飞行员疲劳监测中的人眼定位及状态判别研究

飞行员驾驶疲劳是影响飞行安全的重要因素之一。常用基于人眼识别的方法对飞行员进行疲劳监测，其关键是人眼定位及状态判别。利用改进的平均合成滤波器算法定位人眼，根据模糊综合评价思想，判定人眼睁开闭合状态，根据PERCLOS疲劳检测方法对飞行员进行疲劳监测。实验表明，改进的人眼定位方法具有更高的精确度和鲁棒性，提出的人眼状态判定方法能够满足疲劳监测需要。为最终构建一种机载的、实时的、非接触式的飞行员疲劳监测系统提供了理论基础。     

应急通信中 WSN 的角色及生存性分析

无线传感网（WSN）具有部署方便、灵活健壮的特点,在应急通信场合发挥着重要作用,但复杂恶劣的网络环境对无线传感网的设计和部署提出了更高要求。说明了应急通信的特点,并分析了应急通信中无线传感网的角色及面临的技术挑战。从网络生存性的角度归纳了网络生存性的相关研究工作,并重点探讨了应急通信环境下无线传感网的生存性技术问题。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

考虑可压缩与热传导的壁面函数边界条件及其应用

考虑到可压缩和热传导效应的壁面函数边界条件,被耦合到了采用k-ω两方程湍流模型、用有限体积法求解N-S方程的程序中。壁面函数基于耦合的速度和温度型,并且在边界层内的粘性子区和对数区内一致有效。引入壁面函数边界条件后,通过算例验证在y <100的范围内,得到的物面压力、摩阻、热流与实验结果比较,结果可靠。而无壁面函数边界条件时,要得到相同精度的结果,要求y ≈1。壁面函数的引入,为工程上准确预测飞行器在湍流流动中表面受力与气动热提供了保障。     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

基于间接法在线能力评估和自主规划技术研究

针对运载火箭推力故障条件下的自主救援任务,研究了一种基于间接法的在线能力评估和自主规划方法.构建了以入轨点能量最大为最优性能指标的最优控制问题.通过数值方法探讨了在满足轨道倾角和入轨点路径角约束条件下,入轨点速度、远地点和近地点跟入轨高度之间的关系,设计了一种与入轨高度相关的特征量来对入轨能力进行评估.以近地点最高为救...     

倾转旋翼机直升机状态系统稳定性判断的一种方法

本文建立了倾转旋翼机直升机模式的非线性气弹分析模型,采用数值方法——纽马克法和牛顿—拉斐逊迭代法相结合的方法计算了直升机悬停状态系统对初始条件的响应,通过响应考察系统从初始时刻到任意时刻之间的响应过程,同时判断出系统的稳定性。     

军用飞机环境适应性评价模型

阐述了作战飞机面临的环境,分析了各种环境因素对军用飞机作战性能的影响,建立了军用飞机环境适应性评价指标体系。确定了机场环境剖面和衡量各个评价因素样本数据的方法,并提出了军用飞机环境适应性评价模型,通过实例验证了模型的合理性和方法的可行性。算例和分析结论表明,该模型反映了军用飞机在环境适应性方面的技术要求,同时也为军用飞机在环境适应能力上的改进提供了参考。     

某型航空发动机滑油供油系统压力和流量仿真

利用英国商用流体系统仿真软件FLOWMASTER对在中间状态下某型发动机滑油供油系统的压力和流量进行了仿真,总结分析了不同供油温度对该系统流阻特性的影响趋势,根据仿真结果给出了该系统结构的改进建议。     

航空制造多项目优先级模糊综合评价方法

针对企业多项目并行执行时可能出现冲突,提出多项目冲突优先的模糊综合评价方法,通过建立优先级评定矩阵、分类分解评判因素的层次结构、建立评价集、确定因素权重,最后建立多项目优先级模糊综合评价矩阵,从而确定项目的优先级关系,实现项目冲突消解。并以某型飞机机翼和机身制造项目为例验证了方法的可行性和正确性。