Cr（Ⅵ）对镍沉淀的影响

采用周期伏安技术，恒电位阶跃法和恒电流阶跃法研究了Ｃｒ（Ⅵ）对镍电沉淀的影响。研究表明，正常镀镍液中，Ｃｒ（Ⅵ）在电极上形成一种“吸附膜”抑制Ｍｉ（２＋）离子的还原，此效应随ｐＨ值降低而减弱，并在一定ｐＨ值下发生Ｎｉ（２＋）离子的沉积。     

Analysis of total visual and CCD V-broadband observations of Comet C/1995 O1 (Hale-Bopp): 1995–2001

We developed a general method for determination of water production rates from groundbased visual observations and applied it to Comet Hale–Bopp. Our main objective is to extend the method to include total visual magnitude observations obtained with CCD detector and V filter in the analysis of total visual magnitudes. We compare the CCD V-broadband careful observations of Liller [Liller, W. Pre-perihelion CCD photometry of Comet 1995 O1 (Hale-Bopp). Planet. Space Sci. 45, 1505–1513, 1997; Liller, W. CCD photometry of Comet C/1995 O1 (Hale-Bopp): 1995–2000. Int. Comet Quart. 23(3), 93–97, 2001] with the total visual magnitude observations from experienced international observers found in the International Comet Quarterly (ICQ) archive. A data set of ∼400 CCD observations covering about the same 6 years time span of the ∼12,000 ICQ selected total visual magnitude observations were used in the analysis. A least-square method applied to the water production rates, yields power laws as a function of the heliocentric distances for the pre- and post-perihelion phases. The average dimension of the nucleus as well as its effective active area is determined and compared with values published in the literature.     

系统辨识的计算机辅助设计实现

探讨了通过脉冲响应法来求取被识别系统的传递函数的过程,给出了计算公式,最后利用MATLAB对计算过程进行了可视化的编程实现。     

应急动力系统的优化

国内飞机首次采用的应急动力系统,在研制过程中对系统的起动信号、工作状态、控制逻辑、设计参数和人机对话等方面进行了改进和优化,使系统的功能更加完善和可靠。     

空间群Pn3mPn3P23子群链耦合系数的计算

本文利用陈金全教授的本征函数法计算了Pn3m Pn3 P2 3空间群的母分系数。最后的计算结果表明 ,用陈金全教授的本征函数法所求得的母分系数确实满足幺正、归一性 ,同时也证明了本征函数法对于求母分系数同样适用     

8802超低频标准相位产生器

８８０２超低频标准相位产生器采用数字技术，用Ｄ／Ａ变换方法产生正弦信号，由单片机控制频率和相位，频率由晶振综合产生，相位可数字预置，频率准确度高至±５×１０￣（－６），相位准确度高至±０．０００２°。介绍了主要技术指标、工作原理、技术特点和误差分析等。     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

高速颤振模型设计中颤振主要模态的判断

颤振模型设计时难以实现完全的动力学相似,需要对颤振主要模态进行合理选择。采用数值分析方法,对颤振模型设计时主要模态的选取问题进行研究。通过各阶模态振型下气动刚度系数的比较、指定运动形式下广义非定常气动力的计算和不同模态截断下颤振结果的收敛特性分析,研究了颤振分析时不同模态运动之间的相互影响,对模态运动引起的气动力和颤振特性变化进行评估。以高超翼面模型为研究对象的数值算例结果表明,几种分析方法所判断的颤振主要模态基本一致。其中基于振型的广义气动刚度系数参数,避免了非定常气动力的计算,可作为颤振模型设计或颤振分析时主要模态选取的快速判断方法。     

三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。