数据链试飞电波传播衰减计算

数据链作用距离的试飞结果受试验区电波传播衰减影响很大,需要对其进行精确计算,为分析试飞结果提供支持.Fock级数法是计算电波衰减的一种精确方法,本文详细讨论了应用该方法求解试验区电波传播衰减的工程计算问题.     

基于状态空间的流固耦合传热的分析

研究了半无限大管道中定常热物性牛顿流体的处于热充分发展状态的一维的流固耦合瞬时强制对流换热，基于状态空间描述法，发展了上述场合的较简单的封闭解法，得到了三维条件下以下两种情况的分析解：(1)恒稳态；(2)瞬态早期阶段。并对n个流体、m个固体串联的管道中一维的耦合热交换问题给出了一般解法，借助于MATLAB强大的矩阵处理功能，本解法更为快速有效。最后，通过实验测试验证了分析解的结果。     

Distributed online mission planning for multi-player space pursuit and evasion

There are three important roles in evasion conflict: pursuer, target and defender. Pur-suers’ mission is to access targets;targets’ mission is to escape from pursuers’ capture;defenders’ mission is to intercept pursuers who are potentially dangerous to targets. In this paper, a distributed online mission plan (DOMP) algorithm for pursuers is proposed based on fuzzy evaluation and Nash equilibrium. First, an integrated effectiveness evaluation model is given. Then, the details of collaborative mission planning which includes the co-optimization of task distributing, trajectory and corresponding maneuvering scheme are presented. Finally, the convergence and steadiness of DOMP are discussed with simulation results. Compared with centralized mission planning, DOMP is more robust and can greatly improve the effectiveness of pursuing. It can be applied to dynamic scenario due to its distributed architecture.     

一类有正阻尼的强非线性振动问题的近似解

用线化法,权残法和插值摄动法相结合的方法求得了一类有正阻尼的强非线性振动问题的近似瞬态解,精度好。     

电脉冲除冰(EIDI)系统电动力学模型分析

总结了电脉冲除冰(EIDI)系统电动力学模型的研究现状,针对几种常见的计算模型进行了分析,以Bernhart-Schrag模型为例,重点阐述了电动力学模型的理论基础、等效模型的建立以及状态方程的求解,分析了模型的正确性.针对由环状平绕线圈及金属平板构成的EIDI简化系统,Bernhart-Schrag模型可以预测通电线...     

Symmetric Mach reflection configuration with asymmetric unsteady solution

Symmetric Mach reflection in steady supersonic flow has been usually studied by solving a half-plane problem with the symmetric line treated as reflecting surface, thus losing the opportunity to discover antisymmetric flow structures. Here in this paper we treat this problem as an entire-plane problem. Using an unsteady numerical approach, we find that the two sliplines exhibit antisymmetric unsteadiness if the Mach stem height is small while the flow remains symmetric if the Mach stem height is large. The mechanism by which disturbance, generated in the downstream of the flow duct between the two sliplines, propagates upstream is identified and it is also shown that the interaction between the transmitted expansion waves and the sliplines increases the amplitude of the unstable modes. The present study suggests a new type of compressible jet that deserves further studies.     

一类非线性微分方程组奇点稳定的条件

本文讨论了一类非线性电路微分方程组奇点稳定的条件,用线性近似的方法,讨论了方程组(1)中参数P*对奇点稳定性的影响,得到了奇点(P*/Ф,Ф)在P*相似文献   

带源项的守恒系统时间分裂算法定常解的收敛性研究

时间分裂算法很难获得带源项的守恒系统的定常解,本文中,考虑使用基本的隐式方法积分线性、二次和三次源项,研究了时间分裂算法不能收敛到数值定常态的原因.采用一个刚性参数的方式预测定常态的误差,刚性参数依赖于特定的源项.当源项是解的线性函数时,不存在定常态误差;当源项是解的非线形函数时,发现定常状态的误差是刚性参数的单调增加函数.定常态误差的分析将推广到标准k-epsilon双方程湍流模型计算的情况.     

转盘-静盘腔内层流流动的相似分析及其N-S方程数值解

对转盘-静盘系统进行的相似分析表明:转盘-静盘腔内层流流场主要受入口流量数、旋转雷诺数、盘腔间隙系数、密封间隙系数和入口孔径比等5个参数影响。采用SIMPLE法对转盘-静盘系统层流流场进行了计算。结果表明:盘腔间隙的大小和密封冠对旋转核的存在具有决定性影响, 当入口流量数减小或旋转雷诺数增大时, 旋转核趋向于生成且转速增大;证明了影响径向速度的主要是惯性力, 而影响周向速度的是惯性力和粘性力共同作用。通过数值计算还得到了防止外燃气“入侵”的最小入口流量数。      

固溶处理时间对2E12铝合金组织和疲劳性能的影响

采用光学金相、扫描电镜、能谱分析以及疲劳寿命测试等方法,研究了495 ℃/1 h和8 h固溶处理对2E12T₄铝合金微观组织和疲劳性能的影响。实验结果表明,延长固溶处理时间可显著减少基体中可溶的Al₂CuMg残留相数量,提高合金元素的过饱和固溶度,因而,自然时效后合金强度相应增加。试样自由表面上的大尺寸残留相在疲劳加载过程中,通过自身断裂或与基体脱粘的两种方式优先诱发疲劳裂纹萌生;并且,这些大尺寸残留相还起到促进疲劳裂纹扩展和连接的作用,导致疲劳辉纹形成时发生开裂形成二次裂纹,因而,延长固溶处理时间减少大尺寸残留相数量可提高2E12铝合金的疲劳寿命。