复合高斯杂波中距离扩展目标的迭代近似GLRT检测器

 研究了结构化的复合高斯杂波(CGC)背景中距离扩展目标自适应检测问题。针对异质杂波背景中的近似广义似然比检验(AGLRT-HTG)检测器应用于CGC背景中时存在一定的信杂比损失问题,结构化的复合高斯杂波采用自回归过程建模,结合近似广义似然比检验(AGLRT)方法和迭代估计思想,提出了CGC背景中距离扩展目标的迭代近似广义似然比检测器(RAGLRT-CGC)。从理论上分析了极限情况下RAGLRT-CGC虚警概率与检测门限关系的解析表达式。仿真结果表明,在CGC背景中,RAGLRT-CGC对不同多主散射点目标具有较好的鲁棒性,并且检测性能明显优于AGLRT-HTG。     

A study on turbulence transportation and modification of Spalart–Allmaras model for shock-wave/turbulent boundary layer interaction flow

It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent boundary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation(DNS). It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart–Allmaras(S–A) model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S–A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S–A model are obviously improved. Thus it can be concluded that the modification of S–A model with the pressure gradient can improve the predictive accuracy for simulating the shock-wave/turbulent boundary layer interaction.     

机载大功率超导发电机发展现状与展望

新一代飞机对电力的需求越来越大,尤其是定向能武器的使用,将需要兆瓦(MW)级的电源系统。由于超导发电机发电功率大、结构简单、重量轻,是机载大功率用电设备的理想电源。本文综述了机载超导发电机的类型、研究进展和关键技术,分析指出了其未来的发展前景。     

带止裂筋整体翼梁结构的破损安全分析与试验

为了研究带止裂筋整体翼梁结构的裂纹扩展特性,采用ANSYS有限元软件对裂纹尖端应力强度因子进行数值计算,对缩比试验件进行疲劳裂纹扩展试验,当裂纹扩展到止裂筋前时进行剩余强度试验。结果表明:在梁缘条和蒙皮断裂情况下,止裂筋能够降低梁腹板上的应力强度因子幅值,对裂纹扩展起到拟制作用,其能够承担较大的静载荷从而实现破损安全设计,但是用止裂筋阻止疲劳裂纹扩展的效果并不显著;与梁弯曲产生的正应力相比,腹板上的剪应力不足以驱动Ⅱ型裂纹扩展。     

高压涡轮导叶非轴对称端壁优化设计

为使高压涡轮导叶非轴对称端壁造型在减少二次流损失、提高气动性能方面更好的发挥作用,以某一级高压涡轮为研究对象,采用端壁参数化造型、三维Navier-Stokes（N-S）方程流场求解和基于人工神经网络的遗传算法相结合的优化方法对涡轮导叶进行非轴对称端壁的优化设计。优化目标为在控制涡轮导叶进口质量流量、出口马赫数及出口气流角的情况下,导叶出口总压损失系数和出口二次流动能最小化。对比分析优化前后端壁对涡轮导叶出口参数和涡轮级性能的影响。结果表明：优化后得到的非轴对称端壁有效地改善了涡轮导叶通道内的流场,抑制了通道内二次流涡系的发展,降低了导叶出口处的流动损失,涡轮导叶出口总压损失系数降低了14．85％,高压涡轮级等熵效率提高了0．456％。     

动量矩方程的剪切积分解析表示式

本文采用两层涡粘性模型和速度剖面的指数律,导出了可压缩动量矩方程的剪切积分解析表示式,从而大大简化了边界层计算。和其它理论结果相比,本结果更接近于实验数据。     

纹理能量模板若干性质的研究

从实验出发,对纹理能量模板存在的内在规律及其纹理区域变化所具有的特点进行了探讨,从中总结出了一些有用的性质,获得了满意的试验结果。     

Future X-ray astronomy missions of Japan

Japanese future space programs for high energy astrophysics are presented. The Astro-E2 mission which is the recovery mission of the lost Astro-E has been approved and now scheduled to be put in orbit in early 2005. The design of the whole spacecraft remains the same as that of Astro-E, except for some improvements in the scientific instruments. In spite of the five years of delay, Astro-E2 is still powerful and timely X-ray mission, because of the high energy resolution spectroscopy (FWHM 6 eV in 0.3–10 keV) and high-sensitivity wide-band spectroscopy (0.3–600 keV). The NeXT (New X-ray Telescope) mission, which we propose to have around 2010, succeeds and extends the science which Astro-E2 will open. It will carry five or six sets of X-ray telescopes which utilize super-mirror technology to enable hard X-ray imaging up to 60–80 keV. In mid-2010s, we would participate in the European XEUS mission, which explores the early (z>5) “hot” universe.     

焊接导管轨迹焊新工艺

本文阐述了航空发动机导管的焊接新工艺——轨迹焊及其特点、所用的设备、工艺参数、工艺要点、以及焊接过程中易于出现的缺陷和排除方法。