中心进气转静盘腔的流量分配特性试验

采用实验方法, 对具有中心进气、两个出口的盘腔系统的流动特性进行了研究.获得了静盘与转盘间隙以及转盘外缘小孔的冷气流量.结果表明:盘面出流孔的流量随总流量或转速的增加而增加, 该流量与总流量的流量比随总流量的增加而降低, 随着转速增加而增加.盘面出流孔数量为原出流孔数量的一半时, 流出流量也近似是原流出流量的一半.      

PSE方法在后部加载叶栅绕流稳定性分析及转捩预测中的应用

采用数值求解与实验测量相结合的方法, 分析后加载叶栅绕流的稳定性并预测转捩.推导出正交曲线坐标系下三维扰动波的抛物化稳定性方程, 在风洞实验中测量叶栅叶片表面的静压分布, 并结合测量结果对设计叶栅的流动稳定性进行特征值分析.分析结果表明:(1)后加载叶型能有效推迟转捩, 提高叶栅的变冲角特性;(2)当冲角变化时叶顶流动稳定性的变化最显著, 负冲角流动稳定, 正冲角流动最不稳定.      

遗传算法在飞机着陆调度问题上的应用

用遗传算法对飞机着陆调度问题的两个方面:队列顺序的确定和跑道指派进行了研究.队列顺序采用飞机编号的单一整数染色体编码方案,配合相应的变异、交叉算子,避免了后代非法解的问题.跑道指派则在适值函数计算中,基于对列最短的原则来加以确定,避免了对队列顺序和跑道指派进行分别编码.算例研究了单跑道与双跑道两种情况.计算结果表明,这种编码方案以及变异、交叉算子对这一问题具有很好的效果,可在普通PC机上实现雷达扫描周期内的实时计算要求.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

A Nonlinear Sub-grid Scale Model for Compressible Turbulent Flow

本文采用直接过滤的Navier-Stokes方程组作为可压缩湍流大涡模拟控制方程组。方程组中因过滤产生的高阶相关项用Taylor级数展开近似,但仅保留级数的一阶导数项。这样产生的误差相当于丢失了模型的部分耗散作用,本文用一种动力学非线性亚格子模型来补偿丢失的耗散影响。本文根据Caylay-Hamilton定理导出了一个非线性亚格子模型,模型中包含的系数由动力学模式确定。与传统的动力学Smagorinsky模式相比,这种动力学非线性模型(DNM)稳定性更好,且不需要在统计均匀方向进行统计平均来计算模型系数,因此减少了计算开销。本文用这种非线性亚格子模型对绕双椭球高超声速湍流进行了模拟,并将所得结果与实验值、计算值及理论值进行了对比。结果表明,本文模型可以有效地模拟可压缩湍流流场。     

一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制,在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理,阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试,表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明,微致动器作动可以影响翼型表面的压强分布,从而可用于增升等控制目的。     

航空发动机双转子系统的拍振分析

 在双转子航空发动机中,由于转子系统不可避免地存在不平衡量,当两个转子的转速比较接近时,发动机会出现拍振现象,拍振将引起振动强度过大问题。对双转子系统的拍振进行了研究,分析了拍振的周期性、信号强度及其反向转子特性,阐明了拍振产生的机理和特征,并采用数值仿真和试验对拍振进行了定量分析和验证。研究表明,拍振与双转子转速差和不平衡量的相位因素有关,当转速差小于工作转速的20%时,双转子系统拍振信号的强度较大。     

月球着陆器精确定点及安全着陆技术研究

在未来月球探测中,需要对一些地形复杂的区域进行探测,而在这些区域软着陆,潜在的危险性增加,这就要求着陆时具有较高的定位精度并能够自动避险。当前,由于着陆时定点的误差较大,在小范围安全地域准确着陆很难。研究了一种精确定位、安全的软着陆方式,它在软着陆过程中增加了悬停阶段。在这一阶段中,通过着陆区危险地域的识别、着陆地点位置误差的计算,加上对着陆器横向漂移的控制技术,使着陆地点的精度以及着陆生存率大为提高,能够满足未来月球探测的软着陆要求。     

不同迎角下脊形前体绕流数值模拟研究

脊形前体有较强的背风涡流场,不同的前体形状对前体涡流场和气动力有很大的影响.本文针对脊形前体飞行器大迎角湍流大分离流动计算的困难,采用IDDES混合湍流模型,以及与之匹配的非定常算法,研究了不同来流迎角下脊形前体的气动特性,以及背风涡非定常演化、破裂的细致流动结构.选取了不同脊形角,以及不同上、下高宽比的脊形前体进行计...