快速阀门同步控制系统

本文阐述了自在由飞弹道靶试验中,利用微波相干原理,取得模型运动的起步信号,经过与模型运动速度相对应的延时后,去触发控制电路,引爆阀体内的电雷管,控制阀门的开启和关闭的同步控制系统。     

Injection of 40-kHz-modulated electron beam from the satellite: II. Excitation of electrostatic and whistler waves

Beam-plasma interaction effects are studied during the active space experiment with electron and Xe-ion beam injections in an ionospheric plasma. Permanent 40-kHz-modulated electron beam injection occurs simultaneously with a xenon-ion beam injected by the Hall-type plasma thruster operating in a square-pulse mode (100/50 s for a job/pause duration). The unusual behavior of the background charged particle fluxes and wave activity stimulated during the beam-plasma interaction have been registered by the scientific instruments onboard Intercosmos-25 station (IK-25) and Magion-3 subsatellite. The longitudinal and electromagnetic wave instabilities and their mutual relationship are considered in order to explain the observed effects. The excitation of electrostatic waves by the electron injection has been considered for different resonance conditions near the linear stability boundary. Beam-driven electromagnetic instability is responsible for the backward-propagating whistler waves excited via cyclotron resonance. Competition of these two beam instabilities is one of the subjects of the present study.     

Analysis of the data processing strategies of spherical harmonic expansion model on global ionosphere mapping for moderate solar activity

Spherical harmonic (SH) expansion is widely used to model the global ionosphere map (GIM) of vertical total electron content (VTEC). According to the impact of different data processing methods of the SH expansion model on the VTEC maps, we specifically performed comprehensive analysis in terms of the data sampling rate, the time resolution, the spherical harmonic degree, and the relative constraint. One month of GPS data (January in 2016) from the International GNSS (Global Navigation Satellite System) Service (IGS) network in a moderate ionospheric activity period at the descending phase of Solar Cycle 24 was processed. To improve the computational efficiency of the daily GIM generation, the data sampling rate of 5?min was recommended allowing the GIM precision loss within 0.10 TECU (total electron content unit). The global VTEC map could be better represented in temporal and spatial domains with higher time resolution and higher spherical harmonic degree, especially at low latitude bands and in the southern hemisphere. The GIM precision improvement was about 10.91% for 1-h and about 15.15% for 0.5-h compared with the commonly used 2-h time resolution. The use of spherical harmonic degree 17 or 20 instead of 15 could improve the precision by 3.19% or 6.06%. We also found that an optimal relative constraint had to be found experimentally considering both the GIM precision and the GIM root mean square (RMS) map.     

电传系统的谐波振荡

从舵回路非线性特性的研究入手,通过频谱分析和实验验证,揭示了高增益电传系统中三角波的高频奇次谐波激发舵面抖振的物理本质,并给出电传系统谐波振荡的必要条件、抖振的频率特征以及防排措施,对现代飞行控制系统的设计具有重要参考作用。     

裂纹转子非线性振动特征的谐波小波与分形识别

通过对谐波小波的分析研究,指出了谐波小波对振动信号局部频段分析的优良特性。采用谐波小波对裂纹转子的非线性振动信号在低频段进行了分析。理论分析与实验结果表明:对实际裂纹转子信号,经谐波小波的频段分析后,能够得到通常难以由理论分析与实验结果获得的非整数倍周期分叉的非线性特征频谱。计算了裂纹转子的分形维数,发现裂纹转子的振动信号比理论结果要复杂、可以用多重分形作为判断实际转子是否有裂纹的一个特征。提出了用谐波小波变换后的奇异谱来识别裂纹转子非整数倍周期分叉的非线性特征频谱的方法,并对实际转子信号进行分析,得到了明显的非整数倍周期分叉的奇异谱。      

利用经验正交函数分解的大气密度模式校准方法

热层大气密度产生的阻力是作用在低轨航天器上最大的非引力摄动,现有大气密度模式存在15%~20%的偏差,难以满足空间任务应用需要。采用NRLMSISE-00模式作为密度参考标准,通过修正Jacchia-Roberts经验大气模式温度参数校准密度,建立温度修正量与密度的参数方程。针对部分区域修正量迭代计算发散问题,采用改进高斯牛顿迭代法求解方程。选择经验正交函数（EOF）分解方法分析修正量的时空特征,并与传统球谐（SH）分析的结果进行比较。结果表明,前4阶EOF基函数与前9项球谐基函数分别可提取温度修正量超过85%与80%的变化特征,EOF分解方法对温度修正量的表示效率高于球谐分析方法。第1阶EOF基函数反映了温度参数的整体偏差,第2~4阶EOF基函数对应的时间系数表明温度修正量的变化具有天周期性,且球谐分析得到的时间系数同样具有天周期性的特点。利用前4阶EOF基函数和前9项球谐基函数重构的温度修正量校准Jacchia-Roberts模式,校准后的模式密度偏差分别下降了9.06%与5.37%,表明EOF分解方法与传统球谐分析方法相比,能够更有效地修正温度参数,改进模式精度。     

电容均压三相四开关变换器预测功率控制

三相四开关变换器直流侧分离电容电压不平衡,将降低其并网电能质量,缩短电解电容寿命。针对该问题,提出了一种直流侧分离电容电压均衡的模型预测功率控制策略。基于αβ两相静止坐标系分析电压矢量,建立功率预测模型。由于直流侧电容中点电压偏差值含有交流分量和直流分量,使用低通滤波器提取直流分量后计算功率补偿值,并计入给定功率,进行模型预测功率控制,实现直流侧分离电容电压均衡。该控制策略无需锁相环和PWM调制,易于实现。通过仿真和试验对其动、静态特性进行分析,验证了所提出控制策略的有效性和可行性。     

Structural and collisional data for Mg III and Al IV

We present in this work energy levels, oscillator strengths, radiative decay rates and fine structure collision strengths for the Mg III and Al IV ions. The 11 configurations: (1s²) 2s²2p⁶, 2s²2p⁵3l, 2s2p⁶3l, 2s²2p⁵4l   (l?n-1$l?n-1$, where n is the principal quantum number), yielding the lowest 75 levels are used. The collisional data for these two ions are missing in the literature, especially the database CHIANTI, this is the principal motivation behind the present work. Calculations have been performed using the AUTOSTRUCTURE code. AUTOSTRUCTURE treats the scattering problem in the distorted wave approach. Fine structure collision strengths are calculated for a range of electron energies from 10 Ry to 240 Ry. The atomic structure data are compared to available experimental and theoretical results.     

基于有限元Craig缩聚模型的基础激励和载荷识别

载荷识别是用有限自由度的加速度测量值推断外力.基础激励是在基础自由度上加给定的加速度时间历程激振结构,求整个结构的动响应.利用Craig减缩模型的性质,及界面自由度的已知运动可求出整个结构其余自由度的动力学响应,完成基础激励求解.在此基础上用已知的界面自由运动和求得的非界面自由度的动力学响应,代入结构动力学方程即可实现载荷识别.本方法唯一能给基础激励和载荷识别结果带来的偏差是Craig缩聚模型与原始有限元模型间的差异,对此用频响分析的方式,直接从频响曲线的变化来确定缩聚模型的精度.算例表明这一新的基础激励和载荷识别途径是有效的.      

高温磁悬浮轴承励磁绕组制造技术

针对国内外高温励磁绕组存在的缺陷与不足,提出了一种新型的迷宫形励磁绕组结构,首先通过电火花线切割制造出单层迷宫形线圈,并在线圈匝间和层间充分均匀地填充耐高温绝缘材料;然后通过真空钎焊工艺实现多层迷宫形线圈的牢固焊接,最后将焊接成型的多层线圈封装成迷宫形绕组,并应用于单自由度高温磁悬浮轴承试验台中,实现了550℃被悬浮物体近20h的稳定悬浮.研究结果表明:线圈焊缝的高温电阻值小,抗剪切强度满足要求,焊缝的金相组织致密均匀;绕组匝间和层间绝缘性能良好;迷宫形励磁绕组在原理和工艺上是可行的.对高温悬浮试验后的迷宫形绕组内部形貌进行观察后发现封装线圈的高温绝缘材料存在一定的缺陷,有待进一步研究.