多操纵面无尾布局飞机横航向控制

通过风洞测力实验,研究了不同操纵面单侧作动和同步差动对无尾布局飞机横航向气动特性的影响.结果表明:在线性段,升降副翼和襟副翼正向单侧作动以及同步差动都具有一定的增升效果,全动翼尖单侧作动使得全机升力系数减小.操纵面作动对偏航力矩控制的规律性不明显,通过比较发现全动翼尖单侧作动对偏航力矩的控制效果要高于升降副翼和襟副翼作动.操纵面作动对滚转力矩具有较好的控制效果.升降副翼和襟副翼正向作动均会带来负的滚转力矩,舵偏角度越大负向滚转力矩越大.升降副翼作动对滚转力矩的控制效率高于襟副翼,全动翼尖作动对滚转力矩的控制效率较低.相比单侧作动,两侧同步差动可以提高滚转力矩控制效率.     

Compound Ceramic Coatings Grown by Micro-plasma Oxidation on Ti-6Al-4V Alloy

Compound ceramics coatings on the Ti-6Al-4V alloy were prepared by the direct current micro-plasma oxidation (MPO) in NaAlO2 solution. The composition and morphology of the coatings were studied with the X-ray diffraction (XRD) and the scanning electron microscopy (SEM), respectively. Inductively coupled plasma atomic emission spectrometer technique was used to analyze the solution features of Ti-6Al-4V alloy in the process of preparation. The results reveal that Al2TiO5 forms in the coatings at the initial stages of MPO reaction, and its content changes rapidly with the reaction continuing: after 20 min, the ceramics coatings are composed of α-Al2O3, γ-Al2O3 and Al2TiO5, but after 40 min, its main composition is of α-Al2O3. The content of Ti in the solution will increase when the MPO time extends, and as will Al in the anode area until, after 30 min, it reaches the maximum and keeps constant from then on. Both substrata of Ti and Al in the electrolyte join the MPO reaction at the initial stage, where the formation of Al2TiO5 happens; but as the MPO reaction prolongs, more and more Al in the electrolyte will take part in the reaction, leading to the appearance of a large amount of Al2O3.     

Synergistic approach of asteroid exploitation and planetary protection

The asteroid and cometary impact hazard has long been recognised as an important issue requiring risk assessment and contingency planning. At the same time asteroids have also been acknowledged as possible sources of raw materials for future large-scale space engineering ventures. This paper explores possible synergies between these two apparently opposed views; planetary protection and space resource exploitation. In particular, the paper assumes a 5 tonne low-thrust spacecraft as a baseline for asteroid deflection and capture (or resource transport) missions. The system is assumed to land on the asteroid and provide a continuous thrust able to modify the orbit of the asteroid according to the mission objective. The paper analyses the capability of such a near-term system to provide both planetary protection and asteroid resources to Earth. Results show that a 5 tonne spacecraft could provide a high level of protection for modest impact hazards: airburst and local damage events (caused by 15–170 m diameter objects). At the same time, the same spacecraft could also be used to transport to bound Earth orbits significant quantities of material through judicious use of orbital dynamics and passively safe aero-capture manoeuvres or low energy ballistic capture. As will be shown, a 5 tonne low-thrust spacecraft could potentially transport between 12 and 350 times its own mass of asteroid resources by means of ballistic capture or aero-capture trajectories that pose very low dynamical pressures on the object.     

基于CFD技术的高效叶栅耦合颤振分析方法

为了考虑叶轮机叶片结构与流体之间的耦合效应,同时提高叶轮机颤振数值研究的效率,发展了一种基于非定常气动力降阶模型(ROM)的叶栅耦合颤振分析方法。该方法运用时域计算流体力学(CFD)技术计算少数几个叶片的非定常气动力,通过系统辨识及一些假设构建整个叶栅振动的非定常气动力降阶模型,并在状态空间耦合叶栅结构动力学方程建立叶栅气动弹性方程,采用特征值和时域仿真分析该系统稳定性。运用该降阶耦合方法对STCF4(Standard Test Configuration 4)以及NASA Rotor67叶栅系统的稳定性进行了计算。通过与直接计算流体力学/计算结构动力学(CFD/CSD)耦合方法和非耦合方法计算结果的比较验证了该方法的准确性,且该降价耦合方法的计算效率相对于直接CFD/CSD耦合方法提高了1~2个量级,为叶轮机气动弹性参数研究、失谐研究以及多模态耦合计算等提供了便利。     

大功率霍尔推力器应用的滤波单元建模分析

放电电流低频振荡的抑制是霍尔推力器应用的主要问题之一,使用RLC滤波单元是抑制霍尔推力器放电电流低频振荡的最常用方法.对于大功率霍尔推力器而言,传统的RLC滤波器存在直流功耗大、发热严重的问题.提出并设计了一种新型耦合电感结构的滤波器,相比于传统的RLC滤波器,耦合电感结构的滤波器通过合理的参数设置存在明显的陷波特性,...     

弹塑性接触问题边界元缩聚法分析

给出了利用隐含对称条件的二维弹塑性边界元分析公式,并应用于弹塑性接触问题分析。根据接触条件列出了弹塑性接触问题迭代求解的耦合方程。利用接触问题局部非线性的特点,将缩聚法用于迭代求解。基于拟线性、双重迭代法的思想,解决了两重非线性相耦合的问题。最后给出了一个算例。     

整体叶盘结构强度减振一体化设计方法

基于软件ANSYS,建立了整体叶盘参数化模型.结合轮盘强度设计应力标准,借助ANSYS优化模块,获得了满足强度要求的最轻整体叶盘模型.分析了整体叶盘的振动特性,研究了轮盘和叶型参数调整对整体叶盘固有频率的影响.在此基础上,研究了通过改变缘板厚度、罩量及叶型厚度等参数使整体叶盘避开低阶激振的结构设计方法.研究结果表明:对于鼓筒约束的整体叶盘,轮盘参数调整可提高整体叶盘低阶耦合振动频率与4E激振频率在最大转速的裕度为2.2%,而叶型参数调整对此裕度的影响可达8%.最终获得的整体叶盘模型在1阶振动避开5E以下激振,并与4E激振频率在最大转速的裕度达10.8%的基础上达到质量最轻,因避频质量增加4.77%,说明整体叶盘结构强度减振一体化设计方法是可行的.      

CCD相机模／数变换位数的分析

模数变换是CCD遥感相机成像链路中的一个关键环节,对这一过程进行深入分析和优化设计将有助于提高CCD相机的整体性能。该文通过建模和仿真分析了不同的模数变换量化位数和不同量化方案对系统信噪比的影响。     

一种变结构自适应中制导律设计

应用广义预测拦截点的概念,基于变结构自适应理论,以相对速度偏角为滑模面,设计了一种新颖实用的变结构自适应中制导律并进行了仿真分析,结果显示导弹各项指标均很好地满足要求,验证了该中制导律的可行性与有效性。     

上下游叶排对压气机转子叶片气动弹性稳定性的影响

使用自行开发的流固耦合程序集,分别考虑压气机上下游叶排的影响对转子叶片气动弹性稳定性进行分析.使用全环气动弹性模型通过叶片在非定常流场中振幅随时间的变化历程计算转子叶片不同振型下的气动阻尼,分析了不同的叶排轴向间距下尾迹和势干扰对气动阻尼的影响规律.通过将考虑转静干涉效应的气动阻尼与单转子的结果作比较,总结了转子-静子结构和导叶-转子结构的干涉作用对转子叶片颤振特性的影响规律.结果表明:对于1阶弯曲模态,转子叶片气动弹性稳定性不随轴向间距单调变化;上游尾迹干涉作用和下游静子势干扰的增强会加剧1阶扭转模态失稳,但是却促进1阶弯扭耦合模态气动弹性稳定.