小功率随动系统多用试验台

本文介绍的小功率随动系统多用试验台,是一种试验设备,它拆装组合方便,参数易于调节,可以根据不同的需要对各种实用随动系统进行模拟试验。这种试验台既可对学生进行系统工作情况演示,又可为学生开设有关的毕业设计,有利于提高学生的感性认识和动手能力。     

一般线性阻尼系统的预解式以及模态正交性

本文研究一般线性阻尼系统的振动问题。仅假定系统的质量矩阵非奇异,将系统模态的加权正交关系式作了拓广,并利用相互等价的一次本征方程与二次本征方程间的转换关系,简捷地求得了预解式的各种模态展开式。     

用分域型矩量法分析阻尼介质对壳体塑性动力响应的影响

本文给出分域型短量法，并将其应用于壳体塑性动力响应问题。文中以承受均布冲击侧压的固支长圆柱壳为例，应用分域型矩量法分析阻尼介质对其塑性动力响应的影响。     

加工钛合金大口径深盲孔的研究

钛合金属难加工材料,其深孔加工的难度更为突出,加工质量不易保证。本文通过实验对比,对加工钛合金大口径深盲孔中出现的偏孔、切屑堵塞、切削振动、刀具破损等主要问题进行了分析,提出了解决办法,得出了切削用量的优化参数。由于钛合金的化学亲和作用,深孔加工刀具的导向条表面易于粘附,结果拉伤已加工表面,造成表面粗糙度上升。加大导向条与孔壁的间隙虽可减少导向条表面的粘附,但同时会引起切削振动的加剧。针对这一矛盾,本文着重对加工刀具的导向条分布、导向条与孔壁的间隙以及导向条的选材方面进行了探讨,提出了以非金属导向条代替硬质合金导向条进行钛合金深孔精加工的方法,使得已加工表面的粗糙度大大降低。这些研究结果对实际加工具有一定的指导作用。     

Lock-in phenomenon of tip clearance flow and its influence on aerodynamic damping under specified vibration on an axial transonic compressor rotor

In this study, the lock-in phenomenon of Tip Clearance Flow(TCF) instabilities and their relationship to blade vibration are investigated numerically on an axial transonic rotor with a large tip clearance. The capabilities of simulating instability flow and lock-in phenomenon are verified on a transonic rotor and a NACA0012 airfoil by comparing with the test data, respectively.The lock-in phenomenon is first numerically confirmed that may occur to TCF instabilities when its frequency is close to...     

基于流体网络法的喷管冷却气流量分配计算方法

流体网络法对喷管气膜冷却问题具有独特的优势,但难以反映出入流对冷却气流道静压变化的影响。针对此引入了可反映出入流导致静压变化的管道元件,并基于孔口速度落后角对静压变化量进行了建模。验证算例表明,这一改进使沿程静压变化趋势与实际吻合较好,使冷却气流量分配计算误差降低到0.5%以下。将改进后的流体网络法与主流通道的计算流体力学模拟耦合用于分析喷管冷却气流量分配,与全计算流体力学模拟相比结果差异小于1.2%,且大幅降低计算量;在某型喷管设计中的应用表明,可以有效反映冷却结构改变对冷却气流量分配的影响。      

Flow field design and process stability in electrochemical machining of diamond holes

The metal grille, commonly composed of an amount of diamond holes, has been grow-ingly used as a key structure on stealth aircraft. Electrochemical machining (ECM) promises to be increasingly applied in aircraft manufacturing on the condition that process stability is guaranteed. In this work, a flow field model was designed to improve the process stability. This model is endowed with a variety of flow channel features, together with vibrating feeding modes. The flow field distribution on the bottom surface of the diamond hole was discussed and evaluated as well. The numerical results show that a short arc flow channel could significantly enhance the uniformity of electrolyte velocity distribution and a vibrating feeding of the cathode enables to reduce both fluctuations of the electrolyte velocity and pressure on the bottom surface of the diamond hole. Consequently, the flow field mutations were eliminated. It is verified from the experimental results that a short arc flow channel, when combined with vibrating feeding, is capable of improving machining localization and process stability markedly. What is more, the side gap on the bottom surface of the diamond hole could also be reduced by the abovementioned approach.     

Numerical simulation of aerodynamic interaction for a tilt rotor aircraft in helicopter mode

A rotor CFD solver is developed for simulating the aerodynamic interaction phenomenon among rotor, wing and fuselage of a tilt rotor aircraft in its helicopter mode. The unsteady Navier–Stokes equations are discretized in inertial frame and embedded grid system is adopted for describing the relative motion among blades and nacelle/wing/fuselage. A combination of multi-layer embedded grid and ‘‘extended hole fringe" technique is complemented in original grid system to tackle grid assembly difficulties arising from the narrow space among different aerodynamic components, and to improve the interpolation precision by decreasing the cell volume discrepancy among different grid blocks. An overall donor cell searching and automatic hole cutting technique is used for grid assembly, and the solution processes are speeded up by introduction of Open MP parallel method. Based on this solver, flow fields and aerodynamics of a tilt rotor aircraft in hover are simulated with several rotor collective angles, and the corresponding states of an isolated rotor and rotor/wing/fuselage model are also computed to obtain reference solution.Aerodynamic interference influences among the rotor and wing/fuselage/nacelle are analyzed,and some meaningful conclusions are drawn.     

日地共转扰动似稳结构及其反相和漂移规律的最新证据

日地共转扰动似稳结构及其反相现象在第２１及２２周再次显现，从而证实了上述发现是一种在长达世记的时间尺度内存在的普遍规律。包括１９９１－１９９２年内的百年地磁扰动资料还说明偶数太阳周的共转似稳结构扰动峰有逆太阳自转而线性性漂移的趋向。对即将来临的极小年前可能出现的共转扰动作了试验性的预测。