Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

均匀各向同性大气湍流对声爆传播特性的影响

基于离散Fourier模态有限和生成的随机大气湍流场，采用修正波形参数方法，开展了均匀各向同性大气湍流对典型超声速客机声爆传播特性的影响分析。计算采用的超声速客机模型为自行生成的简化超声速公务机模型。首先，应用航空工业空气动力研究院自主研制的CFD软件ARI_Overset在三维空间求解Navier-Stokes方程，得到作为声爆远场传播初始值的近场空间压力分布；其次，基于Von Karman能量谱，采用离散Fourier模态有限和形式生成随机均匀各向同性大气湍流场；最后，采用修正波形参数方法模拟了声爆信号在随机速度湍流场中的传播过程。数值结果表明：各向同性大气湍流对于地面声爆特征有重要影响。与无湍流状态相比，均匀各向同性大气湍流使得地面声爆特征增强的概率约为55%，使得地面声爆特征减弱的概率约为45%，故总体而言大气湍流效应更倾向于增强地面声爆特征；均匀各向同性大气湍流对于声爆传播路径影响相对较小，但是这一变化仍会导致地面信号接收点的不确定性。     

Real-time object tracking via least squares transformation in spatial and Fourier domains for unmanned aerial vehicles

This paper addresses the problem of real-time object tracking for unmanned aerial vehicles. We consider the task of object tracking as a classification problem. Training a good classifier always needs a huge number of samples, which is always time-consuming and not suitable for realtime applications. In this paper, we transform the large-scale least-squares problem in the spatial domain to a series of small-scale least-squares problems with constraints in the Fourier domain using the correlation filter technique. Then, this problem is efficiently solved by two stages. In the first stage, a fast method based on recursive least squares is used to solve the correlation filter problem without constraints in the Fourier domain. In the second stage, a weight matrix is constructed to prune the solution attained in the first stage to approach the constraints in the spatial domain. Then, the pruned classifier is used for tracking. To evaluate proposed tracker's performance, comprehensive experiments are conducted on challenging aerial sequences in the UAV123 dataset. Experimental results demonstrate that proposed approach achieves a state-ofthe-art tracking performance in aerial sequences and operates at a mean speed of beyond 40 frames/s. For further analysis of proposed tracker's robustness, extensive experiments are also performed on recent benchmarks OTB50, OTB100, and VOT2016.     

用于复杂形状复合材料制造的水溶性芯模材料

提出了一种能够用于树脂基复合材料成型用的水溶性型芯模材料,该材料既能满足树脂基复合材料成型时的温度要求,又能在复合材料成型完成后进行水溶脱除.主要研究了水溶性型芯模材料的组成、制备工艺与耐温性、易脱除等相关性能,并对水溶性芯模材料的水溶性作了评价和表征.     

液氧/煤油补燃发动机低频频率特性研究

基于模块化层次化的建模技术,建立液氧/煤油补燃发动机的线性小扰动频率特性仿真模型.在建模过程中,重点考虑了绝热流动假设和熵波影响下的气路模型.依据交流流体网络理论,运用传递函数法分析了该型发动机的低频频率特性,为研究液体火箭的纵向耦合振动(POGO)及发动机动力学提供帮助.      

基于局部三角变换的OFDM系统

正交频分复用(OFDM)调制技术由于具有良好的抗多径干扰能力和高效的频谱利用率,在许多数字传输系统中被广泛应用,成为当今卫星通信研究的热点。本文提出了基于局部三角变换（LTT）的OFDM系统模型,该系统带外频率谱密度下降快,并能保持相邻的OFDM符号的正交性。给出了用离散余弦变换（DCT）实现的快速算法及复杂度,并考查了最优基的选取。仿真和分析结果表明：该系统误码率比基于快速傅里叶变换（FFT）的系统更小,能更好地适应高速传输带来的大多普勒频移,更有效地利用带宽,为接收端对高速数据的解调提供很好的保证。     

纤维复合材料刚度设计的力学原理及其应用

针对航空用纤维复合材料,基于纤维与基体的协调变形规律和材料应变能密度的计算,导出了纤维复合材料的刚度表达式,研究了刚度矩阵的基本力学特性,给出了复合材料刚度矩阵元素与基体材料的刚度、纤维束的刚度及铺设方向的关系,提供了平面铺层和三维取向纤维复合材料的基本刚度设计公式和设计方法。最后给出工程应用设计方法的几个具体例子,并与其他理论和实验结果进行了对比。研究结果表明,在考虑材料制备工艺缺陷造成的刚度折减后,本文提出的设计公式及方法可应用于纤维复合材料的优化设计。     

新型星载多波束相控阵天线分布式数字波束成形网络设计与实现

 针对16波束61阵元数字波束成形（DBF）星载相控阵天线的高速信号处理要求,提出以实信号处理为主体的分布式DBF网络架构,较复信号处理模式节省了一半的资源和数据传输量。通过时域Hilbert变换和分布式算法对波束成形网络各单元进行合理设计,降低了算法的运算量,也减少了硬件资源开销;同时通过单音闭环校正回路设计,改善了射频通道一致性。研制了DBF网络硬件平台和半实物仿真系统,验证了算法设计的正确性。本文提出的算法对资源有限的阵列信号处理有一定的借鉴意义。     

基于遗传算法的产品拆卸序列规划研究

拆卸序列规划(Disassembly Sequence Planning,DSP)是民用飞机维修规划的一个重要内容,也是在设计阶段对民用飞机产品维修性的一个评估.为了能以较高的效率求解出产品拆卸序列的方案,本文首先根据拆卸特点构建了产品拆卸混合图模型.该模型描述了零部件之间的连接关系和优先关系,然后通过分析产生产品的拆卸序列.在此基础上建立目标函数并利用遗传算法的计算速度和灵活性的特点对拆卸序列进行优化.最后,通过一个实例,验证了本文方法的可行性及其计算效率.     

一种小波变换像空间的再生核

利用一个常用的调制高斯函数作为小波母函数,得到小波变换像空间的再生核函数的具体表达式和小波变换的等距恒等式,并分析了小波变换像空间的结构,为一般的小波变换的像空间的研究提供了理论基础。