高精度高速走丝线切割机床大锥度机构的实现

设计了一种具有导丝器机构的高精度高速走丝线切割大锥度线架结构,以期提高高速走丝电火花线切割大锥度切割及多次切割精度。     

超声马达工作性能影响因素的研究

系统阐述在超声马达的设计、制作过程中的机构设计、制作工艺、驱动电源等方面的关键问题。重点讨论超声振子的粘接技术,振子参数优化设计的方法,以及驱动电源的匹配和频率自动跟踪设计,最终设计出高性能的超声马达。     

应用于控制力矩陀螺电源模块的线性-非线性协同控制器设计

对控制力矩陀螺电源的控制器进行研究,基于对线性控制器及非线性控制器的分析,设计了线性-非线性协同控制器并搭建硬件模型,在电源系统动态调整阶段采用非线性控制器,在稳态阶段采用线性控制器。该方案较单一线性控制器提升了电源系统的动态性能,并保证了系统的稳定性及可靠性。对该鲁棒控制器进行了仿真分析并搭建实物,通过实验验证了相较线性控制器,使用协同控制器的电源模块在控制状态切换时,下冲量与调节时间分别减少了45%及58%,证明了该协同控制器能够有效提升CMG电源系统的动态性能。     

用于空间站的四重冗余对接控制系统设计

针对空间站所处太空环境的特殊性、对接机构对空间站正常运行的重要性,以及对航天器可靠性要求日益增加的问题,提出在对接控制系统中增加可靠性设计,实现整个机构的高质量、平稳运转。在完成正常控制功能的基础上,在系统中采用了四重冗余的工作机制,包括主备机双热备份、自动/手动控制模式切换、自动控制关闭指令双线发送和工作模式的三取二判断,对四重冗余设计的具体判断流程进行了详细的解释。对控制系统软件进行仿真验证,结果表明：本方法设计的对接控制系统具有高可靠性和故障容错能力。     

基于仿生的大展弦比直机翼结构布局形式研究

为了探讨大展弦比直机翼的结构布局形式,借鉴自然界中的鱼骨和鸟羽毛以及树叶的叶脉形式,利用有限元分析与满应力优化作为设计手段,对三种不同的结构布局形式(A构型、B构型和常规构型)开展基于强度、刚度以及重量条件限制下的有关响应的对比研究.计算结果表明:在不同尺度的等重量条件限制下,"A构型"弯曲刚度最大,扭转刚度居中;"B构型"弯曲刚度居中,扭转刚度最小;"常规构型"弯曲刚度最小,扭转刚度最大.分析得出机翼的翼肋布置应该"适当的"倾斜.最后给出三点结论.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

机电作动系统发展

 机电作动系统是通过控制电动机或电器的运行直接或间接地控制负载的运动,实现控制目标的位置伺服控制的一类系统的总称。针对飞行器用机电作动系统,概述了其应用概况、结构的演化过程、关键技术的发展过程,并就机电作动系统的发展动态做了介绍。在此基础上,提出了飞行器用机电作动系统的研究和发展的一些建议。     

高速旋转部件在载人航天器热控系统中的应用

文章阐述了高速旋转部件在载人航天器热控系统中的应用现状,提出了增长部件寿命、改进系统可靠性的建议并介绍了磁悬浮技术。     

一种快速响应型小卫星的自主任务规划设计与应用

浦江一号卫星是由上海航天技术研究院研制的一颗快速响应型小卫星,于2015年9月成功发射,卫星质量347 kg,运行在高度481 km的太阳同步轨道。为高效、高精度识别定位地面大范围广泛而随机分布的电磁辐射目标,浦江一号卫星提出了基于单星电磁信号监测载荷与光学成像载荷综合应用的在轨自主任务规划方案。在轨应用表明:该设计解决了电磁信号监测与光学成像高效协同难题,实现了星上自主任务规划时间快于0.10 s,引导指向精度优于0.10°,单次任务连续引导目标数量多于10个,为后续多手段遥感卫星的综合应用及在轨自主任务规划设计提供借鉴。