带减振器的光纤陀螺惯导系统有限元仿真建模方法

以某光纤陀螺捷联惯导系统的IMU单元为研究对象,利用有限元分析软件包Patran/Nastran建立了含减振器的IMU系统有限元模型。重点介绍了有限元模型中减振器的等效处理方法,比较了模型的随机振动响应计算结果和样机振动试验的实测结果,两者的误差在3.2%以内,证明了有限元建模过程中所使用的减振器等效处理方法的合理性。     

阻燃剂的应用与研究进展

阐述了阻燃材料与阻燃剂得以推广应用并迅速发展的主要原因；分析了应用于阻燃材料中的卤系、有机磷系、磷－氮系（又称膨胀型）或有机硅系等不同类型阻燃剂的阻燃特性及其适用范围；重点探讨了膨胀型阻燃剂的阻燃机理和阻燃特性，并介绍了相关产品的发展动向。为克服卤系阻燃剂的不足和提高环保效果，无卤、高效、低烟、低毒新型阻燃剂合成及其阻燃技术的研究是当今高分子阻燃材料的发展方向，特别是膨胀型阻燃剂和有机硅系阻燃剂的开发与应用将成为21世纪阻燃剂最活跃诉研究领域之一。     

FDI飞机舵面损伤故障全局检测的非线性数学模型

阐述了飞机在单舵面损伤故障下 ,建立故障状态下的数学模型 ,以及同样输入条件下飞机正常运动时的数学模型 ,得到飞机在相同飞行条件下损伤时的气动系数和无损伤正常时的气动系数 ,最终得到气动系数的残差。这将为以后飞机过载残差和角加速度残差奠定基础。论文中结合一定的算例给予证实推论的正确性。     

飞行控制器的多学科综合环境研究

多学科分析与优化已成为近年来飞行器设计的重要研究方法。本文介绍了一个以飞行控制器设计与分析为目的、基于多学科综合的一体化仿真软件包,说明了它的组成、特点及其主要设计问题,并以某飞行控制器设计为例阐明其应用。     

电火工品电磁建模及仿真分析

以常规结构电火工品为研究对象,在分析电磁环境对火工品作用机理的基础上,采用ANSYS HFSS电磁仿真软件建立火工品电磁模型,按照GJB 786-89《预防电磁场对军械危害的一般要求》加载典型电磁能量,从感应射频电流和损耗功率2个层面,分别研究电磁环境对电火工品的安全性影响,并给出仿真结果。     

机翼对自转旋翼机纵向稳定性的影响

为了研究机翼对自转旋翼机纵向稳定性的影响,针对某复合式自转旋翼机,建立了基于状态空间法描述的非线性全量方程数学模型。该模型包含自转旋翼、机身、螺旋桨、机翼和尾翼的气动模型、动态入流模型和稳定性分析模型。运用该模型对比研究了样例自转旋翼机和样例复合式自转旋翼机的纵向稳定性。研究结果表明：机翼的增加对于浮沉模态和短周期模态稳定性是有利的;对于旋翼转速模态稳定性是不利的,在设计复合式自转旋翼机时可以考虑增加旋翼桨尖配重来提高此模态的稳定性。机翼的纵向位置对自转旋翼机的纵向稳定性有显著影响。在机翼纵向位置能满足配平约束条件下,机翼纵向位置越靠后,迎角稳定性越好,但旋翼转速稳定性越差。在设计复合式自转旋翼机时,机翼纵向位置的选择要综合考虑这两个因素进行折中。     

基于POD方法的弯曲扩压通道分离流控制的时空特性分析

为了分析一种运用于压气机内分离流控制的无源脉冲射流控制技术的特点,基于弯曲扩压通道试验模型进行了脉冲射流控制的试验和数值模拟研究,结果均表明当射流频率接近通道内分离涡主频时控制效果最为明显;引入了本征正交分解（POD）技术对无控状态下通道内流场结构进行分析,得到了POD各阶模态的流动结构特征。在此基础上对比分析了定常及非定常控制特点,结果表明：非定常控制方式主要是重分配各阶模态之间的能量,有选择性地强化或削弱某阶模态;定常射流控制则是整体削弱高阶模态,压制通道内复杂流动现象;合理地构建脉冲射流可使能量从高阶模态向平均流模态进行转移,能量的转移通过空间流场结构的重构和模态时间演化特性的序化实现。最后针对POD分析结果进行了验证性试验研究,试验结果部分反映了时空特性的变化规律,提升了POD分析结果的可信度。     

An extended chirp scaling algorithm for spaceborne sliding spotlight synthetic aperture radar imaging

A system impulse response with low sidelobes is critical in synthetic aperture radar（SAR） images because sidelobes contribute to noise and interfere with nearby scatterers. However,the conventional tricks of sidelobe suppression are unable to be exactly applied to the case of spaceborne sliding spotlight SAR due to great azimuth shifts in both time and frequency domains. In this paper, an extended chirp scaling algorithm is presented for spaceborne sliding spotlight SAR data imaging. The proposed algorithm firstly uses the spectral analysis（SPECAN） technique to avoid the azimuth spectrum folding effect and then employs the chirp scaling（CS） algorithm to achieve data focusing, i.e., the so-called two-step approach. To suppress the sidelobe level, an efficient strategy for the azimuth spectral weighting which only involves matrix multiplications and short fast Fourier transformations（FFTs） is proposed, which is a post-process executed on the focused SAR image and particularly simple to be implemented. The SAR image processed by the proposed extended CS algorithm is very precise and perfectly phase-preserving. In the end, computer simulation results verify the analysis and confirm the validity of the proposed algorithm.     

Parametric analyses for synthetic jet control on separation and stall over rotor airfoil

Numerical simulations are performed to investigate the effects of synthetic jet control on separation and stall over rotor airfoils. The preconditioned and unsteady Reynolds-averaged Navier–Stokes equations coupled with a k x shear stream transport turbulence model are employed to accomplish the flowfield simulation of rotor airfoils under jet control. Additionally,a velocity boundary condition modeled by a sinusoidal function is developed to fulfill the perturbation effect of periodic jets. The validity of the present CFD procedure is evaluated by the simulated results of an isolated synthetic jet and the jet control case for airfoil NACA0015. Then, parametric analyses are conducted specifically for an OA213 rotor airfoil to investigate the effects of jet parameters(forcing frequency, jet location and momentum coefficient, jet direction, and distribution of jet arrays) on the control effect of the aerodynamic characteristics of a rotor airfoil. Preliminary results indicate that the efficiency of jet control can be improved with specific frequencies(the best lift-drag ratio at F+= 2.0) and jet angles(40 or 75) when the jets are located near the separation point of the rotor airfoil. Furthermore, as a result of a suitable combination of jet arrays, the lift coefficient of the airfoil can be improved by nearly 100%, and the corresponding drag coefficient decreased by26.5% in comparison with the single point control case.     

Review and propositions for the sliding/impact wear behavior in a contact interface

A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior. It results in contact damage until systems fail, which may cause significant economic losses and catastrophic consequences. The key point of solving this problem is to reveal the coupling damage mechanism of the sliding/impact behavior in typical systems and life characterization under a complicate evolving environment. This has been a hot topic in the area of mechanical reliability. The main work in this paper can be concluded as follows. Firstly, the main industries in which the “sliding/impact behavior” takes place have been introduced. Then, existing studies on the wear mechanism and degree analysis are presented, which includes surface morphology analysis, wear debris analysis, and wear degree measurement. Meanwhile, existing problems in theoretical modeling and experiments in current research are summarized, so as to point out a bright direction for future research on wear prediction. They include interface contact modeling, mathematic coupling mechanism modeling, wear equation establishment, and wear life characterization, which can provide some new ideas for improving the existing studies on the sliding/impact wear behavior.