月球软着陆器动力学建模研究

建立准确、实用的月球着陆探测器动力学模型,是制导、导航和控制系统方案设计中的首要工作,文中月球软着陆探测器的推进剂贮箱采用横向对称分散布局的形式,并分析了布局方式对液体推进剂晃动的影响;将贮箱内液体考虑一阶弹簧质量模型,应用虚功率原理建立包含液体推进剂晃动的月球软着陆探测器从动力下降段至最终着陆段的动力学模型,并对动力学下降段进行了数值仿真,仿真结果可为月球软着陆探测器控制系统设计提供理论参考。     

Upper limit of the total magnetic flux in an active region according to the photometric-magnetic dynamical model

The photometric-magnetic dynamical model handles the evolution of an individual sunspot as an autonomous nonlinear, though integrable, dynamical system. One of its consequences is the prediction of an upper limit of the sunspot areas. This upper limit is analytically expressed by the model parameters, while its calculated value is verified by the observational data. In addition, an upper limit for the magnetic strength inside the sunspot is also predicted, and then, we obtain the following significant result: The upper limit of the total magnetic flux in an active region is found to be of about 7.23 × 10²³ Mx, namely, phenomenologically equal to the magnetic flux concentrated in the totality of the granules of the quiet Sun, having a typical maximum magnetic strength of about 12G. Therefore, the magnetic flux concentrated in an active region cannot exceed the magnetic flux concentrated in the photosphere as a whole.     

Comparison of ionospheric F2 peak parameters foF2 and hmF2 with IRI2001 at Hainan

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with quarter-hourly time interval resolution for the diurnal variation, obtained with DPS4 digisonde at Hainan (19.5°N, 109.1°E; Geomagnetic coordinates: 178.95°E, 8.1°N) are used to investigate the low-latitude ionospheric variations and comparisons with the International Reference Ionosphere (IRI) model predictions. The data used for the present study covers the period from February 2002 to April 2007, which is characterized by a wide range of solar activity, ranging from high solar activity (2002) to low solar activity (2007). The results show that (1) Generally, IRI predictions follow well the diurnal and seasonal variation patterns of the experimental values of foF2, especially in the summer of 2002. However, there are systematic deviation between experimental values and IRI predictions with either CCIR or URSI coefficients. Generally IRI model greatly underestimate the values of foF2 from about noon to sunrise of next day, especially in the afternoon, and slightly overestimate them from sunrise to about noon. It seems that there are bigger deviations between IRI Model predictions and the experimental observations for the moderate solar activity. (2) Generally the IRI-predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the experimental results, but there is a relatively good agreement in summer at low solar activity. The deviation between the IRI-predicted hmF2 using CCIR M(3000)F2 and observed hmF2 is bigger from noon to sunset and around sunrise especially at high solar activity. The occurrence time of hmF2 peak (about 1200 LT) of the IRI model predictions is earlier than that of observations (around 1500 LT). The agreement between the IRI hmF2 obtained with the measured M(3000)F2 and the observed hmF2 is very good except that IRI overestimates slightly hmF2 in the daytime in summer at high solar activity and underestimates it in the nighttime with lower values near sunrise at low solar activity.     

复合材料格栅结构的强度分析

复合材料格栅结构是由连续纤维缠绕的斜向及环向肋和蒙皮组成的结构。对ANSYS软件进行了二次开发,分别采用层合板和层合梁单元模拟复合材料格栅结构的蒙皮和肋。根据复合材料格栅结构的几何特征及其载荷分布特征,采用周期对称有限元模型,分别以最大应力准则、最大应变准则和蔡-吴准则和Chang刚度退化准则对轴压载荷作用下的复合材料格栅结构破坏过程进行了强度预测,计算结果表明采用蔡-吴准则预测并结合Chang刚度退化准则的计算结果与试验结果的一致性较好。     

幂律型流体射流破碎建模和实验问题探讨

简要回顾了射流破碎研究的现状,讨论了幂律型流体射流破碎建模和实验的相关问题。射流破碎建模的关键在于依据流体的胶凝结构和组份物性,射流与环境气体之间的作用关系,提炼主要影响因素。射流破碎实验研究的关键在于高分辨率和高速成像技术等光学测试技术。建模和实验的主要作用在于揭示射流破碎的机理,分析相关因素的影响,为喷注器雾化研究提供参考,为燃烧室冷却设计提供依据。     

碰撞试验系统中加速度传感器特性仿真研究

航天器对接机构缓冲能力的强弱直接决定了航天器所受冲击的大小,因此对缓冲机构的性能进行测试/试验具有重要的意义。文章以赫兹弹簧阻尼理论为依据,通过仿真计算,分析了质量、速度对碰撞过程的影响;得到了加速度的频率特性;确定了碰撞试验系统中加速度传感器的选择原则。     

连续激光加热推力器性能的简化解析计算模型

针对具有开放式吸收室的连续激光加热推力器,通过合理简化和分析,建立了一维流推力     

翼柱型装药发动机点火升压过程计算

利用实验获得的翼槽内火焰传播规律经验公式,在Ｐ（ｔ）模型的基础上,建立了翼柱型发动机的点火升压计算模型。计算结果与实测数据吻合较好。同时就点火器流量、推进剂燃速、喷管堵盖打开压强等设计参数对发动机点火升压过程的影响进行了分析。     

地球低纬区边缘大气密度的预测

基于NRLMSISE-00大气模型讨论日地空间环境对地球低纬度地区边缘大气密度的影响,提出预测地球低纬地区边缘大气日平均密度的简化模型法和经验法。简化模型法利用地磁活动和太阳活动的11年准周期特性,通过预测地磁活动和太阳活动的变化规律以预测地球边缘大气密度。经验法则直接利用第23个太阳活动周期的日平均密度变化曲线经过傅里叶变换处理得到日平均密度变化规律曲线,然后将曲线拟合得到不同高度下的密度昼夜波动规律,再利用预测得到的日平均密度即可计算出具体当地时间对应的密度情况。误差分析说明经验预测法比简化模型法精度更高。两种方法均具有较高的精度并且使用方便,可用于地球边缘大气密度的工程化预测计算。     

诱发卫星深层充电的高能电子环境模式研究

文章介绍了与卫星介质深层充电相关的辐射带高能电子环境的主要特征和规律,建立了相应的高能电子环境模式及软件,并运用该模式针对某飞行器的深层充放电危险性进行了分析和评估。结果表明该模式相对于AE8模式更好地反映了高能电子环境的动态特征,与欧空局建立的FLUMIC模式符合较好。该模式与深层充电分析模型相结合,可用于对航天器的充放电异常进行在轨诊断,以及在工程上针对深层充电进行防护设计。