高速开关阀在起落架半主动控制中的应用研究(英文)

To select or develop an appropriate actuator is one of the key and difficult issues in the study of semi-active controlled landing gear. Performance of the actuator may directly affect the effectiveness of semi-active control. In this article, parallel high-speed solenoid valves are chosen to be the actuators for the semi-active controlled landing gear and being studied. A nonlinear high-speed solenoid valve model is developed with the consideration of magnetic saturation characteristics and verified by test. According to the design rule of keeping the peak load as small as possible while absorbing the specified shock energy, a fuzzy PD control rule is designed. By the rule controller parameters can be self-regulated. The simulation results indicate that the semi-active control based on high-speed solenoid valve can effectively improve the control performance and reduce impact load during landing.     

调整参数误差对齿面接触质量的影响

从齿面接触分析(Toothcontactanalysis,TCA)内含的啮合信息分析机床调整参数误差对齿面接触质量的影响,研究机床调整参数误差与螺旋锥齿轮齿面接触分析之间的关联规律.以SGM(螺旋锥齿轮,大轮展成法,小轮变性法加工)调整卡加工的弧齿锥齿轮副为研究对象,分析得到各个调整参数误差引起的齿面接触质量的变化规律.在此基础上,确定对齿面接触质量有较大影响的机床调整参数.      

空间站新型渐开弧面齿轮传动理论及试验研究

针对因空间站大型对日定向装置传动末端齿轮副尺寸大导致的中心距偏移及倾斜偏差问题，提出具有中心距可分性的新型渐开弧面齿轮，具备中心距补偿能力，有效解决末端齿轮传动中心距偏差问题;依据对末端传动指标要求及约束条件，采用渐开弧面齿轮传动技术对齿轮副进行设计、强度校核及仿真分析;设计并开展等比例方案下多套产品研制及多轮次齿轮副寿命试验研究工作，测试传动效率并观察齿轮齿面状态，以验证新型齿轮传动的中心距补偿能力及可行性。研究内容为大型传动机构齿轮副方案设计奠定基础，并为新型渐开弧面齿轮的研制提供参考。     

Bifurcation analysis of dual-sidestay landing gear locking performance considering joint clearance

Sidestay lock mechanism is an important part of landing gear system, and the locking performance can be analyzed based on changes in its stability. However, during numerical continuation analysis of fully-rigid dual-sidestay landing gear without clearance, it has been found that the appearance of bifurcation points does not necessarily imply that both sidestay links can be locked synchronously. This problem reveals the limitations of fully-rigid model with ideally-articulated in solving dual-sid...     

导引头伺服机构消隙齿轮系统动力学特性分析

消隙齿轮广泛应用于导引头伺服机构惯性稳定平台传动系统中，用于消除回程误差，提高传动精度。目前，对消隙齿轮传动系统的动力学分析大多采用数值方法，然而在求解含时变啮合刚度和间隙的强非线性系统时耗时较长。本文利用集中质量法建立考虑时变啮合刚度的消隙齿轮系统动力学模型，通过对模型的无量纲及归一化处理，运用分段的增量谐波平衡法对消隙齿轮传动系统进行分析，并利用四阶Runge-Kutta法进行数值验证，研究了不同参数对消隙齿轮系统动力学特性的影响规律。结果表明:随扭簧刚度的提高，系统谐振频率也提高，且共振幅值降低;随内部激励的增加、阻尼比的减小，系统由周期运动逐渐变为混沌运动，且共振幅值增大。