全面国产化复合材料在XX旋翼国产化中的应用研究

本文概要地介绍了国产复合材料在XX旋翼国产化的应用研究总体思路,分析了国产复合材料的研究现状。通过国产化复合材料在旋翼桨叶上的设计应用分析,确定了国产材料性能的最低要求,并进行了典型样件—模型桨叶的验证考核。     

某型直升机旋翼轴载荷测试方法研究

某型直升机旋翼轴是驱动旋翼旋转的关键疲劳部件,本文主要介绍了对该型直升机主旋翼轴载荷的测试方法:应变片的选择及测点布置,测试原理,测试结果及分析.     

用Newton子迭代方法计算前飞旋翼粘性绕流

通过求解Navier-Stokes方程数值模拟了直升机旋翼前飞非定常流场，为了同时保证计算的时间精确性和计算效率，时间推进格式采用了双时间推进方法，在该方法中，子迭代过程由十分高效的LU-SSOR方法完成，且使子迭代过程成为Newton子迭代，空间上应用中心平均的有限体积法进行离散，为了模拟前飞桨时间的相对运动，网格布局采用了运动嵌套网格方法，应用本文方法对-悬停流场进行了数值计算，计算结果与实验吻合较好，尽管缺乏实验数据的验证，对-有升力前飞状态的数值模拟结果是可信的。     

变速恒频电源系统的数字仿真研究

建立了脉宽调制型交直交变速恒频电源系统的数学模型，研制了仿真软件，并给出了仿真实例。研究表明，本文的方法和软件可以进行变速恒频电源系统部件级和系统级的仿真分析，为设计和分析该系统提供了有力的工具。文中的方法和软件也可以用于分析恒速恒频和高压直流电源系统，为开发一套完整的飞机电源系统仿真软件奠定了基础。     

单片机控制无刷直流电动机速度伺服系统

介绍了一种稀土永磁无刷直流方波电动机速度伺服系统，该系统以８０９８单片机为核心，外加ＧＡＬ芯片构成控制器，主回路开关器件采用ＩＧＢＴ，用ＥＸＢ８４０驱动，组成功率变换电路，实现了ＰＷＭ波单极半调制方式的电机伺服控制。     

无刷直流电动机的新型自适应模糊神经控制

 为无刷直流电动机提出了一种自适应模糊神经控制方法.这是一种建立在开关控制、模糊控制和自适应控制相结合基础上的控制方法,并用神经网络实现了模糊控制器和自适应机构.在无刷直流电动机的双闭环调速系统中,电流控制器是PI控制器;转速控制器是由1个开关控制器和1个包括自适应机构在内的模糊控制器相结合组成的,且用1个3层前向神经网络离线学习实现了模糊控制器,学习算法采用的是改进的BP算法.用1个单神经元通过在系统运行过程中的动态学习实现了自适应机构,学习算法选用了有监督的Hebb学习算法.由电机所处的运行阶段决定哪一个控制器工作.此控制算法的仿真结果说明,它使系统具有良好的动、静态特性和自适应性.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.     

Electric potential structures of auroral acceleration region border from multi-spacecraft Cluster data

This paper studies an auroral event using data from three spacecraft of the Cluster mission, one inside and two at the poleward edge of the bottom of the Auroral Acceleration Region (AAR). The study reveals the three-dimensional profile of the region’s poleward boundary, showing spatial segmentation of the electric potential structures and their decay in time. It also depicts localized magnetic field variations and field-aligned currents that appear to have remained stable for at least 80?s. Such observations became possible due to the fortuitous motion of the three spacecraft nearly parallel to each other and tangential to the AAR edge, so that the differences and variations can be seen when the spacecraft enter and exit the segmentations, hence revealing their position with respect to the AAR.     

Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.