舷外有源诱饵对抗反辐射导弹模型研究

舰载雷达系统包括多种型号的雷达,在舰艇施放舷外有源诱饵对抗ARM时,不能简单地将其视为单一辐射源目标。通过分析舰载雷达辐射源工作特性,建立了舷外有源诱偏条件下ARM对舰载雷达的攻击模型。仿真结果表明,ARM散落点在舰载雷达周围分布较为密集,可以对舰载雷达系统构成了较大的威胁。     

A hybrid chemical modification strategy for monocrystalline silicon micro-grinding: Experimental investigation and synergistic mechanism

For high performance manufacturing of micro parts and features, a hybrid chemical modification strategy is proposed to decrease critical energy barrier of mechanical removal of hard and brittle crystal material by refining localized machining condition. The strategy, namely UV-light and IR-laser hybrid chemical modification (UVIR-CM) strategy, includes two steps, an ultraviolet light (UV-light) catalytic advanced oxidation and an infrared laser (IR-laser) assisted selective modification based on Fenton liquid–solid reaction for monocrystalline silicon. The modification effects of UVIR-CM strategy were investigated by surface morphology micro-observation, cross-section transmission electron microscopy (TEM) observation, Raman spectroscopy analysis and nanoindentation test. Experimental results demonstrated that varied degrees of laser texturing appeared on different strategy samples’ IR-laser scanned area. And the IR-laser thermal damage has been successfully inhibited due to the refraction and reflection of energy by bubbles in liquid medium. But for the UVIR-CM strategy, a uniform and amorphous silicate layer is detected in a certain boundary. The UV-light promotes oxidation cycle ability of the chemical solution and ensures sufficient oxide modified layer for subsequent step. Attributing to synergism of photochemical, photothermal and kinetic effects induced by IR-laser, the modified layer displays layered structure with about 600 nm thickness, (2.7 ± 0.60) GPa nanohardness, and (93.7 ± 22.9) GPa indentation modulus. And the layered structure is amorphous layer, nanocrystal and micro-twins layer from the surface to the interior of sample. Consequently, it reveals that the subsequent mechanical removal will become easy due to decreasing energy barrier of monocrystalline silicon in selective area. Meanwhile, its original excellent mechanical properties also are maintained under a certain depth. The results contribute to develop a novel combined micro-machining technology to achieve collaborative manufacturing of structure shape and surface integrity for micro parts and feature.     

Dynamic thermal coupling modeling and analysis of wet electro-hydrostatic actuator

The electro-hydrostatic actuator(EHA) used in more electric aircraft(MEA) has been extensively studied due to its advantages of high reliability and high integration. However, this high integration results in a small heat dissipation area, leading to high-temperature problems. Generally,to reduce the temperature, a wet cooling method of using the pump leakage oil to cool the motor is adopted, which can also increase the difficulty of accurately predicting the system temperature in the early desi...     

Calculating the simultaneous effect of ion dynamics and oscillating electric fields on Stark profiles

We calculate hydrogen line shapes resulting from the simultaneous Stark effect of the plasma microfield and an oscillating electric field. Like laboratory plasmas, many kinds of space plasmas are affected by oscillating electric fields with a magnitude similar to that of the microfield. Here we focus on conditions where we expect that the effect of ion dynamics and oscillating electric are both significant. The combined effect of their dynamics on the quantum emitter is retained by a computer simulation coupled to a numerical integration of the Schrödinger equation. Our calculations are applied for conditions and transitions where significant changes in the line shape allow for a diagnostic of the plasma and oscillating field.     

基于电加热膜防冰设计方案的分流环表面换热特性试验研究

分流环表面换热特性对提升防冰设计效能至关重要。针对传统热气防冰方案中试验件与试验方案系统复杂、成本高昂等问题，本文提出了一种新型电加热膜防冰设计方案的分流环表面换热系数的试验方法。根据能量守恒定律，推导出分流环表面换热系数理论公式。试验研究了不同俯仰角、速度、液态水含量（Liqid water content,LWC）以及水滴中位体积直径（Median volumetric diameter, MVD）等对分流环表面换热特性的影响。试验结果表明：前缘区域换热系数随俯仰角先增大后降低，25°俯仰角是明显的转折点；相同喷雾条件下的前缘区域、下表面区域的平均换热系数约是干空气条件下的3倍；分流环前缘的换热系数明显大于上、下表面的换热系数。     

Design of hybrid-electric aircraft with fault-tolerance considerations

The potential benefits of hybrid-electric or all-electric propulsion have led to a growing interest in this topic over the past decade. Preliminary design of propulsion systems and innovative configurations has been extensively discussed in literature, but steps towards higher levels of technological readiness, optimisation algorithms based on reliable weight estimation and simulation-based mission analysis are required. This paper focuses on the integration of a method for evaluating the lateral-directional controllability of an aircraft within a design chain that integrates aero-propulsive interactions, accurate modelling of the fuel system, and mid-fidelity estimation of the structural weight. Furthermore, the present work proposes a strategy for powerplant management in scenarios with an inoperative chain element. Benefits of hybrid-electric propulsion on the design of the vertical tail plane are evaluated involving the analysis of multiple failure scenarios and certification requirements. The proposed application concerns a commuter aircraft.     

航空用不锈钢磨粒流光整加工表面完整性研究

为研究磨粒流光整加工不锈钢闭式整体叶环的表面完整性，通过对电火花制备的不锈钢试样进行加工时间、加工压强及磨料目数的单因素试验，研究3个因素对加工后表面完整性的影响。结果表明：表面粗糙度Ra随着加工时间的增加而降低，从初始时的1.459μm降至60 min时的0.193μm，降低速率越来越慢，最后趋于稳定。磨粒流加工有效去除了加工表面再铸层。显微硬度在加工后明显降低，由450～950 HV降至270～350 HV且分布均匀性得到改善。显微硬度随着加工时间的增加整体上呈降低趋势，并出现了一定的加工硬化现象。在使用不同目数的磨料进行磨粒流加工后，残余应力由拉应力变为压应力。随着加工时间和加工压强的增加，试样表面越平整，抛光效果越好。     

我国空间推进技术研究现状及发展

空间推进是航天器实现轨道机动和姿态控制的动力源.经过60多年的发展,我国在空间推进方面逐步掌握了化学推进、电推进、在轨补加等一系列关键技术,实现了从常规有毒向新型无毒的转变,以及从化学能推进向更高能量密度推进的升级,形成了型谱化空间推进产品,并成功应用于我国运载火箭、载人航天、人造卫星、深空探测、空间防务等领域,支撑了...     

空间低频射电天文天线材质-观测性能分析

15MHz以下的射电天文信号由于受到电离层的阻挡只能通过空间卫星平台进行观测。采用空间展开的电小天线是目前普遍的做法。就电小天线的材质-接收性能方面进行分析，构建了基于材质磁导率、电导率对后端接收机噪声影响模型。通过计算结果比对和就天线材质空间展开难易程度的综合考虑，归纳总结了不同材质对空间低频射电天文观测噪声影响以及展开难度，为新天线的研制提供了数据依据。该项工作将为下一步L1点空间天气监测卫星中的太阳射电观测载荷提供技术支持。