Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

基于图剖分的多块结构网格负载平衡方法

负载平衡是影响并行计算性能的重要因素。针对多块结构网格,给出了一种改进的多层次图剖分负载平衡方法。该方法设计了新的网格剖分算法,采用改进的子块分裂方法与图剖分算法的循环调用实现结构对接网格剖分,并通过建立不同物体重叠网格间的连接关系,实现了结构重叠网格的负载平衡。采用2个典型算例对方法进行了对比验证,数值结果表明,子块分裂方法对剖分结果具有重要影响,采用循环调用算法及改进的子块分裂方法能有效地实现计算负载均衡及通信量优化,同时显著减少了网格块数及因虚网格导致的内存需求,有利于提高并行效率。该负载平衡方法与网格拓扑无关,适用于多块结构对接网格及重叠网格,且整体型剖分方式对于多块结构重叠网格具有更好的剖分效果。     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

气膜孔内局部堵塞对气膜冷却特性的影响

在吹风比为0.3~1.5,堵塞比为0.1~0.5范围内,对平板上单排倾斜气膜孔内局部堵塞所引起的冷气射流流动和冷却特性变化进行了数值研究,分析了堵塞比、堵塞位置和吹风比对绝热气膜冷却效率的影响.在研究参数范围内的研究结果表明:气膜孔出口端前缘的局部堵塞有利于抑制肾形涡,对气膜孔下游的绝热气膜冷却效率有改善作用,并且随着堵塞比和吹风比的增加,对冷却效果的改善越为明显.而在气膜孔出口端尾缘或侧边的堵塞则在较大的堵塞比下削弱气膜冷却效果.相对于气膜孔出气端的局部堵塞,在气膜孔进气端和中部的堵塞对绝热气膜冷却效率的影响要微弱得多.     

NUMERICAL SIMULATION ON MULTI-FLUID INTERFACES

INTRODUCTIONThe study on phenomenon of multi- fluid in-terface driven by shock waves include:( 1 ) totrack the motion of multimaterial interfaces;( 2 )to simulate the chemical reaction on the inter-faces. As the pioneering work,chemical reactionis neglected in this paper. The objective is totrack the interfaces. Of course,the fluids aretreated as compressible medium under such ahigh impact.Although Eulerian schemes workwell for most gas flows,they have been shownto be too dissipative nea…     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.     

两端固定输流管道在脉动内流作用下参数共振的最优控制

采用压电片作为控制执行元件,对两端固定输流管道在脉动流作用下的参数共振进行了最优控制.基于二次型性能指标最优控制原理,针对离散后的运动方程在零平衡点附近Jacobian矩阵的非时变部分设计了最优控制器.最后,通过数值仿真的方法对控制方案的有效性进行了验证.结果表明,该方案对输流管道在第一、第二振型次谐波共振区域及组合共振区域的参数共振的控制均有很好的效果.     

双向进气结构脉管制冷机直流形成机理

在脉管制冷机中,由双向进气结构诱发的直流流动,不仅会增加冷端换热器的负载,降低制冷机性能,而且还是引起制冷温度不稳定的重要原因。如何有效地抑制直流流动已成为脉管制冷机能否大规模应用的关键。而对直流形成机理进行全面、深入的研究是发展简单、有效直流抑制手段的前提。针对该研究热点,本文开展了双向进气结构脉管制冷机直流形成机理研究,基于流体网络理论,考察工质物性对直流的影响和作用机理,进一步揭示了直流的形成本质。     

Dirichlet边界条件低阶面无法的改进

对基于内部Ｄｉｒｉｃｈｌｅｔ边界条件的低阶面元法的速度分布提出一个改进算法。由极限过程结合高阶奇异积分的解析计算直接计算物面速度分布取代传统的偶强梯度法,以避免偶极强度边缘外推的困难。改进算法改善了ＶＳＡＥＲＯ分析中诱导阻力系数估值过低的问题。对后掠翼、前掠翼和翼身组合体等算例的计算表明,计算结果的准确度与高阶面元法相近。此外,直接积分法还可正确地计算外部流场速度分布。这是偶强梯度法不能完成的。     

复杂构形的亚、跨、超音速定常及非定常气动力的Green函数算法综述

对亚、跨、超音速定常及非定常气动力的 Green函数算法作了简要回顾 ,包括该方法的基本原理、近年来在国内的发展及其在气动弹性和气动载荷计算中的应用等。算例表明该方法适用范围广、计算效率高且比较准确