基于压电纤维复合材料的航天器动力学建模与振动抑制

压电纤维复合材料(MFC)在柔性航天器的振动主动抑制中具有很好的应用前景。利用哈密顿原理和压电驱动的载荷比拟方法,建立了带MFC压电驱动的离散形式的刚柔耦合动力学方程,采用线性二次型最优控制(LQR)算法进行主动控制。结果表明：在航天器的柔性体受到脉冲载荷激励条件下,使用MFC驱动器可以实现航天器挠性振动的快速抑制,并且同时保持中心刚体姿态的稳定性,即能够实现挠性振动与姿态运动的协同控制。基于MFC的主动控制方法对于高频响应也具有较好的控制效果。对于柔性占优的航天器,采用MFC的主动控制优于被动控制。本文方法在处理具有复杂柔性体的航天器时更具优势,更适合于工程应用。     

基于时标分解的弹性高超声速飞行器智能控制

考虑弹性高超声速飞行器纵向动力学模型，提出了一种基于时标分解的智能控制方法。考虑刚体状态和弹性模态具有不同的时标特性，采用奇异摄动理论进行快慢时标分解，将模型转换为刚体慢变子系统和弹性快变子系统。针对刚体子系统考虑动力学不确定，基于平行估计模型构造表征不确定逼近效果的预测误差，结合跟踪误差给出复合学习控制策略。针对弹性子系统设计自适应滑模控制稳定弹性模态。通过李雅普诺夫稳定性分析可证系统状态一致终值有界。仿真表明所提出的控制方法能够实现刚弹模态的稳定收敛，且具有更高的跟踪精度、更好的学习性能和更快的收敛速度。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

Visual inspection of aircraft skin: Automated pixel-level defect detection by instance segmentation

Skin defect inspection is one of the most significant tasks in the conventional process of aircraft inspection. This paper proposes a vision-based method of pixel-level defect detection, which is based on the Mask Scoring R-CNN. First, an attention mechanism and a feature fusion module are introduced, to improve feature representation. Second, a new classifier head—consisting of four convolutional layers and a fully connected layer—is proposed, to reduce the influence of information around the area of the defect. Third, to evaluate the proposed method, a dataset of aircraft skin defects was constructed, containing 276 images with a resolution of 960 × 720 pixels. Experimental results show that the proposed classifier head improves the detection and segmentation accuracy, for aircraft skin defect inspection, more effectively than the attention mechanism and feature fusion module. Compared with the Mask R-CNN and Mask Scoring R-CNN, the proposed method increased the segmentation precision by approximately 21% and 19.59%, respectively. These results demonstrate that the proposed method performs favorably against the other two methods of pixel-level aircraft skin defect detection.     

应用能量－Casimir方法研究充液卫星系统的运动稳定性

利用能量－Ｃａｓｉｍｉｒ方法研究了带４个挠性粱的充液卫星系统在无外力矩状态下,关于绕铅垂轴稳态转动的非线性稳定性条件,该条件考虑了液体的涡旋、弹性梁的振动、卫星主刚体的旋转以及流－弹－刚之间的耦合,此外还考虑了离心力与Ｃｏｒｉｏｌｉｓ惯性力的影响。推广了Ｒｕｍｊａｎｔｓｅｖ和Ｍａｒｓｄｅｎ的部分结果,为带挠性粱的充液航天器的运动稳定性总体设计提供了可靠的理论依据。     

飞机复杂蒙皮拉形数值模拟系统开发及关键技术研究

针对飞机复杂蒙皮拉伸成形特点,基于静态隐式算法开发了复杂蒙皮拉形数值模拟系统STRETCH FORM。系统分为前置处理、核心求解和后置处理3个模块。介绍了系统各模块的主要功能以及机构运动、静态隐式有限元算法和接触搜索算法等关键技术理论。利用商业软件MARC和PAM STAMP进行了S形蒙皮拉形的模拟计算对比,并对某型号机的进气道蒙皮零件进行了生产验证,结果表明系统具有较高的可靠性和计算精度。     

构架式天线柔性动力学建模与展开精度分析

构架式可展开天线具有结构非线性强、桁架系统复杂以及运动环节多等特点,通常被视作刚体系统进行建模分析。然而多刚体动力学方法在求解复杂的连杆结构时,难以处理数量大、非线性强的铰接间隙模型,因此并不能准确还原真实的结构特性,给构架式天线的地面展开验证带来很大困难。本文建立了一套适用于该型天线的柔性多体动力学模型,通过引入微小弹性形变来消除铰链间隙对天线展开的影响,并在型面精度方面与期望的天线展开模型进行了比较说明。在确保不影响结构真实性的前提下,通过降阶、引入稳定系数等手段提高了柔性体单元计算效率。通过约束方程的设计与模块拆分求解等方法,消除结构非线性的影响。解决了针对构架式可展开天线的复杂桁架系统强非线性动力学的高精度建模问题,为构架式天线的仿真提供了技术手段。     

飞机蒙皮镜像铣加工稳定性分析

镜像铣技术是近年来提出的一种针对大尺寸薄壁件的加工方法,其加工环保、高效,具有逐步取代传统化铣加工的趋势。针对飞机蒙皮镜像铣加工过程中的颤振问题,首先,根据镜像铣加工特点,建立工艺系统颤振稳定性极限的预测模型;其次,通过有限元方法对蒙皮工件进行模态分析,分析蒙皮不同加工位置动力学特性变化导致的铣削稳定性变化,并通过实验测量获取工件动力学参数,对不同加工位置的稳定性做出预测;最后,开展加工实验,基于非接触测量方法,在线监测镜像铣加工区域的振动位移,通过时、频域信号对加工状态进行辨识,揭示了镜像铣加工过程的稳定性变化及失稳机制,验证了所提方法的准确性,在工程领域具有较高的实用价值。     

简析PW1100G进气道唇口蒙皮损伤修理

以PW1100G发动机进气道为例,简析其主要结构特点,总结整理典型唇口蒙皮损伤的修理方法,并结合实际维修过程中的经验数据,对不同程度损伤修理方法的选用进行梳理。     

机翼后缘柔性支撑结构的拓扑优化

针对机翼后缘柔性支撑结构的多目标拓扑优化问题,分析了柔性支撑结构的优化目标及目标函数,并采用位矩阵表示机翼后缘柔性支撑结构,利用非支配排序遗传算法(NSGA-Ⅱ)对该优化问题进行了求解。在优化过程中,引入连通性分析和相似个体过滤,借助ANSYS对可行个体进行有限元分析(FEA),获得了结构质量、变形性能和承载能力等目标值。通过MATLAB对违约个体进行惩罚,实现了位矩阵表示的NSGA-Ⅱ,得到了一组互不支配的机翼后缘柔性支撑优化结构,可根据实际需求选择这些相应的拓扑结构。结果表明,本方法可为机翼后缘柔性支撑结构的拓扑优化提供可行、有效的解。