消除粘性项高阶离散数值振荡的半结点-结点交错方法

通常的粘性项处理方法是连续两次采用结点型中心差分格式求得.但是,通过两次采用高阶结点型中心格式求得的粘性项易在流场中的"间断"附近产生数值振荡.本文采用多种格式,通过求解一维Burgers方程来充分展示了这种振荡现象.为了消除这种数值振荡,一种半结点型的高阶紧致格式被用来求解粘性项.Fourier频谱分析表明,这种格式具有非常优越的保频谱性能.一维和二维的数值计算结果表明,通过"半结点-结点"交错采用这种半结点型格式的方法可以非常有效地避免粘性项高阶离散可能导致的数值振荡.     

Schemed Power-augmented Flow for Wing-in-ground Effect Craft in Cruise

To provide detailed insight into schemed power-augmented flow for wing-in-ground effect(WIG) craft in view of the concept of cruising with power assistance,this paper presents a numerical study.The engine installed before the wing for power-augmented flow is replaced by a simplified engine model in the simulations,and is considered to be equipped with a thrust vector nozzle.Flow features with different deflected nozzle angles are studied.Comparisons are made on aerodynamics to evaluate performance of power-augmented ram(PAR) modes in cruise.Considerable schemes of power-augmented flow in cruise are described.The air blown from the PAR engine accelerates the flow around wing and a high-speed attached flow near the trailing edge is recorded for certain deflected nozzle angles.This effect takes place and therefore the separation is prevented not only at the trailing edge but also on the whole upper side.The realization of suction varies with PAR modes.It is also found that scheme of blowing air under the wing for PAR engine is aerodynamically not efficient in cruise.The power-augmented flow is extremely complicated.The numerical results give clear depiction of the flow.Optimal scheme of power-augmented flow with respect to the craft in cruise depends on the specific engines and the flight regimes.     

室内无人飞艇系统地面工作站设计

无人飞艇作为重新兴起的飞行器在军事和民用方面具有广泛的应用价值,本文针对异型无人飞艇监测和控制的要求,采用VC＋＋可视化语言为开发工具,在地面站中实现遥测数据接收及显示、采用PID调节实现飞艇按规定航迹飞行、飞艇航迹的实时显示、选择不同飞艇进行飞行任务编辑等功能。     

民用飞机地面支援设备设计探讨

从安全性、经济性和维修性等方面．对地面支援设备设计过程中需要遵循的设计要求进行规定．提出规范的地面支援设备设计要求．供相关设计人员参考。     

Effects of adiabaticity and non-adiabaticity of dust charge fluctuation on the propagation of the dust ion acoustic waves in inhomogeneous dusty plasma

A theoretical investigation has been made for adiabatic positive and negative dust charge fluctuations on the propagation of dust-ion acoustic waves (DIAWs) in a weakly inhomogeneous, collisionless, unmagnetized dusty plasmas consisting of cold positive ions, stationary positively and negatively charged dust particles and isothermal electrons. The reductive perturbation method is employed to reduce the basic set of fluid equations to the variable coefficients Korteweg–de Vries (KdV) equation. Either compressive or rarefactive solitons are shown to exist depending on the critical value of the ion density, which in turn, depends on the inhomogeneous distribution of the ion. The dissipative effects of non-adiabatic dust charge variation has been studied which cause generation of dust ion acoustic shock waves governed by KdV-Burger (KdVB) equation. The results of the present investigation may be applicable to some dusty plasma environments, such as dusty plasma existing in polar mesosphere region.     

捕获轨迹系统并联机构地面标定方法

捕获轨迹系统（CTS）是一种先进的预测外挂物投放轨迹的试验系统，普遍采用六自由度（6-DoF）串联机构作为其运动机构，串联机构因惯性力大和关节累积误差大使其定位精准度不足。相比串联机构，并联机构具有惯性力小和关节误差不累积等优点。采用6-PTRT并联机构作为CTS试验系统的六自由度运动机构，在空间受限的风洞环境中对CTS并联机构进行地面标定：提出动平台位姿的测量和计算方法，建立包含直线驱动平台安装夹角修正的标定模型，并基于非线性最小二乘法辨识结构参数。辨识后CTS并联机构的位移定位准度优于0.1 mm，姿态定位准度优于0.05°，最后以CTS并联机构和常规攻角机构进行8#标模的对比风洞试验。风洞试验结果表明，CTS并联机构的风载定位准度满足测力试验精准度要求。     

对混凝土强度波动的分析与讨论

本文旨在通过对混凝土强度波动的分析和控制方法的讨论，加强混凝土的质量，提高建筑物的整体质量，为提高施工水平和施工队伍技术水平提供依据。     

CTS-26型超声探伤仪典型故障的分析与排除

在简要介绍CTS-26型超声探伤仪工作原理及组成的基础上。对其几种典型故障作了具体的分析和处理。     

γ暴内激波的速度变化

对γ暴GRB960113的高能段与低能段的时间延迟和脉冲宽度进行了分析，结果表明，其随时间有规律地增加和展宽．γ暴的内激波模型可对此现象作出合理的解释。     

连续跌落冲击台的工作原理与调整

阐述了凸轮式跌落冲击装置的结构原理、力学性质、冲击参数及其调整方法。凸轮式跌落冲击台产生的冲击可使试件系统响应的幅值叠加及循环次数增多，因而产生冲击激励现象，引起试件的疲劳损伤。还介绍了清除冲击的方法和恒定实验负荷法。