飞行员疲劳监测中的人眼定位及状态判别研究

飞行员驾驶疲劳是影响飞行安全的重要因素之一。常用基于人眼识别的方法对飞行员进行疲劳监测，其关键是人眼定位及状态判别。利用改进的平均合成滤波器算法定位人眼，根据模糊综合评价思想，判定人眼睁开闭合状态，根据PERCLOS疲劳检测方法对飞行员进行疲劳监测。实验表明，改进的人眼定位方法具有更高的精确度和鲁棒性，提出的人眼状态判定方法能够满足疲劳监测需要。为最终构建一种机载的、实时的、非接触式的飞行员疲劳监测系统提供了理论基础。     

基于晶体塑性理论的疲劳裂纹起始数值模拟

在疲劳荷载作用早期,材料在晶体尺度出现裂纹的萌生,为了研究疲劳短裂纹的发展,利用Monte Carlo法建立了多晶体晶粒集合的Voronoi有限元模型,并在Ansys Usermat子程序接口下编写了晶体塑性本构方程子程序,修正了以拉伸硬化为主的疲劳裂纹起裂的计算机模拟方法,并结合TANAKA和MURA的位错偶极子模型,模拟了晶粒集合在疲劳荷载作用下的裂纹萌生,最后与文献实验数据对比,这一修正的方法更加符合实验结果和宏观现象.     

负游隙对高速高温薄壁圆柱滚子轴承动态性能的影响分析

计算了圆柱滚子轴承径向游隙为负值时的等效径向预紧载荷,并考虑等效径向预紧载荷下的套圈弹性变形,通过求解包含套圈弹性变形接触变形等效径向预紧载荷的非线性方程组,得到负游隙圆柱滚子轴承内部的载荷分布情况,以及负径向游隙带来的套圈周向应力.以此分析了负游隙对轴承承载性能及疲劳寿命的影响.结果表明:负径向游隙能够有效降低轴承打滑率,但同时也会降低轴承疲劳寿命,因此在负游隙设计时需同时考虑打滑率和轴承寿命,选择恰当的负游隙.     

Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.     

基于断口分析的钛合金轮内部缺陷损伤容限

为进行某轮损伤容限设计,开展了裂纹扩展断口分析和仿真分析研究。由断口分析可知:疲劳源为一处内部自然缺陷;依据疲劳辉纹确定了裂纹扩展速率;在裂纹长度为2 mm附近,裂纹扩展速率明显增大,为第一、第二加载阶段转换区域;裂纹稳定扩展区裂纹长度与裂纹扩展速率呈双对数线性关系;应用列表梯度法和Paris公式法反推了第二加载阶段的疲劳寿命,与该阶段实际循环次数的最大误差是163%。裂纹稳定扩展阶段裂纹扩展仿真值与断口反推值吻合;非稳定扩展阶段仿真值与断口反推值的最大误差为-215%;基于以上研究,合理确定了某离心轮内部裂纹表面扩展停机检测周期。该类轮非稳定、失稳扩展阶段寿命占内部裂纹表面扩展阶段寿命的比例达248%~357%,因此准确计算具有重要意义。     

直升机主起落架疲劳试验技术研究

以直升机主起落架疲劳试验为对象，对试验内容、试验方法、试验实施及试验结果进行分析。通过试验验证确定了起落架的疲劳危险区域，并为优化零件结构提供了依据。     

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

基于损伤力学预估点蚀疲劳寿命有限元法

飞机使用环境谱的不断变化会对机体结构造成腐蚀损伤,工程上难以在外场环境下进行实时损伤检测与疲劳性能试验。点蚀作为腐蚀的初始阶段,危害性大,部位也难以预测。采用损伤力学和有限元相结合的方法,以材料疲劳S-N数据为基础,将点蚀损伤认为是一种初始缺陷,建立基于损伤力学假设的点蚀损伤疲劳寿命预估方法,并提出一种改进型损伤参数反演方法。对点蚀疲劳失效过程进行数值模拟,模拟结果与试验结果吻合,证明该方法应用于金属材料点蚀疲劳问题中是合理的、可行的,为后续实际预腐蚀损伤疲劳研究奠定了基础。     

积木式方法与试验金字塔的历史沿革与发展趋势

采用积木式方法构建试验金字塔是目前已经被广泛接受的用来完成大型飞机结构强度验证的基本手段。本文概述了积木式方法和试验金字塔的发展历程和趋势，介绍了不同型号的美军机在研制过程中所建立的强度验证试验金字塔的统计结果，并且从试验层级、对象、目的和类型等四个方面比较了试验内容的数量与经费占比，由此来说明基础层级试验验证工作在强度验证试验金字塔中重要性和经济性。通过对虚拟试验在强度验证工作中的发展趋势、应用和限制的介绍，为顺利完成相关的全尺寸部件和整机的强度验证提供可靠的保障手段。