空间电源功率调节技术综述

介绍了空间电源功率调节装置(PCU)的分流调节器(SR),蓄电池的充电控制器(BCR)、放电控制器(BDR)和主误差放大器(MEA)的原理和技术现状。阐述了顺序开关分流调节(S3R)、混合型调节和顺序开关分流串联调节(S4R)三种基本拓扑的工作原理,并对三者进行了性能比较,认为S4R是目前最先进的调节技术。讨论了功率调节装置模块化、智能化和小型化的发展趋势并分析了大功率的功率调节装置研制难点。     

脉冲等离子体推力器羽流预测计算研究

为了能够将脉冲等离子体推力器成功地运用于空间,需对其羽流进行研究。将一维 MHD双温放电模型的计算结果作为入口条件,运用DSMC（Direct Simulation Monte\|Carlo ）／PIC（Particle in Cell）流体混合算法一体化模拟实验室PPT羽流。验证计算显示该模 型具有一体化模拟脉冲等离子体推力器羽流的能力。对不同初始放电能量下的羽流场进行模 拟,给出了离子、中性粒子、电子温度、轴线上质量流率和出口平面返流质量流率的变化情 况。计算结果显示高放电能量下返流量更大,同时中性粒子在返流中所占比例也越大。
     

温度对甲基硅树脂基复合材料介电性能及力学性能的影响

研究了不同温度下甲基硅树脂基复合材料拉伸强度及介电性能变化,利用IR和TG分别对甲基硅树脂的耐热性和高温下的化学结构变化进行了分析,通过SEM、EDS对复合材料烧蚀前后表面化学成分和结构进行了表征。结果表明,在室温～1 200℃,复合材料的介电常数(ε)和损耗角正切值(tanδ)随着温度升高都增加;随着温度升高,硅树脂热分解的程度增加,化学结构发生了变化,复合材料拉伸强度下降;随温度升高,硅树脂产生了影响介电性能的游离碳,从而影响了电磁波在复合材料中的传输。     

高能电子辐照下介质-导体相间结构深层充电特性研究

为研究影响介质-导体相间结构深层充电特性的内在因素,设计了不同构型的试验样品,利用90Sr放射源模拟空间高能电子环境对样品进行深层充电辐照试验,测量了充电电位的差异。并借助深层充电三维仿真软件计算介质-导体相间结构在不同几何构型情况下的深层充电电位、电场分布。试验和仿真结果表明,介质最高表面电位以及介质内部最大电场均与介质宽度和高度呈正相关。其他条件不变时,介质越宽,或越高于导体表面,发生放电的风险就越高。在介质与导体侧面存在微小缝隙情况下,介质内最大电场显著增强,易发生内部击穿。而在介质与导体之间的真空间隙内,电场很容易超过击穿阈值,放电风险很大。航天工程应用中为降低此种结构深层充放电的风险,在满足绝缘性能及其他要求的前提下应尽量减小介质的宽度,降低介质与导体间的高度差,并确保介质与导体侧面接触良好。     

电容式多次放电点火系统设计与试验

针对某型二冲程点燃式空气辅助缸内直喷发动机燃用柴油问题,提出了实现单电容连续多次放电点火的方法,研制了直流电容式多次放电点火模块,进行了多次点火功能性验证及点火能量测试.在此基础上,进行了环境温度为6℃下的冷起动试验及3000r/min小负荷性能试验,结果表明:在该环境条件下,采用5次放电点火策略能够使发动机起动成功,在小负荷工况下,增加点火次数有利于改善缸内燃烧,点火提前角在10°~20°之间时,4次点火对发动机动力性、燃油消耗率及排放性能改善比2次点火更明显,当点火提前角提前至30°后,其改善作用逐渐减小.      

介质阻挡放电等离子体的温度测量

在空气介质阻挡放电中,利用氮分子振动谱线和氮分子离子的转动谱线,研究了振动温度和转动温度在两极板间的分布情况。结果表明：越靠近极板振动温度越小,中间振动温度最高;而转动温度在两极板间基本保持不变。     

微分对策理论及其研究现状分析

本文阐述了微分对策在经济和军事领域中的研究和应用,详尽地叙述了微分对策的分类,并采用定量和定性方法对微分对策进行了分析,指出了微分对策的研究难点,对发展趋势作了较为详细的探讨。     

Space observations of comets during solar flares: A possible explanation for comet brightness outbursts

Problems connected with mechanisms for comet brightness outbursts as well as for gamma-ray bursts remain open. Meantime, calculations show that irradiation of a certain class of comet nuclei, having high specific electric resistance, by intense fluxes of energetic protons and positively charged ions with kinetic energies more than 1 MeV/nucleon, ejected from the Sun during strong solar flares, can produce a macroscopic high-voltage electric double layer with positive charge in the subsurface zone of the nucleus, during irradiation times of the order of 10–100 h at heliocentric distances around 1–10 AU. The maximum electric energy accumulated in such layer will be restricted by the electric discharge potential of the layer material. For comet nuclei with typical radii of the order of 1–10 km the accumulated energy of such natural electric capacitor is comparable to the energy of large comet outbursts that are estimated on the basis of ground based optical observations. The impulse gamma and X-ray radiation together with optical burst from the comet nucleus during solar flares, anticipated due to high-voltage electric discharge, may serve as an indicator of realization of the processes above considered. Multi-wavelength observations of comets and pseudo-asteroids of cometary origin, having brightness correlation with solar activity, using ground based optical telescopes as well as space gamma and X-ray observatories, during strong solar flares, are very interesting for the physics of comets as well as for high energy astrophysics.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

太赫兹固态电子器件和电路

随着微电子技术的飞速发展,半导体器件的截止频率已经进入到太赫兹频段,太赫兹电路的频率特性特性得到极大发展。以固态器件为基础的电路的工作频率进入到太赫兹频段。太赫兹固态电子器件与电路技术在空间领域有着重要的应用前景。文章重点介绍InP基三端太赫兹固态电子器件和电路,以及太赫兹肖特基二极管器件和电路的技术发展过程与最新动态。并指出随着器件与电路的整体化与集成化发展趋势,太赫兹单片集成技术是其未来发展方向。