有限元软件MSC.MARC软件平台Hypermesh软件模块仿真模拟了激光连续圈焊和激光脉冲圈焊的温度场分布,模拟结果表明:激光脉冲圈焊可有效控制被焊工件温度场分布,焊接热影响区小,为此采用激光脉冲圈焊工艺焊接簧片式电磁阀簧片组件.研究了激光焊接频率与焊点重叠率以及激光焊接速度与焊缝强度和焊点重叠率之间的关系,从而得出了激光脉冲圈焊焊接工艺规范,即激光峰值功率Pf--300 W,激光基值功率Pj=200 W,激光焊接速度v=3.33 mm/s,激光频率f=20 Hz等,采用该焊接规范焊接完成的簧片式电磁阀已经应用于嫦娥五号探测器推进分系统、轨道器子系统以及上升器推进子系统的液体动力装置之中,并已经完成了飞行和月球探测任务.