电磁线圈发射器垂直发射过程建模与仿真

根据同步感应线圈发射器工作原理,建立了用于垂直发射大载荷的电磁线圈发射器数学模型;以5级发射器为例,对其垂直发射过程进行了动态仿真,得到了放电回路中的电流、发射组件所受电磁力、速度及位移等参数随时间变化的特性曲线。结果表明:电磁线圈发射器(EMCL)垂直发射大载荷过程中载荷的加速过程比较平稳,电流的变化率相对较缓,为几十ms量级;发射组件速度对自身所受电磁力影响较大,随着速度增大,发射组件受到的电磁推力有所下降;随着驱动线圈级数增多,各级驱动线圈放电控制难度加大。但相比电磁线圈炮的超高速发射,EMCL用于低速发射大载荷过程的馈电控制要简单很多。     

战场复杂电磁环境下的无人机作战应用探讨

通过对战场复杂电磁环境的研究,分析总结无人机系统在侦察作战全过程中可能受到各种电磁干扰,结合无人机系统抗干扰特性,提出应对战场复杂电磁环境的无人机系统作战运用方法,有效提高了无人机在战场中的作战效能和生存能力。     

Evaluation of thermal effects on temperature-sensitive operating force of flow servo valve for fuel metering unit

The temperature-induced variation in operating force of flow control valves may result in performance degradation or even jam faults of fuel metering unit (FMU), which significantly affects the safety of aircrafts. In this work, an analytical modeling approach of temperature-sensitive operating-force of servo valve is proposed to investigate the temperature characteristics in varying temperature conditions. Considering the temperature effects, a new extended model of flow force is built and an analytical model of valve friction is also derived theoretically based on the dynamic clearance induced by thermal effects. The extremum condition of friction is obtained to analyze the characteristic-temperature points where jam faults occur easily. The numerical results show that flow force increases firstly and then decreases as temperature increases under a constant valve opening. The maximum friction of flow servo valve can be uniquely determined when the structural parameters and ambient temperature are given. The worst situation just happens at the characteristic-temperature points, which are linearly related to the axial temperature gradients of valve spool. Such evaluations may give an explanation for the temperature-induced jam faults of vulnerable valves and provide a reference for designers to determine a suitable working-temperature range of valves in practice.     

固体运载火箭抗强电磁脉冲优化设计方法

本文分析了火箭在飞行过程中的强电磁脉冲(EMP)环境，建立了箭上敏感设备受强电磁脉冲干扰的优化设计模型，包括传导干扰及辐射干扰两种设计模型。针对起飞质量对火箭总体参数设计的制约问题，以最小质量增量为目标函数，采用模拟退火(SA)算法，对箭上典型电气系统抗强电磁脉冲防护进行优化设计研究，为箭上敏感设备抗强电磁脉冲指标与质量增量提供了平衡选取方法。优化结果表明,火箭在飞行过程中典型电气系统的抗强电磁脉冲性能指标达到要求的同时，实现了火箭质量增量最小的目标。     

论领导干部的表达力

领导干部的表达力,不仅是个人的人力资本,更是组织的宝贵财富。其现实表现具有策略性。通过个人的学习和组织的文化引领,可以实现角色转换、认同、超越,进而改善和提高表达力。     

常闭式电磁制动器驱动结构设计及性能分析

针对常闭式电磁制动器耗能高、制动力密度小、励磁线圈发热严重等缺点，尝试将永磁体引入至制动器驱动结构中，设计出了一种电磁与永磁混合作用的新型电永磁驱动结构。结合有限元软件，采用有限元法分析了其内部磁通量分布并研究励磁线圈电流、气隙及永磁体结构形状等因素对电磁力的影响。结果表明，电磁与永磁两磁场耦合性较好，电磁吸力随电流增加及气隙的减小增幅较大，且同等条件下L形永磁体的电磁驱动结构对衔铁的吸力最大，对电磁制动器轻量化研究具有指导意义。     

Thermospheric winds over Abuja during solar minimum period

Monthly variations of averaged nighttime thermospheric winds have been investigated over Abuja, Nigeria (Geographic: 9.06°N, 7.5°E; Geomagnetic: 1.60°S). The reports are based on Fabry-Perot interferometer measurements of Doppler shifts and Doppler broadening of the 630.0 nm spectral emission. The results were obtained during a period of weak solar activity with the solar flux (F10.7) typically below 70 solar flux units. Inspection of the average monthly thermospheric winds from October 2017 to December 2017 found December meridional winds to be more equatorward than the October and November winds. Zonal winds are eastward with pre-midnight maximum speeds going above 100 m/s. Compared to Jicamarca zonal winds in the Peruvian sector for the same month of October, the magnitude of maximum Abuja zonal wind speed is weaker. We compare the observed diurnal variation with the recently updated Horizontal wind model (HWM 14). Most of the observational features of thermospheric wind diurnal variation are captured in the model variation. The HWM14 generally showed good agreement with the Abuja October and November zonal wind observations but overestimates the December meridional winds. Expected longer period analysis of the results from Abuja will stimulate a better understanding of wind climatology over the West African sector.     

射频接收机电磁敏感性行为级分析方法

提出一种基于简化Volterra级数模型的射频接收机电磁敏感性(EMS,Elec-tromagnetic Susceptibility)行为级仿真方法.利用3阶简化Volterra级数模型对接收机EMS进行分析,根据EMS频响特性,提出一种通用的EMS判据,并给出敏感度阈值仿真求解流程图.弥补了以往在接收机EMS分析时以试验为主,缺乏仿真分析的缺陷.以某双频GPS(GlobalPositioning System)接收机受连续波干扰为例,对带内和带外(包括镜频和互调)敏感度阈值进行求解.仿真结果表明该方法不仅有效、可行,而且减少了敏感度阈值求解所需的内存空间和仿真运行时间,适应于一般射频接收机的EMS分析,在工程技术领域切合实际.     

侧向随动力作用下大展弦比柔性机翼的稳定性

 随动力能够诱发弹性结构发生颤振失稳。以侧向随动力和集中质量分别模拟发动机推力和外挂质量,考虑机翼垂直弯曲-扭转刚度比、集中质量大小、侧向随动力和集中质量的位置以及机翼后掠角和上反角的影响,研究了受侧向随动力作用的大展弦比柔性机翼的气动弹性稳定性。数值模拟所采用的大展弦比柔性机翼非线性气动弹性模型耦合了几何精确完全本征运动梁模型和ONERA动失速非定常气动力模型,该模型考虑了几何非线性、动失速和材料各向异性。模拟结果表明,侧向随动力对机翼颤振可以具有稳定作用,其具体表现依赖于若干变参数的影响,如：减小机翼垂直弯曲-扭转刚度比;发动机吊舱靠近翼根布置;使发动机推力作用点在法向上与机翼弹性轴靠近;单纯的集中质量避免布置在柔性机翼中部,且布置在机翼弹性轴之前或下方,这些设计或布置均有利于提高带发动机吊舱/有效载荷外挂的柔性机翼的气动弹性稳定性。     

介质阻挡放电等离子体气动激励的动量特性

从诱导气流速度和体积力两个方面开展了介质阻挡放电等离子体气动激励的动量特性研究,对不同激励参数下的诱导气流速度进行了测量与结果分析;通过对体积力的实验测量与理论计算,对比研究了体积力的变化规律与主要影响因素.结果表明:等离子体气动激励可以增大气流速度,但随着气流速度的增大,等离子体气动激励的加速效果减弱;激励电压或激励频率增大,体积力均表现为线性增加,但激励电压增大时可以更好的增大体积力;与增大电极内间距相比,增大下层电极宽度可以产生更大的体积力.