Real-time sensor fault detection and isolation for LEO satellite attitude estimation through magnetometer data

Attitude estimation is a critical component of the Attitude Determination and Control System (ADCS) of any satellite. It is used to convert the sensor observation data to an estimated attitude using filtering algorithms. However, in the presence of sensor faults, the ADCS fails to achieve the desired attitude accuracy. In this paper, the Fault Tolerant Extended Kalman Filter (FTEKF) is proposed to handle this imperfection. In accordance, various filtering steps are included in the FTEKF design to enhance both attitude estimation and sensor fault detection. The developed algorithm can detect and isolate any unexpected sensor faults in real time, which provides a reliable attitude estimation. A comparative study with the classical and robust Kalman filters is performed through numerical simulations in order to validate the effectiveness of the adopted filter in case of magnetometer fault data.     

收敛-扩张喷管中运用次流推力矢量控制技术的计算研究

采用二阶1TVD格式的有限体积法耦合RNGκ-ε湍流模型和非平衡壁面函数求解二维守恒型雷诺平均N-S方程,数值模拟了运用次流椎力矢量控制技术的二维收敛-扩张喷管中的流动现象。计算结果表明,随着喷管压比的增加,次流喷射所产生的激波向扩张段下游移动,且喷管矢量角不断减小到一固定值;次流压比的增加将导致激波向扩张段上游移动,且喷管矢量角不断增加;次流压比对激波和矢量角的影响比喷管压比更强。     

High-cycle fatigue behavior of Co-based superalloy 9CrCo at elevated temperatures

A modified model is developed to characterize and evaluate high-cycle fatigue behavior of Co-based superalloy 9CrCo at elevated temperatures by considering the stress ratio effect. The model is informed by the relationship surface between maximum nominal stress, stress ratio and fatigue life. New formulae are derived to deal with the test data for estimating the parameters of the proposed model. Fatigue tests are performed on Co-based superalloy 9Cr Co subjected to constant amplitude loading at four stress ratios of 1, 0.3, 0.5 and 0.9 in three environments of room temperature(i.e., about 25 °C) and elevated temperatures of 530 °C and 620 °C, and the interaction mechanisms between the elevated temperature and stress ratio are deduced and compared with each other from fractographic studies. Finally, the model is applied to experimental data, demonstrating the practical and effective use of the proposed model. It is shown that new model has good correlation with experimental results.     

Modified fast Fourier transform in FBMC for satellite communications

In this paper,a Doppler scaling fast Fourier transform (Doppler-FFT) algorithm for filter bank multi-carrier (FBMC) is proposed,which can efficiently eliminate the impact of the Doppler scaling in satellite communications.By introducing a Doppler scaling factor into the butterfly structure of the fast Fourier transform (FFT) algorithm,the proposed algorithm eliminates the differences between the Doppler shifts of the received subcarriers,and maintains the same order of computational complexity compared to that of the traditional FFT.In the process of using the new method,the Doppler scaling should be estimated by calculating the orbital data in advance.Thus,the inter-symbol interference (ISI) and the inter-carrier interference (ICI) can be completely eliminated,and the signal to interference and noise ratio (SINR) will not be affected.Simulation results also show that the proposed algorithm can achieve a 0.4 dB performance gain compared to the frequency domain equalization (FDE) algorithm in satellite communications.     

A New Probabilistic Transformation in Generalized Power Space

The mapping from the belief to the probability domain is a controversial issue, whose original purpose is to make (hard) decision, but for contrariwise to erroneous widespread idea/claim, this is not the only interest for using such mappings nowadays. Actually the probabilistic transformations of belief mass assignments are very useful in modern multitarget multisensor tracking systems where one deals with soft decisions, especially when precise belief structures are not always available due to the existence of uncertainty in human being's subjective judgments. Therefore, a new probabilistic transformation of interval-valued belief structure is put forward in the generalized power space, in order to build a subjective probability measure from any basic belief assignment defined on any model of the frame of discernment. Several examples are given to show how the new transformation works and we compare it to the main existing transformations proposed in the literature so far. Results are provided to illustrate the rationality and efficiency of this new proposed method making the decision problem simpler.     

基于碳氢燃料裂解工作的ATR发动机性能分析

提出了一种基于碳氢燃料裂解气体驱动涡轮工作的ATR发动机方案,并对特定裂解气成分的碳氢ATR发动机性能进行计算,获得了裂解气中烷/烯比对发动机性能的影响规律。结果表明,在同一飞行条件下,随着发动机转速上升,推力逐渐上升,比冲基本呈减小趋势;在同一转速下,碳氢燃料裂解气中烷/烯比越大,发动机比冲越高。在烷/烯比4、转速百分比70%条件下,发动机比冲最高达到约7 644 m/s;随着烷/烯比逐渐升高,裂解气比热容逐渐升高。     

基于均匀设计的钛合金化铣工艺研究与应用

化学铣切是一种能使表面形状复杂、加工精度要求高的零件达到加工要求的表面处理方法.简要介绍了钛合金化学铣切的工艺方法,阐述了化学铣切的反应机理,并在均匀设计试验的基础上讨论了化学铣切温度和溶液配方对钛合金产品化学铣切质量的影响.通过实验数据回归分析确定了最优的化学铣切工艺方案,分析表明验证结果与理论是相符的,可应用于实际生产.     

波音767-300ER改装翼梢小翼的翼根翼型气动性能研究

基于波音767-300ER改装翼梢小翼的实际测量尺寸,建立了翼根翼型几何模型,并利用计算流体力学技术在波音767-300ER飞机巡航状态下分析了该翼型的气动性能,获得了在不同迎角时该翼型的压力和速度分布以及升阻比．为翼梢小翼的设计提供了一些理论依据。     

基于兰彻斯特方程的战斗机超视距空战隐身效能分析

随着军事科技的进步,超视距空战逐步成为了现代与未来空战的主要战斗方式.而隐身技术作为提高战斗机空战能力的主要手段之一,正被各国所关注.本文通过分析基于影响图的兰彻斯特微分方程,对战斗机在超视距空战中的隐身效能进行了分析.最后给出算例,计算了不同RCS下的战斗机超视距空战交换比,从而分析了战斗机RCS对战场走势的影响.