7075-T6铝合金厚板FSW焊缝沿厚度方向上的显微组织演变规律

采用金相显微镜（OM）、扫描电镜（SEM）和背散射电子衍射（EBSD）技术表征7075铝合金厚板搅拌摩擦焊（FSW）焊核中心区的微观结构，研究沿焊缝厚度方向上的显微组织演变规律。结果表明，焊核中心区发生了明显的动态再结晶，由原始粗大的板条状组织转变成了细小的等轴晶；随着距焊缝上表面距离的增加，中心区等轴晶晶粒尺寸呈现逐渐增大的趋势。其中，中心区上部4 mm处的晶粒尺寸最小，仅为7.8 μm；底部19 mm处的晶粒尺寸最大，达18.6 μm。中心区动态再结晶分数随距离的增大而逐渐减小，从中心区顶部1 mm处最大值90.4%减小至底部19 mm处最小值57.5%。受动态再结晶影响，焊核中心区主要以大角度晶界（HAGB）分布为主，且中心区大角度晶界随距离的增加呈逐渐降低的趋势；但每一个典型位置处的大角度晶界分布呈现先增大后减小的趋势，且在45°左右时达到最大值；此外，中心区并没有强取向组织产生。同时，焊核中心区主要以细小、弥散的二次析出强化相η相为主，且二次析出强化相颗粒尺寸随距离的增加而呈逐渐增大的趋势，但二次析出强化相颗粒总体数量却呈相反的趋势变化。     

Study of thermo-fluidic characteristics for geometric-anisotropy Kagome truss-cored lattice

The aim of this paper is to provide a comprehensive comparison of the thermal insulation and heat transfer performance for Kagome truss-cored lattice along two perpendicular orientations OA and OB. Three test conditions are conducted under forced air convection for the titanium sandwich panel fabricated by 3 D printing technology. The thermo-fluidic characteristics are further explored by numerical simulation to reveal the underlying mechanisms of heat transfer enhancement.The results indicate that the orientation OB exhibits better thermal insulation than orientation OA under the identical temperature loading, while the latter outperforms the former by up to 20% higher overall heat transfer performance. In particular, the endwalls and lattice core in orientation OA achieve 9.7% and 22.5% higher area-averaged Nusselt number respectively than that in orientation OB for a given Reynolds number. The heat transfer superiority of orientation OA comes from the unique topology which induces the large scale spiral primary flows, facilitating the heat exchange between the cooling air and the surfaces of sandwich panel. However, the complex flow mixing leads to a maximum of 20% higher friction factor in orientation OA than that in orientation OB.     

飞机CAD／CAM过程中数据流向的探讨

从回顾南飞公公开展ＣＡＤ／ＣＡＭ工作情况入手，对ＣＡＤ／ＣＡＭ过程中数据流向问题进行了探讨，分析了不足之处，提出了改进数据流向的新思路。     

顺逆流向喷流干扰下二体分离气动力风洞实验研究及前体轴向力特性

本文概述了具有顺，逆流向喷流干扰的二体分离气动力风洞实验技术研究。对有喷流干扰引起的前体轴向气动力特性，作了简单的介绍。最后对有顺、逆流向喷流干扰的前体底部流动模型作了定性的描绘，可供理论研究时参考。     

信息融合方法在组网数据处理中的应用

在实际应用中往往采用多测向站来测定位置信息。对多个测向站测量数据的综合处理,关系到如何正确应用所得测向数据信息的重要问题。针对多个测向站的冗余方案,给出了数据融合的应用方法。     

曲面的平坦方向

从数控加工的实际出发提出了曲面微观、宏观平坦方向这一概念产生的必要性,给出了它们的定义及计算方法。作者编制了通用软件,计算了几张曲面的平坦方向,已将这套软件用于生产实际。     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

A Self-organizing Bearings-only Target Tracking Algorithm in Wireless Sensor Network

In the bearings-only target tracking, wireless sensor network (WSN) collects observations of the target direction at various nodes and uses an adaptive filter to combine them for target tracking. An efficient network management is necessary to gain an optimal tradeoff between locating accuracy and energy consumption. This article proposes a self-organizing target tracking algorithm to select the most beneficial subset of nodes to track the target at every snapshot. Compared with traditional methods, this scheme avoids the need for keeping global position information of the network as in greedy selection. Each node judges its future usefulness depending on the knowledge of its own position and using simple mathematics computation. Simulations indicate that this scheme has locating accuracy comparable to the global greedy algorithm. Also, it has good robustness against node failure and autonomous adaptability to the change of the network scale. Furthermore, this algorithm consumes limited energy because only a portion of nodes partakes in the selection at every snapshot.     

利用集群内测距和对目标测向的协同定位方法

当多个飞行器间相对位置测量精度显著高于飞行器绝对定位精度时，在飞行器间增加相对测量，对各飞行器的定位测量协同处理，能提高绝对定位精度。本文针对集群飞行器对非合作目标不能测距而仅能测向的情况，通过在集群飞行器间引入相互测距，来提高集群飞行器自身和对非合作目标的定位精度。对于这种不完整相对测量情况，给出了能提高定位精度的协同定位求解方法，包括非线性静态优化估计和线性化后最小二乘估计方法。这种协同定位方案，不需要进行完整的相对位置测量，对测距和测向在群体相对测量中进行合理分解，降低了飞行器测量设备配置的要求。通过仿真验证了该方法的有效性。     

基于Lagrange方法的单旋翼飞行器动力学建模

为了进行微小型单旋翼飞行器的动力学建模,通过建立多个坐标系来反映各部分间的相对运动.首先,利用坐标变换得到位置、速度及加速度等向量,并代入拉格朗日方程得到运动学模型;然后,对模型进行数值求解,得到飞行器的姿态响应.仿真结果表明,飞行器定点盘旋时合外力为零,能量保持不变;爬升或前飞时有非保守力做正功,能量增大.