侵彻制导武器终端多约束最优制导律

针对侵彻型制导武器终端多约束制导问题,建立包含一阶弹体动力学的多约束制导模型,采用最优控制方法推导终端多约束制导问题的通解。根据终端约束与罚函数的关系,求解了实际工程中关心的3种最优制导律,并结合当前主流制导控制体制,在小角假设下,将其表述为便于工程实现的形式,即包含弹体动力学的最优比例导引制导律、弹道成型最优制导律和终端多约束最优制导律。理论分析和典型末制导条件仿真表明,后2种制导律可为侵彻制导武器终端位置与角度双约束以及位置、角度与加速度多约束制导问题提供理论基础和工程应用参考。     

铝合金弹丸超高速撞击玄武岩纤维布损伤分析

高强度、高模量纤维防护材料是航天器空间碎片超高速撞击防护结构材料的发展趋势之一。开展弹丸超高速撞击高强纤维材料时的损伤分析是空间碎片防护结构研究开发设计的重要环节。玄武岩纤维是近年来受到人们关注的一种高强度、高模量纤维。文章对铝合金弹丸超高速撞击玄武岩纤维布的损伤特性进行了分析研究,观察到了弹丸前部的损伤形态。根据试验结果拟合得到了铝合金弹丸后部产生初始破坏的临界破碎速度方程。分析表明:在试验范围内,铝合金弹丸撞击玄武岩纤维布的临界破碎速度低于撞击铝合金板的,即玄武岩纤维布对铝合金弹丸的破碎能力优于铝合金板。     

飞行器管路异质界面损伤超声导波传播机理仿真分析

超声导波具有在传播路径上能量衰减小,传播距离远,可以实现大范围、全方位管路监测的优点,在航天飞行器管路监测领域具有巨大的潜在应用价值。建立了飞行器管路损伤和典型管路异质界面(焊缝、充气/充液管路)模型,研究了超声导波在管路损伤和典型异质界面耦合中传播机理,为飞行器管路损伤提取和定量评估提供了有效的分析手段。     

Acceleration tracking control for a spinning glide guided projectile with multiple disturbances

A novel acceleration tracking controller is proposed in this paper, for a Spinning Glide Guided Projectile (SGGP) subject to cross-coupling dynamics, external disturbances, and parametric uncertainties. The cross-coupled dynamics for the SGGP are formulated with mismatched and matched uncertainties, and then divided into acceleration and angular rate subsystems via the hierarchical principle. By exploiting the structural property of the SGGP, model-assisted Extended State Observers (ESOs) are designed to estimate online the lumped disturbances in the acceleration and angular rate dynamics. To achieve a rapid response and a strong robustness, integral sliding mode control laws and sigmoid-function-based tracking differentiators are integrated into the ESO-based Trajectory Linearization Control (TLC) framework. It is proven that the acceleration tracking controller can guarantee the ultimate boundedness of the signals in the closed-loop system and make the tracking errors arbitrarily small. The superiority and effectiveness of the proposed control scheme in its decoupling ability, accurate acceleration tracking performance and anti-disturbance capability are validated through comparisons and extensive simulations.     

Impact point prediction guidance based on iterative process for dual-spin projectile with fixed canards

The fixed canards configuration of a dual-spin projectile makes it difficult to apply the traditional guidance law. In this study, a modified impact point prediction guidance strategy based on an iterative process was developed for a class of dual-spin projectiles with fixed canards, to reduce the impact point dispersion. The guidance strategy is dependent on the modified projectile linear theory to rapidly predict the flight states and the impact point. For projectiles with control applied to the trajectory, the modified projectile linear theory method is known to achieve poor impact point prediction. To improve the prediction accuracy, improvements were made to the modified projectile linear theory by considering the products of the yaw rate and other small quantities. The guidance strategy is based on the iterative process for the continuous adjustment of the expected output of the roll angle of the course correction fuze, to minimize the direction error between the predicted impact point and target location. Studies were conducted on a model dual-spin projectile configuration to demonstrate the guidance details. The numerical simulations indicate that the proposed guidance strategy can effectively reduce the projectile impact point dispersion.     

空军精确制导弹药保障模式与发展方向

空军转型发展对精确制导弹药保障提出新需求,必须转变精确制导弹药保障模式,以适应"空天一体,攻防兼备"战略要求。本文主要分析研究精确制导弹药保障能力建设面临的问题,提出解决问题的对策、改革方向,为空军精确制导弹药保障能力建设创新发展提供借鉴和支持。     

设备构件对射流开孔性能的影响

通过对设备构件的结构布局和射流毁伤特性的详细分析,得到2种设备构件的模拟结构,并开展了对射流开孔性能影响的试验。试验结果表明,采用均匀平板模拟的方式能够较准确地模拟设备构件对射流的影响。研究结果对破甲弹的设计具有较好的参考意义。     

歼击机配装主动雷达制导导弹关键技术研究

结合某型飞机的研制 ,总结了歼击机配装主动雷达型导弹需要解决的关键技术 ,论述了解决这些关键技术的一般技术途径和方法。     

滚转舰炮制导炮弹的空间多约束导引与控制一体化设计

在大口径舰炮制导炮弹打击近岸机动目标的末段,考虑攻击角、控制受限、视线（LOS）角速率测量受限等约束,提出了一种基于块动态面与扩张状态观测器（BDSESO）的多约束空间导引与控制一体化设计（IGC）方法。构建了滚转制导炮弹的空间导引与控制一体化的严块反馈串级模型,运用扩张状态观测器估计视线角速率和目标机动、建模误差、风等系统内外不确定干扰。为了在有限时间内零化视线角跟踪误差与视线角速率,采用自适应指数趋近律设计非奇异终端滑模,通过自适应动态面控制有效镇定串级系统并避免微分膨胀,引入自适应Nussbaum增益函数补偿控制受限的饱和非线性。通过Lyapunov理论证明了视线角跟踪误差、视线角速率的有限时间收敛性与全系统状态的一致最终有界性。半实物仿真实验表明：该方法使制导炮弹在打击具有不同机动形式的目标时,均具备较好的末制导性能。     

增程制导炮弹气动外形设计

依据增程制导炮弹气动外形设计中需考虑的主要问题,分析了火箭助推-滑翔增程制导炮弹的弹道特点,进行了增程制导炮弹的气动外形设计和雷达散射截面(RCS)计算;实验结果表明:在Ma＝2.5~3.5范围内,增程制导炮弹的零阻比原外形方案的零阻约减少了30％;纵向静稳定度从原方案的4.5％提高到了9％;舵偏角与平衡攻角匹配合理,有较高的滑翔增程能力;RCS计算结果表明,在迎面±30及±60范围内,增程制导炮弹都具有较小的雷达散射截面。