群体多属性决策方法及其应用

针对甄选员工这类群体多属性决策问题,将评价属性划分为主观评价属性和客观评价属性,并且假设方案在主观评价属性下的评价值采用区间数的形式来表示专家评价值的不确定性和模糊性。针对每一主观评价属性设定一组与之对应的专家重要性权重值,反映决策者在不同评价属性中的重要性程度,同时考虑到专家评价值的相似度,将专家评价值进行集结得到专家群体关于方案集的决策矩阵。通过计算各方案与理想方案的相似度,据此对方案进行优劣排序。最后给出该方法在员工甄选决策中的应用实例。     

Effect of longitudinal lift distribution on sonic boom of a canard-wing-stabilator-body configuration

After the last flight of the Concorde in 2003, sonic boom has been one of the obstacles to the return of a supersonic transport aircraft to service. To reduce the sonic boom intensity to an acceptable level, it is of great significance to study the effect of lift distribution on far-field sonic boom, since lift is one of the most important contributors to an intense sonic boom. Existing studies on the longitudinal lift distribution used low-fidelity methods, such as Whitham theory, and in turn,o...     

Effects of temperature on drag reduction in a subsonic turbulent boundary layer via micro-blowing array

A comparative study of two micro-blowing temperature cases has been performed to investigate the characteristics of drag reduction in a subsonic flat-plate flow (where the freestream Mach number is 0.7) by means of Direct Numerical Simulation (DNS). With minute amount of blowing gas injected from a 32 × 32 array of micro-holes arranged in a staggered pattern, the porosity of micro-holes is 23% and the blowing coefficient is 0.125%. The simulation results show that a drag reduction is achieved by micro-blowing, and a lower wall-friction drag can be obtained at a higher blowing temperature. The role of micro-blowing is to redistribute the total kinetic energy in the boundary layer, and the proportion of stream-wise kinetic energy decreases, resulting in the thickened boundary layer. Increasing micro-blowing temperature can accelerate this process and obtain an enhanced drag reduction. Moreover, an explanation of drag reduction by micro-blowing related to the micro-jet vortex clusters is proposed that these micro-jet vortex clusters firmly attached to the wall constitute a stable barrier, which is to prevent the direct contact between the stream-wise vortex and the wall. By Dynamic Mode Decomposition (DMD) from temporal/spatial aspects, it is revealed that small structures in the near-wall region play vital role in the change of turbulent scales. The high-frequency patterns are clearly strengthened, and the low-frequency patterns just maintain but are lifted up.     

基于模态缩聚的限位状态驱动机构非线性动力学分析

含限位的驱动机构具有刚度非线性特征，在正弦振动力学试验中，不同试验量级加速度激励下其主频位置、响应放大倍数等动力学特性均会发生变化，需要开展动力学响应分析提前预示非线性影响，指导产品抗力学环境设计。基于模态缩聚理论，发展了一套针对限位非线性问题的正弦振动响应快速分析方法，可适用于各类复杂驱动机构类产品，避免了大规模有限元模型的非线性计算。算例分析表明:该方法可有效预示不同振动输入量级下限位非线性对产品响应特性的影响，反映出典型的非线性频响突变现象，且计算效率高，可为产品力学特性仿真和力学试验的开展提供有力支持。     

Deployment of SMP Miura-ori sheet and its application: Aerodynamic drag and RCS reduction

Origami, such as Miura-ori, is the art of folding two-dimensional materials into complex, elaborate, and multifunctional three-dimensional objects. In this paper, SMP MO sheet are prepared, and the accuracy of deployable process is verified by experiments. The folding and deployable process of SMP MO sheet is divided into 4 stages, and each stage is described in detail. The stiffness of smart deployable stage is characterized by an exponential decline at the beginning and a gradual decrease to 0, and this is similar to the theoretical shear equivalent modulus in the Y direction. The effects of various parameters on strain and stress are also explored. The purpose of studying these mechanical characteristics is to provide driving force reference in application; In terms of application, the flow field and electromagnetic characteristics of MO sheet in different directions are studied. The aerodynamic drag and RCS reduction of MO unit cell and graded MO sheet during the deployable process are evaluated. When the dihedral fold angle is about 45°, the RCS reduction and drag reduction characteristics of MO sheet are relatively optimal, which is most beneficial to morphing aircraft.     

基于边界层燃烧方法的宽速域飞行器内流道减阻研究

为了降低宽速域飞行器的内流阻力，基于边界层燃烧方法，分析了系列进口马赫数条件下二维扩散段总阻力中摩阻和压阻的特性，研究了不同进口马赫数下摩阻和压阻分量对总减阻的贡献、燃烧影响区域和壁面热流密度，探讨了喷射参数对减阻效果的影响，探索了边界层燃烧方法在典型混压式进气道中的减阻应用。结果表明，随着进口马赫数的增加，总阻力中摩阻分量随之增加；边界层燃烧对摩阻和压阻减阻的机理有所不同，壁面附近流场特性变化使得摩擦系数减小，燃烧局部增压对壁面产生的增推效果使得压力系数减小；从总内阻减阻百分比看，在相同燃料/空气当量比下，低马赫数工况下边界层燃烧减阻效果不如高马赫数工况，且在低马赫数工况下，喷嘴附近壁面热流密度会显著增加；在本文所研究的参数范围内，摩阻和压阻对当量油气比更为敏感，而对喷射方向和喷射速度不敏感。     

Compact wideband FSS-absorber-based low-RCS reflectarray antenna

This paper presents a method to realize compact broadband low-RCS Reflect Array(RA) antenna based on a Frequency Selective Surface(FSS) absorber and a reflective metasurface.Such an FSS absorber consists of a resistance-loaded lossy layer and an FSS layer, which is utilized to reach an absorption-transmission response. The bottom reflective metasurface works as a phase array, reshaping the quasi-sphere wave from the feeding antenna into the quasi-plane wave. As a demonstration, the low-RCS RA an...     

Experimental and numerical investigation on opposing plasma synthetic jet for drag reduction

Experimental and numerical studies are carried out to validate the potential of opposing Plasma Synthetic Jet (PSJ) for drag reduction for a hemisphere. Firstly, flow field changes of opposing PSJ are analyzed by comparing the experimental schlieren images and simulation results in a supersonic free stream of Mach number 3. As PSJ is a kind of unsteady pulsed jet, the shock standoff distance increases initially and then decreases under the control of PSJ, which corresponds to the change of the strength of PSJ. Accordingly, the amount of drag reduction of the hemisphere increases initially and then decreases. It is found that there is a short period of “drag rise” during the formation of PSJ before the drag reduction, which is induced by the generation of normal shock waves and the area difference of the cavity wall of PSJ Actuator (PSJA). Secondly, the effects of five parameters, including exit diameter, discharge energy of PSJA, Mach number, static pressure of incoming flow and angle of attack, on drag reduction of opposing PSJ were studied in detail by using numerical method. It is found that the Maximum Pressure Ratio (MPR) has a significant impact on the average drag reduction for a configuration-determined PSJA. For the configuration selected in this study, the flow field of opposing PSJ shows typical Short Penetration Mode (SPM) in a control cycle of PSJ when the MPR is less than 0.89. However, the flow field shows typical Long Penetration Mode (LPM) at some time when the MPR is bigger than 0.89. Relatively better drag reduction is achieved in this case.